How do you reset the oil change signal?
How do you reset the oil change signal?
Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
What does the oil change light on a GMC Chevy mean?
The oil change light on your Chevy or GMC is meant to keep you on track with your vehicle’s scheduled maintenance. The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.
How to reset the change oil message on a Chevrolet?
Press and hold the “Reset” button on your information center (check mark symbol) until the “Oil Life” display changes to 100 percent. Turn your ignition to position “A” (Lock/Off). 2002 to 2006 Chevrolet Silverado. Insert your key into the ignition, and turn it to position “A” (Run/On) without cranking the engine.
Do you reset the oil light when you change the oil?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine. Turn the car’s systems on, but leave the engine off.
Why does my car turn on the oil light?
An aging pump may also cause oil pressure to drop. If the pressure dips enough from these causes, it may turn on the oil light and the circuit would require servicing. 3. Regular Oil Change. Your car’s oil should be replaced at regular intervals according to the vehicle owner’s manual.
The oil change light on your Chevy or GMC is meant to keep you on track with your vehicle’s scheduled maintenance. The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.
How to reset the oil soon light on a Chevy Silverado?
Chevy Silverado Truck Change Engine Oil Soon Light Reset Steps: 2011-2015 Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine. Turn the car’s systems on, but leave the engine off.
How do you change the oil in a Chevy?
For second generation models (2007-2013): Step 1: Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle. Step 2: Press the accelerator pedal to the floor three times within five seconds. The “CHANGE OIL SOON” light should begin to flash, which means the system is resetting.
