What to do if your GM airbag light is on?

If your dealer will not cover the repair, contact the GM customer service center. 1. Disable the airbag system. 2. Replace connectors on both driver and passenger seats. Then reroute and attach the harnesses to the seat using the service kit. 2. Disconnect connector C308 from driver’s seat cross-beam. 3. Remove the driver’s seat.

What happens if you ignore the seat side impact air bag light?

When that happens, the seat side impact air bag is fully functional. However, if you ignore the warning light, over time the resistance can increase to a level where the seat side impact air bag may not deploy in a side impact crash. Dealers will replace the front seat-mounted side impact airbag terminals and connector body.

How to turn on the seat airbag light?

Install the blue seals on the body harness and the white seals on the seat airbag harness. Strip the insulation off all four leads 5 mm (3/16 in). Align the seals with the wire insulation. 7. On the body harness, position two FEMALE terminals onto the wires.

Can a GM airbag be replaced for free?

GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)

What does it mean when SRS airbag light comes on?

Therefore, when you see the service airbag message pop up, you should immediately get it fixed. What you might also experience with the service airbag message popping up is your SRS airbag light turning on. This may occur if your car was previously involved in an accident that resulted in the crash sensors’ activation without the airbags deploying.

What does service airbag mean on your car?

However, when it comes to smaller things like the service airbags alert, not many people know what exactly to do with them. However, they serve a vital role and should be on the list of things to know about your car. So what exactly does service airbag mean? Let me fill you in.

Where are the air bag connectors on a GMC Acadia?

The airbag connectors on some 2008 Buick Enclave, GMC Acadia, and Saturn OUTLOOK vehicles, and 2010 Chevrolet Malibu and Pontiac G6 vehicles may wear, leading to corrosion in the connector terminal pins at the connection between the body main wiring harness and the front driver and passenger side impact air bag.

Can a side impact air bag not deploy?

However, if you ignore the warning light, over time the resistance can increase to a level where the seat side impact air bag may not deploy in a side impact crash. Dealers will replace the front seat-mounted side impact airbag terminals and connector body. If your dealer will not cover the repair, contact the GM customer service center. 1.

What does service air bag message mean?

The service air bag message is the indicator that the system has detected a fault in the air bag system and is there to inform you that you need to get that issue repaired to restore the air bag system to proper operating condition. There is no way to tell without getting the airbag system scanned to know what that issue it.

How do you reset service air bag light?

Put the key into the ignition and turn the switch to the “on” position. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.

How do you reset airbag light?

Step 1 Turn on the ignition switch with your car key. Wait for the airbag warning light to turn off. Turn the ignition switch of your car back off for a little longer than three seconds. Repeat steps 1 through 3 twice to make three times total. Turn your ignition switch back on to fully reset the airbag light.

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

Do you need scanner to read airbag trouble codes?

Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.

Is the service airbag light on on a Chevy Silverado?

I have a 2003 Silverado and the airbag light is on and service airbag on the dash stays on. Can you help? If so would it Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

What causes the air bag light to come on?

The wear and corrosion changes the resistance value and that results in an Airbag light on or a service air bag message on the Driver Information Center (DIC). When that happens, the seat side impact air bag is fully functional.

Do you need to reset the airbag on a Avalanche?

Do not drive the Avalanche if you see this light because the airbag could accidentally deploy while you are driving or possibly not deploy when you need it during an accident. You need an automotive scan tool, called an OBD scan tool, to reset the computer and shut off the SRS light. This tool can be obtained from any auto parts retailer.

What is the SRS light on an avalanche?

The airbag light, called an SRS or Supplemental Restraint System light, illuminates when there is a malfunction with the vehicle’s airbag system. Do not drive the Avalanche if you see this light because the airbag could accidentally deploy while you are driving or possibly not deploy when you need it during an accident.

Why does my GM airbag light come on?

The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear. GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)

How do I Turn Off the airbag light?

1. Disable the airbag system. 2. Replace connectors on both driver and passenger seats. Then reroute and attach the harnesses to the seat using the service kit. 2. Disconnect connector C308 from driver’s seat cross-beam. 3. Remove the driver’s seat. 4.

GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)

Why does the service air bag light come on?

Then the DIC message would come on saying Service Air Bag. However this would go away the next time I started the truck and then would come back randomly. I took it to the dealer and they checked it out and said they found no problem with the airbag, and chalked it up to a computer glitch.

When does the GM airbag light come on?

The airbag light, or SRS (supplemental restraint system) light, on the GM dashboard shines whenever there is a malfunction with the airbag deployment system. The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag.

How can I reset the airbag light on my car?

The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag. This light is controlled by a computer and can be shut off using a computerized scan tool that can be purchased from your local auto parts retailer. The parts retailer may let you borrow the scan tool for free to reset your airbag light. Step 1

What does it mean when your airbag light is on?

It can even get detached altogether. To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning.

What should I use to keep my airbag light on?

Wrap Woven Polyester Electrical Tape (PET) (preferred) or equivalent anti-abrasion tape or electrical tape around the two exposed wires on the seat harness for a length of 30 mm (1.2 in) from the back of the connector. Continue to wrap the tape around the back of the connector. 15. Slide the conduit back up.

What to do when SRS airbag light turns on?

You have a few ways you can go about handling both the service airbag message and SRS airbag light turning on. First, you can go to the dealer to buy a brand new SRS airbag module. If you are well versed in automotive repair, you also have the option of resetting the unit yourself.

Is it safe to drive with the air bag light on?

It could be a problem in the sensor that causes the light to come on. Or, the problem could be that your airbags will not deploy if you end up in a collision. It is not recommended you take the chance.

What was the GMC Sierra 1500 air bag light on?

Tl an independent mechanic called on behalf of the owner of a 2012 GMC Sierra 1500. While driving 30 mph, the front and rear driver side curtain air bags deployed on their own and the air bag warning indicator was illuminated. There were no injuries. The vehicle was taken to an auto body shop to have the air bags repaired.

What is the trouble code for GM airbags?

GM has issued a service bulletin to address an airbag light on condition along with the following trouble codes: B0012, B0013, B0015, B0016, B0019, B0020, B0022, B0023, B0026, B0033, B0040, B0042 or B0044 on the vehicles listed below. 2006-2014 Chevrolet Corvette, Impala, Malibu Models (includes Malibu Classic)

What to do if your GM airbag light is on?