Easy lifehacks

Are there any symptoms of a p0404 DTC?

Are there any symptoms of a p0404 DTC? There may be no symptoms of a P0404 DTC other than the MIL (malfunction indicator lamp) or check engine light. However, Exhaust Gas Recirculation systems are inherently problematic due to carbon buildup in the intake manifold, etc. Is the p0404 valve on my Malibu gone? I have a 2002 Chevy Malibu LS with the 3.1L V6 engine. I had a p0404 code and when I did my tune-up recently, I went ahead and replaced the EGR valve. However, after two days of normal driving (approx. 70mi each day), the code has not...
Easy tips

Why is my check engine light on after changing thermostat?

Why is my check engine light on after changing thermostat? This can be caused by a defective coolant sensor, radiator partly clogged, fans not working, thermostat or internal engine head problems. The system should be checked with an infrared temperature probe to see if the temperature of the engine is close to that the computer is seeing from the coolant sensor. Can a thermostat cause a check engine light? The most noticeable issues occur when the thermostat gets stuck in either the open or closed position. A malfunction can result in a trouble code, generated by the engine's computer, which...
Most popular

Where is the power inverter located on a Chrysler minivan?

Where is the power inverter located on a Chrysler minivan? The problem is I'm trying to locate the physical inverter unit in the car.I have in the mean time found out it is located above the left rear fender.I pulled the panels out and discovered the connector plug but the unit is MIA.I searched on Ebay and found several,I'll pick one up for $35.00 free shipping. Welcome Randy. When did the Chrysler Town and Country Voyager come out? In this article, we consider the fifth-generation Chrysler Town & Country (Voyager), produced from 2008 to 2016. Where are the fuses in...
Easy lifehacks

How do you say thank you for being paid?

How do you say thank you for being paid? Example Sentences for Step 1 Thank you for the payment of $50.65. This clears your account. Thank you for your final payment on your appliance account. We appreciate the prompt manner in which you have made these payments. What means paid with thanks? It means that the bill has been paid. If someone was to accuse you of not paying it, you have the receipted invoice to show them as proof of payment. If paid with thanks is written on the invoice and signed and dated by the issuing company or...
Other

How to replace the power steering pump on a Dodge Intrepid?

How to replace the power steering pump on a Dodge Intrepid? Reinstall the three bolts that secure the pump body to the engine bracket. Torque the bolts to 40 ft. lbs. Attach the power steering pressure hose to the pump body, by screwing the retaining nut on the hose to the outlet port on the pump. How do you remove a power steering pump? Loosen and slide back the hose clamp on the power steering inlet hose, using needle-nose pliers. This will be the hose on top of the pump, near the pulley. Pull the hose off the pump. Loosen...
Most popular

Why do we need town and countryplastics?

Why do we need town and countryplastics? With our flexible design capabilities and wide range of products, we can provide every product and component you need for your water control, handling and neutralization system. That takes the hassle of finding multiple suppliers off your plate, while giving you a single source to turn to when you need support. Where are people worried about Nestle taking water? From California to Maine, residents and environmentalists are increasingly worried about Nestlé’s impact. In Fryeburg, Maine, resident Nickie Sekera says the small former timber town’s fire department once offered a spigot from which residents...
Common questions

How to determine the number of pin combinations?

How to determine the number of pin combinations? Use the Key Gauge to Determine Pin Combinations A With key cuts facing up, slide key into the opening of key gauge, located near the number “0.” Move key to first cut, or notch, from the key bow. B Slide key left until it stops on a number. C Write down number and proceed to the next cut. Where is the first cut on a key gauge? Use the Key Gauge to Determine Pin Combinations A With key cuts facing up, slide key into the opening of key gauge, located near the...
Other

Why does EGR valve keep failing?

Why does EGR valve keep failing? EGR valves can become stuck 'open' or 'closed' due to a build-up of soot particles, carbon deposits and dirt from fuel. Motorway driving conditions are the most favourable to your EGR valve as longer, faster journeys allow the engine to get hot enough to get rid of carbon deposits. Why does my EGR have a high percentage of purge? This may be due to an EGR valve that is stuck partially open or a malfunctioning EGR position sensor. EVAP PURGE = EVAP_PCT: This parameter is displayed as a percentage and is normalized for all...
Common questions

How much can a 2013 Town and Country pull?

How much can a 2013 Town and Country pull? The Chrysler Town & Country comes with an optional Towing Prep Package that allows the minivan to tow up to 3,600 lbs. when equipped with the largest available engine. The Towing Prep Package includes a trailer wiring harness, better engine cooling and upgraded load-leveling suspension. How much weight can a 2013 Dodge Grand Caravan tow? 3,600 lbs 2013 Dodge Grand Caravan/Towing capacity What kind of travel trailer can a Dodge Caravan tow? The Dodge Grand Caravan is a minivan with a solid motor and is able to tow a travel trailer of...
Easy lifehacks

Why does the vibration go away at high speed?

Why does the vibration go away at high speed? Since it goes away at high speed I guess its not a balance issue. Tire shop guy said that it could either be a bad shock or that one of the belts in a rear tire is starting to go. At high speed the wheel expands and stretches out the belts so the vibration goes away. Why is my rear tire vibrating at high speed? Tire shop guy said that it could either be a bad shock or that one of the belts in a rear tire is starting to go....