Most popular

Where is the fuel pump on a DT-466?

Where is the fuel pump on a DT-466?

JaymZH2 wrote: fuel pump would be my guess. not sure on the older ones, but the newer DT’s it is on the drivers side mid block towards the front. a couple bolts a 2 lines and your done. I have a 2000 4700 DT-466, would what you call the fuel pump be the same thing they call the “high pressure pump” in the book that the lines from the filter go to??

Why does my truck engine not start when I replace the ECM?

NOTE: A new ECM comes with an unprogrammed Personality Module in it. If the ECM has been replaced, the ECM WILL NOT COMMUNICATE and the ENGINE WILL NOT START until the integral Personality Module has had software flashed into it. 4.

Why does my dt466e no start-fuel problem?

Got that all fixed. Realized that my primer pump would leak when I would pump it, replaced the entire assembly. Filled both filters, truck fired on the first try. Now today go to run a call, cranks and cranks wont start. Gave a shot of ether, fires but wont run on diesel.

Why did my cat 3126 not start up?

The next 3126 did not have the steel oil line to the injector.And also check the return fuel fitting in the rear of the head for metal in it.I have seen metal in them when the engine ran out of fuel and I guess if it was restricted it would not bleed the fuel system. Click to expand…

What kind of engine does a cat 3126 have?

I have a 3126 in a 2004 Ford that was running fine when I parked it. Tried to start it after is sat for a couple of weeks. The engine cranks like it should but makes no signs of starting.

Is there any warranty on Cat 3126 cranks?

The diagrams I have seen don’t look exactly like my configuration. No warranty! Any thoughts?

How to count the flashes on Cat 3126?

Count the flashes, they will be two digit numbers, eg. 6 flashes then a pause then 3 flashes would be code 63. there may be several codes, it will flash them all one after another. You usually need to go through this process several times to make sure your getting the codes correct.

Which is fuel injection system does DT 76L 6 use?

INTERNATIONAL DT FUEL SYSTEM DIAGRAM navistar dt 76l 6 diesel cylinder prefix stroke bore continued 1 Today I will talk a little about diesel engine fuel system problem schematic diagram of the high pressure common rail fuel injection system.

What kind of car is the DT 466?

Can’t seem to figure this one out myself, so I figured I’d try here. 2003 International 4300 with the 466, and have been having some issues. Used to start and run beautiful, probably the best running dt I’ve driven.

Can’t seem to figure this one out myself, so I figured I’d try here. 2003 International 4300 with the 466, and have been having some issues. Used to start and run beautiful, probably the best running dt I’ve driven.

JaymZH2 wrote: fuel pump would be my guess. not sure on the older ones, but the newer DT’s it is on the drivers side mid block towards the front. a couple bolts a 2 lines and your done. I have a 2000 4700 DT-466, would what you call the fuel pump be the same thing they call the “high pressure pump” in the book that the lines from the filter go to??

Got that all fixed. Realized that my primer pump would leak when I would pump it, replaced the entire assembly. Filled both filters, truck fired on the first try. Now today go to run a call, cranks and cranks wont start. Gave a shot of ether, fires but wont run on diesel.

What kind of engine does an International 4700 have?

We have a 2000 International 4700 with a DT466E Engine. The engine is new, the injectors are all new, the MAP Sensor is new, the Baro Sensor is new, the Cam Sensor is new, the High Pressure Oil Pump is new, the fuel sensor and regulators are new, the computer is new.

Author Image
Ruth Doyle