Easy lifehacks

Why does my truck make a grinding noise when I turn the wheel?

Why does my truck make a grinding noise when I turn the wheel? If your wheel bearings are worn, it can cause a grinding noise while turning the vehicle. Poor steering and handling and uneven tire wear are just some of the effects of failing wheel bearings. How to check front end noise while driving Ford F-150? HOW TO CHECK FRONT END NOISE WHILE DRIVING FORD F-150 - BAD WHEEL BEARINGS NOISE! - YouTube HOW TO CHECK FRONT END NOISE WHILE DRIVING FORD F-150 - BAD WHEEL BEARINGS NOISE! Why does my car make a noise when I rotate the...
Other

Where was the 2001 Ford Excursion last serviced?

Where was the 2001 Ford Excursion last serviced? Mileage: 218,343 miles Body Type: SUV Color: Black Engine: 8 Cyl 7.3 L No accident or damage reported to CARFAX. Purchased on 02/14/01 and owned in TX until 05/24/21. Driven an estimated 25,676 miles/year. Last serviced in Coleman, TX on 04/09/21 • Vehicle serviced • Emissions or safety inspection performed. Which is the best Ford Excursion to buy? The Ford Excursion not only the best SUV that I have owned, but it is the best all-around SUV that I have driven, & there have been many from the old IH Scout, GMC...
Easy tips

How do you program a Ford Edge door code?

How do you program a Ford Edge door code? To reprogRam the keyless entry pad on a Ford Edge, type in the factory code found in the owner's manual. Within 5 seconds, press the 1-2 button, and enter 5 digits that are personal and simple to remember. New numbers must be pressed within 5 seconds of one another to be stored by the Edge. How do you use a Ford Edge door code? How to program your keyless entry keypadEnter the factory-set code.Within five seconds, press the 1-2 button on the keypad.Enter the personal, five-digit code you'd like to use....
Common questions

Is the 2008 Ford Focus SE reliable?

Is the 2008 Ford Focus SE reliable? So reliable Performance 5.0. Value for the money 5.0. Exterior styling 5.0. Reliability 5.0. What are the features of a 2008 Ford Focus? Description: Used 2008 Ford Focus SES with USB Inputs, Tire Pressure Warning, Rear Bench Seats, Audio and cruise controls on steering wheel, Aux Audio Inputs. Great Deal! Accident History: This vehicle has 0 reported accidents. Number of Previous Owners: This vehicle has 2 reported owners. Usage Type: This vehicle was used by an individual. When did the Ford Focus fuse box come out? In this article, we consider the second-generation...
Easy tips

What do you need to start a Ford F150?

What do you need to start a Ford F150? You can't post conmments that contain an email address. For the factory system ( PATS ) you only need to start the truck with a key programmed to the truck. This should be 1 of the 2 keys that you got with the truck. Why does my 2010 F150 not start up? I just had this happen to my 2010 F150 5.4L. The #27 fuse was fine. The fuel pump module was fine. It would crank and start, then it would immediately die. No check engine light came up, just the...
Easy lifehacks

Where are the fuses in a 2011 Ford Edge?

Where are the fuses in a 2011 Ford Edge? Fuse box location The fuse panel is located behind a trim panel on the left side of the driver's footwell near the parking brake. How do you remove fuse cover on Ford Edge? To remove the fuse panel cover, press in the tabs on both sides of the cover, then pull the cover off. To reinstall the fuse panel cover, place the top part of the cover on the fuse panel, then push the bottom part of the cover until it clicks into place. Gently pull on the cover to make...
Most popular

How do I change the speed limit on MyKey?

How do I change the speed limit on MyKey? 1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed. 2. Press and release the RESET button to display MyKey™ setup menus. 3. If you don’t want to change the maximum speed setting, press the SETUP button to display the next menu. The remaining menus appear as How do I set my speed limit to 80 mph? Use the arrow buttons to get to a feature. Press OK or > to make a selection. On some models the 80 is the top limit and cannot be removed without a dealer or...
Easy lifehacks

Why did my car go into safe mode?

Why did my car go into safe mode? Failing code circumstances or "Safe Mode" happens when the computer of a vehicle has an issue with the logic. The transmission will function usually as long as the computer receives signals from the MAP, TPS, car velocity and other sensors falling within their "ordinary" ranges based on present circumstances. What is limp mode Ford Fusion? Limp mode engages when a vehicle sensor indicates that a vital component is not working properly. By modifying the vehicle's acceleration and shifting capabilities, limp mode allows drivers to navigate their Ford vehicles home, or to a...
Easy tips

Is the Ford F-250 Super Duty a PowerStroke?

Is the Ford F-250 Super Duty a PowerStroke? This 2001 Ford F-250 Super Duty built by Brett T. features several performance and visual upgrades! Under the hood, this 7.3L Powerstroke breathes through an SandB Cold Air Intake and MBRP 4" Exhaust System. With front and rear performance leaf springs and an ATS Torque Converter this truck fits the 35x14.50x22 tires and moves them with no issues. Is the Ford F 350 a heavy duty truck? The Ford F-250/F-350 is part of the Ford F-Series Super Duty lineup of heavy-duty trucks. Read more Ford reviews to learn about other models. This...
Most popular

How do you change the door code on a 2017 Ford Escape?

How do you change the door code on a 2017 Ford Escape? How to Change the Keyless Entry Code for a Ford EscapeEnter the permanent keyless entry code on the numeric keypad. The keypad is located on the driver's door, just under the handle. Press the number 1 on the keypad. Enter your new keyless entry code immediately. Are there any problems with the Ford Escape? Ford Escape 2017 Engine problems, defects and reviews. Updated October 12, 2017 Engine Ford 2017 Ford Location Sheridan, CA Model Escape System Engine Speed 0 What happens if I lose the factory code on...