When to shift from 4 wheel drive to 4HI?

However do not shift into 4lo at more than 3 mph. It is recommended that you even put the trans in neutral to shift into 4lo. Also do not drive in 4 wheel drive on dry pavement. I second the “read the manual” suggestion, if possible. You can generally shift to 4HI at any speed over 60 (not that shifting into 4wd at 60 is a good idea!

Is it OK to shift from 4Lo to 2HI?

You should be able to switch from 4lo or 4hi to 2hi at about 30 mph. I just recently sold my ’99 S-10 4X4 4.3L Automatic. It is OK to shift into 4hi at any reasonal speed or back to 2hi. However do not shift into 4lo at more than 3 mph. It is recommended that you even put the trans in neutral to shift into 4lo.

How to reset electronic switch 4×4 [ s 10 Forum ]?

Cheap way – To clear the codes and reset the computer, pull the 5 amp TCCM fuse, located at the bottom of the fuse box. Wait at least a half hour, and then replace the fuse. Turn the ignition key to run, wait for the 4×4 lights to blink, and then turn off.

Is the 4Lo button on a blazer working?

I also now notice (in testing it) that the Auto 4WD, 2HI, and 4HI buttons work, but that the 4LO button just blinks when pushed (in neutral). I have to push one of the other buttons to get out of it.

Why is my Chevy S10 GMC S15 not swapping?

I put in a 4″ frame and a 2″ body lift and put 31×10.50×15 tires on it. A 4.3 swap won’t work due to the transmission hook-ups at the bell housing on the 2.8 is smaller than the 4.3. If the 3800 engine won’t swap,then how far can I bore the cylinders out and how much cam can I put in it, to get more power to the wheels.

Is the Chevy S10 GMC s15 4 wheel drive?

The problem is that you can engage the four wheel drive, but it will not disengage back to two wheel drive. When this happened I had taken it to a mechanic and he got it back to two wheel somehow.