MSI

Where was the 2001 Ford Mustang GT last serviced? 1st owner drove an estimated 5,168 miles/year • 2nd owner drove an estimated 0 miles/year. Last serviced at 99,491 miles in Henderson, NV on 08/13/20 • Vehicle serviced. Which is faster a 2001 Mustang or a 2001 GT? This means that the GT is one quick car. Its 0 – 60-mph time of 6.0 seconds is 0.8 sec. quicker than the last GT we tested (R, April 1996). Handling has improved, too. The 2001 GT tops the old Mustang in the slalom — 63.7 mph versus 62.1, and the skidpad —...

What makes a fuel pump have a low voltage? The only items in this circuit are the fuse, the relay, the inertia switch, and the pump. Low voltage to the pump can only be from a low voltage at the source or a resistance in the circuit (“dropping” voltage). What should the voltage be at the fuel pump relay? You should have 12 volts at the dark green/yellow wire at the fuel pump relay. The inertial fuel shutoff switch is between the relay and the fuel pump. The pink/black wire from the inertial switch to the fuel pump should have...

How do you get to the camshaft phasers? To gain access to the camshaft phasers, various engine accessories must first be removed. This is actually the most time consuming part of the whole project because of the amount of intake plumbing, wiring, and vacuum lines stopping you from getting to the valve covers and cam chains. Disconnect and remove the intake tube. How is the phaser attached to the timing chain? The phaser is aligned with a dowel pin, so it will only go on one way. At the same time, position the timing chain onto the phaser sprocket, making...

How do you diagnose a bad USB port? Method 1: Use Device Manager to scan for hardware changesClick Start, and then click Run. Type devmgmt. In Device Manager, click your computer so that it is highlighted.Click Action, and then click Scan for hardware changes.Check the USB device to see whether it is working. What causes a USB port to fail? A computer's USB ports might not work because of internal hardware issues, improper software configuration, problems with a previously connected device or use of an incompatible USB extension cable. Can a USB port go bad? When you connect a device...