How do you reset the oil light on a 2003 Hummer H2?
How do you reset the oil light on a 2003 Hummer H2?
You can also reset the Engine Oil Life System through the following ways:
- Turn the ignition to ON position without starting the engine.
- Fully press and release the accelerator pedal 3 times within five seconds.
- Turn the ignition off and start the engine to verify the indicator has been reset.
How do you reset the TPMS light on a 2006 Hummer H3?
Follow these instructions to get started:
- Turn the ignition key to the “ON” position without starting the engine.
- Turn the exterior lamp switch from AUTO to OFF 4 times within 3 seconds.
- Activate the TPMS sensor.
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire.
What type of oil does a Hummer H2 use?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
How to reset Hummer H3 change engine oil light?
How To Reset Hummer H3 Change Engine Oil Light in 4 Simple Steps! How To Reset Hummer H3 Change Engine Oil Light in 4 Simple Steps! Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)
How do you reset the oil life on a Honda Accord?
Turn ignition switch to ON position with engine off. Press and release the RESET stem in the lower center of the instrument panel until “Oil Life” message is displayed. Once the alternating “Oil Life” and “Reset” messages appears in the display, press and hold the RESET stem until several beeps sound.
How do you reset the oil life on an instrument?
Press and release the RESET stem in the lower center of the instrument panel until “Oil Life” message is displayed Once the alternating “Oil Life” and “Reset” messages appears in the display, press and hold the RESET stem until several beeps sound
