Easy tips

What kind of engine did the 1971 Chevelle have?

What kind of engine did the 1971 Chevelle have? Other engine options available for the Malibu were two 350 cubic inch V-8s producing either 245 or 270 horsepower. The 402 cubic inch motor (now known as the 400) produced 300 horsepower. For the 1971 model year, there was only one SS package, known as the RPO Z15. What was the non SS option on a 1971 Chevelle? In 1971, all non-SS optioned Chevelles received the knobs without function symbols, these did not appear on all Chevelles until the 1972 model year. Non SS optioned Chevelle Malibu sport coupes, convertibles, and...
Common questions

What kind of engine did Ford have in 1949?

What kind of engine did Ford have in 1949? The engine was moved forward to make more room in the passenger compartment and the antiquated " torque tube " was replaced by a modern drive shaft. Ford's popular 226 CID (3.7 L) L-head straight-6 and 239 CID (3.9 L) Flathead V8 remained, now rated at 90 hp (67 kW) and 100 hp (75 kW), respectively. What kind of transmission did Ford have in 1951? The 1951 Fords featured an optional Ford-O-Matic automatic transmission for the first time. Ford finally answered the Chevrolet Bel Air and Plymouth Belvedere charge with the...
Other

What is a 1979 Thunderbird worth?

What is a 1979 Thunderbird worth? **Figure based on a stock 1979 Ford Thunderbird valued at $4,400 with OH rates with $100/300K liability/UM/UIM limits. Actual costs vary depending on the coverage selected, vehicle condition, state and other factors. How long is a 1978 Ford Thunderbird? The 1978 Ford Thunderbird measures 78.50 inches in width, The 1978 Ford Thunderbird measures 215.50 inches in length, and has a wheelbase of 114.00 inches. How much does a 1977 Thunderbird weigh? FeaturesEngine Location :FrontBody / Chassis :Separate body on perimeter boxProduction Years for Series :1977 - 1979Price :$5,060-$7,995Weight :3910 lbs | 1773.546 kg What...
Easy lifehacks

How do you fill a MGB transmission?

How do you fill a MGB transmission? Get a plastic hose a long one. Connect a funnel to one end. Insert other end in hole on side of transmission (keep drain pan under transmission fill hole/ Attach funnel to window area and pour in your 20/50 oil. After a three quarts start checking to see if oil is coming out of fill hole. Can you grease rack and pinion steering? Lubricating a rack and pinion. The rack is filled with oil or grease, but does not usually need regular maintenance. It needs re-lubrication if you remove or replace a rack...
Common questions

How much is a Rolls-Royce Shadow?

How much is a Rolls-Royce Shadow? The Rolls-Royce Silver Shadow is available from $20,200 to $27,500 for the 1981 Sedan across a range of models. Interested in a Rolls-Royce Silver Shadow? When was the first Rolls Royce Silver Spirit made? The Silver Spirit is a full-size luxury car produced by Rolls-Royce Motors, in Crewe, England, from 1980 to 1999. It was the first model in the SZ series. What makes the Rolls Royce Ghost so special? True to its message of being a standout, the Rolls-Royce Ghost offers engineering excellence and a one-of-a-kind motoring experience. With each Ghost model hand-built...
Easy lifehacks

What kind of paint does a 1972 Lincoln Mark IV have?

What kind of paint does a 1972 Lincoln Mark IV have? 1972 Lincoln Mark IV | Triple black, very nice paint, new leather, 38,700 miles, new radials, always garaged, senior owner, cold A/C, modern three point seat belts, excellent mechanical shape, dr... More Info › How many miles does a 1972 Lincoln Continental Mark IV have? More Info › 1972 Lincoln Continental Mark IV 74k miles. Interior is excellent. Needs paint. Runs great. Needs new vinyl top, rust holes in roof. Body and floors are solid. | More Info › What's the power rating of a Lincoln Mark IV? Unfortunately,...
Other

How much play should a slip yoke have?

How much play should a slip yoke have? For safe and stable operation, the slip yoke and spline should maintain at least 2 inches of engagement at all times. How much does a driveshaft play cost? With the car's weight on the tires, you should be able to take the rear u-joint loose and push the driveshaft forward about 3/4 of an inch until the yoke bottoms out. Any less than that and you risk bottoming the yoke on bumps. Any more than that and there is insufficient spline engagement to transfer power. Can you shorten a driveshaft? How can...
Most popular

Where is blower motor resistor located?

Where is blower motor resistor located? It's located inside the dash, often on the opposite side of the steering wheel or inside the engine compartment on the firewall. A blower motor resistor or a blower motor control module is the part that controls the speed of the blower motor. Where is the heater resistor located? The heater blower motor resistor is located underneath the dashboard in the heater/AC compartment. The resistor enables the heater blower motor to change the speed of the fan. Where is the blower motor resistor located on a car? How much does it cost to replace...
Common questions

How long does it take for car gauge to go up?

How long does it take for car gauge to go up? Keep holding the button for about 5 seconds, then release. On Chrysler vehicles, (at least the ones I’ve had), the gauges will go up partway, halfway, then all the way, and all warning lamps will be tested. Why do car gauge needles move up and down when car starts? Sometimes funny things happen when a battery is on its way out. Perhaps you should have a load test of the battery and a check of the alternator charging system. Some newer cars feature this type of action of the...
Other

What is combination switch?

What is combination switch? The combination switch is the electronic switch assembly that controls several vehicle functions. It is most commonly used to control the turn signals, the high and low beam headlights, and wipers. It is usually mounted on the left side of the steering column, where it is easily accessible to the driver. What is 2 way switch? The 2 way switch acts as 2 switches that can control a single appliance. This is a 2 switch for a single appliance. The two-way switches are generally used for staircase case lightning and other lightning systems where we want...