How do I Disconnect fuel lines at the tank?
How do I Disconnect fuel lines at the tank?
To get those fuel lines apart all you have to do is push in on the metal line towards the plastic and squeeze the plastic ears then pull apart. If your lines are rusty you may have to take pliers to turn the line in the plastic fitting to break the rust loose. You will then have to get a repair section with the special gm flare.
Where do you put the fuel line on a GMC?
You put the fuel line through the slot below the fitting, push it up inside the connector to release the fitting. An auto parts store should have a GM fitting removal tool for a couple bucks. My link The factor fittings require a special tool to release.
How to disconnect the fuel line on a Mazda?
This design fuel line is used on many vehicles but Ford and Mazda loves using them. Never ever try to disconnect the fuel line by prying the connector with a screwdriver because you will damage it. With the correct tool it takes only a few seconds to disconnect the fuel line. ► Like Us on FACEBOOK: https://www.facebook.com/worldmechani…
What to do if your fuel line is leaking?
Double check it. Now pressurize the vehicle back up, so put the fuse back in the fuse panel for fuel pump, turn the key on, let it prime, maybe start the engine, check it out from underneath here with a bright flashlight. No leaks … You’re good to go.
To get those fuel lines apart all you have to do is push in on the metal line towards the plastic and squeeze the plastic ears then pull apart. If your lines are rusty you may have to take pliers to turn the line in the plastic fitting to break the rust loose. You will then have to get a repair section with the special gm flare.
You put the fuel line through the slot below the fitting, push it up inside the connector to release the fitting. An auto parts store should have a GM fitting removal tool for a couple bucks. My link The factor fittings require a special tool to release.
This design fuel line is used on many vehicles but Ford and Mazda loves using them. Never ever try to disconnect the fuel line by prying the connector with a screwdriver because you will damage it. With the correct tool it takes only a few seconds to disconnect the fuel line. ► Like Us on FACEBOOK: https://www.facebook.com/worldmechani…
Double check it. Now pressurize the vehicle back up, so put the fuse back in the fuse panel for fuel pump, turn the key on, let it prime, maybe start the engine, check it out from underneath here with a bright flashlight. No leaks … You’re good to go.
What to do when your fuel line is bleeding air?
Open the bleed plug on the filter closest to the fuel tank. 6. Open fuel supply valve so that the fuel is available to the filter and pump. 7. Most all equipment has a hand priming pump lever to pump fuel through the system and replace trapped air. (Check operator’s manual.) Pump several times until full
How do you re pressurize a fuel line?
Re-pressurize the fuel system by shutting the valve and turning the ignition to the “on” position (the position just before the crank position where you attempt to start the vehicle). You will hear the fuel pump prime the system.
Where does the fuel line go in a car?
The fuel line carries the fuel from the fuel tank to the fuel injection system in your vehicle. Fuel lines are under high pressure. Whenever you work on them, you’ll need to relieve that pressure using something called a Schraeder valve, which is located on the fuel rail in most vehicles.
