When did the 46RH transmission get an update?

In 1993 transmission was updated. It received the torque converter and the solenoids valve. Also, it got the opportunity to block the clutch, which improved an off-road performance. To improve the dynamic performance automatic transmission 46RE/46RH had a special mode with three speeds.

Is there a Repair Manual for a 46RH?

The legendary reliability is combined with the power and the ease of repair. Any special service work for this modification is not required. In the first version of A518 (46RH) was used a mechanical principle of lubrication. In 1993 transmission was updated. It received the torque converter and the solenoids valve.

When do you need to repair an A518 transmission?

At high power box the valve body and all-electric solenoids fail quickly and require replacement after 100,000 kilometers. It’s quite expensive to repair A518, because spare parts and the valve body have a relatively high cost. Original fluid type is MOPAR ATF+4, OEM number W0133-1969446-MPR.

Is there a larger version of the A518 46RH?

A larger version of the A518 (46RH), known as the A618 (47RH), which basically has more clutch plates for increased torque carrying capacity, was introduced in 1994 and is found behind 5.9L Cummins diesel engines and the 8.0L pickup trucks. BAND ADJUSTMENTS “ADJUSTMENT SECTION” FRONT BAND REAR BAND Tighten adjusting screw to 72 in.lbs.

Are there any problems with the 47RE transmission?

The 47RE transmission in these trucks is not a favored transmission among Cummins owners. Some of the most common problems with this transmission involve being stuck in a gear, failure of the torque converter to lock, or hard shifts.

How many turns does 42RH ( A500 ) equal?

Back off adjusting screw exactly as follows: 42RH (A500) = 4 turns. 46RH/47RH (A518/A618) = 2 turns. While holding adjusting screw, torque locking nut to 35 ft.lb. 2 STAGE GOVERNOR WEIGHT 3 STAGE GOVERNOR WEIGHT Fig. 56 Direct Clutch Pack Components

How many turns does a 42RH screw make?

BAND ADJUSTMENTS “ADJUSTMENT SECTION” FRONT BAND REAR BAND Tighten adjusting screw to 72 in.lbs. Back off adjusting screw exactly 2 turns. While holding adjusting screw, torque locking nut to 35 ft.lb. Tighten adjusting screw to 72 in.lbs. Back off adjusting screw exactly as follows: 42RH (A500) = 4 turns. 46RH/47RH (A518/A618) = 2 turns.

What kind of fluid does a jeep 46RH use?

Original fluid type is MOPAR ATF+4, OEM number W0133-1969446-MPR. ATF+4 MOPAR Chrysler Jeep Dodge Automatic Transmission Fluid 1.3 Gallons 3 Pack. MOPAR AUTOMATIC TRANSMISSION FLUID, 5 LITER ATF+4 .