MSI

How does the oil in the steering rack work? Valves in the steering rack or box open whenever the driver turns the wheel, allowing oil into the cylinder. The oil works a piston that helps to push the steering in the appropriate direction. As soon as the driver stops turning the wheel, the valve shuts and the pushing action of the piston stops. How does a steering wheel work on a tank? A steering box push a rod to the left which is connected to the wheels which push the wheels left to turn the vehicle. Tanks can have a...

What is number matching engine? In most cases, those who use the term 'matching numbers' are referring to the fact that the transmission and the engine have the same sequence numbers as the VIN (vehicle identification number) assigned to the chassis. What is the purpose of engine number? The engine number provides important information about the make, date and version of the engine so that any kind of vehicle maintenance will conform to the engine's specifications. The first three numbers are the engine code and the remaining numbers identify the engine. How to tell if the numbers match on a...

Do Ford wheels fit Renault? PCD for Renault is 100, Ford is 108 so no they won't fit. Do all alloys fit all cars? Every vehicle has a compatible rim width range (not a fixed width). The lower the offset is, the further out the alloy wheel will sit on the vehicle. The higher the offset is, then the further in the alloy wheel will sit on the vehicle. Every vehicle has a compatible offset range (not a fixed offset). Do Fiat 500 wheels fit a Ford Ka? 2012 Ka is PCD 4x98 same as the Fiat 500 basically the...

Are there any problems with the Volvo D Jet? Fortunately, after such a long time, there are few difficulties which have not been encountered and previously documented. The material compiled here is in addition to the comprehensive documentation and troubleshooting information in the green Volvo factory manualas well as the Volvo Fuel Injection Fault Tracingbooklet. When was the last D Jetronic motor used? The system was first used on the 1967 VW Type 3 motors. Bosch continued development of the system, and it was last used in the D-Jetronic form in about 1976. How many seperate pipe does a Volvo...

What causes a Cummins diesel engine to bleed? Air in the system can manifest itself in very hard starting, poor idling, and smoke from the tailpipe. Earlier model Cummins turbo-diesels require a manual bleeding, while later era Cummins diesels have an automated bleed procedure. When to use manual bleeding of fuel lines? No manual bleeding of fuel lines is required. NOTE: Manual bleeding is required if: The fuel filter is not filled prior to installation. Injection pump is replaced. High pressure fuel line connections are loosened or lines replaced. Initial engine start up or start up after an extended period...