How can I get my rear lights to turn off?

Very easy to install.. push down the brake pedal and you will the hole.. take the stopper and pop into the hole until it pops.. and do the same for the cruise control switch. And then you are all done.. Then no more problems with lights not turning off. Thank you! I pressed the brake circuitry plug all the way in and they turned off.

Why do my brake lights stay on when the car is off?

I would look for a switch hanging. If the problem is brake lights check the brake light switch usually by the brake pedal. If not get a repair manual from Auto Zone or someplace like that with a good electrical diagram in it and trace put the circuit that’s staying on.

When do the lights stay on in a car?

Running lights and tail lights stay on when the engine is… After I stop the car, turn off the key and park, my headlights and rear lights stay on. I know a little about cars, so I removed the fuse in order to not drain the battery until I know what to do.

Why do my tail lights stay on even after I Turn Off the car?

Thank Kevin. If the tail lights are illuminated even after you have used the on-off switch to command them off, that means the switch supplying power is fused shut and/or the circuit is being powered when it is not supposed to be due to a wiring fault.

Why do my blinkers stop blinking when I apply the brake?

All of these problems mentioned can be the result of a bad ground. When you operate both blinkers and brake lights and the blinkers stop blinking, it’s because the circuit is not good enough to operate both lights. Bad ground. Same with headlights and blinkers. Probably the same with fog lights.

When does the blinker go on or off?

All 4 turn indicaters, examined from outside, blink correctly when the hazard button is depressed/released and when the turn indicator is positioned left/right/off. The problem is that a clicking (high speed) is heard when the hazard indicator is released and the turn indicator is positioned off.

Why does my left turn light bulb not blink?

Both turn light bulbs on the left, or both turn light bulbs on the right, do not blink This is a common failure condition of the turn signal switch itself. A YourMechanic professional should inspect this condition and replace the turn signal switch if necessary.

Is there a turn signal indicator that does not blink?

Turn signal indicator in the instrument cluster comes on solid and does not blink 2. Turn signal indicator blinks very fast 3. Both turn light bulbs on the left, or both turn light bulbs on the right, do not blink 4. Both right and left turn indicators do not work properly

Why do my rear lights stay on when the car is off?

You see when the brake is in the depressed mode the light comes on (as it should) but when not pressed it sort of sits on small bit of rubber the size of a pea. Look at the pedal arm itself – about 4 or 5 inces up the arm you will see a small hole where a rubber used to be (if light stays on means it has fallen off).

Why do my tail lights keep coming on?

The most common is the tail light sockets. They often melt the housing they fit into and consequently lose ground. The only way to properly fix this is by replacing the entire taillight assembly” italic text”.

Why do my brake lights stay on even after the car is off?

If the brake lights are not functioning, it is possible the filaments in both bulbs are burned out and that possibility should be ruled out first. If the bulbs are OK, the brake light switch and the rest of the circuit will have to be traced.

Why do the lights stay on after ignition is off?

If you leave the lights in the on position, they stay on and the car chimes when you open the door. If you break down you might want the lights on, if you are trying to jump start the car in the dark you will need the lights on… Me too – in 36 years of Ford ownership – it’s normal for at least the sidelights to stay on