How do you make a scissor lift go forward?

To drive forward or backward, make sure that the platform control unit is activated, select (lift-off-drive) switch to drive position, activate and hold enable trigger switch, move controller joystick forward or backward to desired speed and direction of scissor lift travel.

Can you use an electric scissor lift outside?

Scissor lifts are well known for their safety. They’re used by businesses across the country thanks to their reach and their ability to be both used indoors and outdoors.

Can you push a scissor lift?

So as a general rule with a scissor lift, anytime you move it you should lower the lift all the way (or at least lower than 2 times the width of the base. So if your scissor lift is 4-feet wide, then the platform must be lower than 8 feet in order to move it.

Do you need a key to operate a scissor lift?

Scissor lifts use a key to start the lift and turn it off. Take your key and insert it into the ignition next to the large red button on the control panel. Turn the key to the right to turn the lift on.

How long does it take to charge a JLG scissor lift?

Recharging Instructions for all Scissor Lifts: Recharge for a minimum of 6 hours between uses. Machine cannot be charged and run at the same time.

Can scissor lifts be used on uneven ground?

The Genie® GS™-2669 RT rough terrain scissor lift is built for extra-rugged performance and is able to traverse through uneven rough terrain environments. Built to last, it’s ideal to increase operator productivity on demanding outdoor worksites.

Do I need a harness in a scissor lift?

If you’re using a vertical or scissor lift, however, it’s not always necessary to use fall protection equipment – like a harness – unless called for by exceptional circumstances.

Can you move a scissor lift while elevated?

Employers should ensure that scissor lifts are stable and will not tip over or collapse. Follow the manufacturer’s instructions for safe movement—this usually rules out moving the lift in an elevated position.

What can I do with a 2630es scissor lift?

2630ES Electric Scissor Lift 131 JLG www.jlg.com.au AppLicAtionS • Facilities maintenance • Shopping centres and other indoor areas only • Manufacturing and warehouse applications and stock-takes • Telecommunications facilities • Entertainment facilities • Electricians • Plumbers • All maintenance and construction work QUEStionS to ASK

How tall is the scissor lift at JLG?

Platform Height (max.) 7.75m 9.75m Lift Time 40 sec Lower Time 40 sec Platform Capacity Standard 230kg Dimensions:

What is the service and maintenance manual for a JLG?

Service & Maintenance Manual Models 1930ES 2030ES 2630ES 2646ES 3246ES 3121166 November 27, 2013 INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS 3121166– JLG Lift –a SECTION A. INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS A. GENERAL

What kind of power module does es scissors have?

NOTE:All machines built before mid-year 2010 are equipped with the Sevcon-1600346 Power Module, in mid-year 2010 a new design ZAPI-1001092456 Power Module was introduced for produc tion. ES Scissors built in the USA and Belgium may be equipped with either one of two different power modules after mid-2010.

Platform Height (max.) 7.75m 9.75m Lift Time 40 sec Lower Time 40 sec Platform Capacity Standard 230kg Dimensions:

How to read the JLG lift maintenance manual?

1930ES 2030ES 2630ES 2646ES 3246ES 3121166 November 27, 2013 INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS 3121166– JLG Lift –a SECTION A. INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS A. GENERAL This section contains the general safety precautions which must be observed during maintenance of the aerial platform.

How big is a scissor lift door frame?

• Smooth control, proportional drive, lift and lower • Long battery duty cycles, drive at full elevation for 18 hours • 76cm wide chassis allows drive through a standard 81cm door. 7.92m foot platform, 76cm wide • Fold-down rails allows drive through standard 203cm door.