What do I need for a 1999 Chevy S10 4×4?

Thanks but I’m looking for the complete vacuum schematic. Including everything associated with the 4WD system: front axle actuator, 2Hi-4Hi-4Lo transfer case switching, transmission vacuum modulator, etc. In case it did not come through in the original request, vehicle is a 99 Chevy S10 4×4 with ZR2 package.

What kind of engine does the Chevy S-10 Blazer have?

The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.

What are the dimensions of a 1999 Chevy Blazer?

Overall Length: 176.8 ” Overall Width: 67.8 ” Rear Head Room: 38.3 ” Rear Leg Room: 35.6 ” Wheelbase: 100.5 ” Displacement: 262 cu.in. Engine liters: 4.3 Fuel tank capacity: 19.0gal. Diameter: 15.0″ Curb weight: 3,536 lbs. Gross vehicle weight: 4,450 lbs. Max cargo capacity: 67 cu.ft. Payload: 950 lbs.

What’s the problem with my Chevy S10 4.3?

I have this same problem with my 99 s10 4.3. the code reader says miss fire cylinder #2… so I replaced wires, plugs, distributer cap and rotor. after 2 days this problem got worse. again I read the codes and it read the same code, cylinder #2. good old GM I guess 71 people found this helpful.

Can a 1996 Blazer be used in a Chevy S10?

Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well. The 2003 Sonoma also has hardware that fits the S10 pickup.

What kind of engine is in a Chevy S10?

Because the Chevy S10 has practical hardware, you can use components that are designed for other automobiles to power an S10 truck. Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well. The 2003 Sonoma also has hardware that fits the S10 pickup.

How many liters does a 1997 Chevy S10 have?

In 1997, Chevy S10 vehicles had different hardware, so the hardware options built for gasoline components distributed less fluid. As a result, a typical product for a 1997 Chevrolet truck will have 2.2-liter hardware. Because the liters are reduced, some products for a 1997 Chevy pickup may be built with four cylinders.

What was the misfiring code on my 1999 Chevy S-10?

First we replaced the plugs that were the wrong ones. With the computer conected we monitored the live data and were recordeing most of the misfires in cylinder 6, 4, 2 with an occational misfire on 5. We had no codes recorded in the ECM but the fuel trims were way off.

What kind of transmission does a S10 4×4 have?

Including everything associated with the 4WD system: front axle actuator, 2Hi-4Hi-4Lo transfer case switching, transmission vacuum modulator, etc. In case it did not come through in the original request, vehicle is a 99 Chevy S10 4×4 with ZR2 package.

How to check for vacuum in Chevy S10 4×4?

The vacuum actuator the pulls a shift cable that engages the front axles. So what I suggest that you check, with the truck running. Pull the vacuum connector offf of the transfer case vacuum switch and check for vacuum there. Only one of the lines should have vacuum on it when you disconnect it.

Where is the 4WD switch on a Chevy S10?

One is the 4WD vacuum switch, located on top of the transfer case, and the vacuum actuator, I cannot obtain a diagram of that, but it is a simple vacuum circuit.

What kind of vacuum hose do I need for a 2001 S10?

2001 Chevy S10 4×4 ZR2 need vacuum hose diagram or picture… 2003 S10, 4 dr. cab, 4.3. 4WD doesn’t engage. Good vacuum to

One is the 4WD vacuum switch, located on top of the transfer case, and the vacuum actuator, I cannot obtain a diagram of that, but it is a simple vacuum circuit.

2001 Chevy S10 4×4 ZR2 need vacuum hose diagram or picture… 2003 S10, 4 dr. cab, 4.3. 4WD doesn’t engage. Good vacuum to

How long does it take to replace front axle on S-10 Blazer?

Thankfully, replacing the front axle is fairly straightforward. You will need to raise the S-10 Blazer with a jack in order to access the axle. It should only take between one to two hours to replace the front axle, depending on your experience level.

Where does the Chevrolet S-10 Blazer come from?

The Brazilian variant, based on the second-generation S-series, continues in production in Brazil with their own sheetmetal stampings as well as in Canada with the Brazilian, Indonesian and Russian sheetmetal stampings).

When was the last year a blazer had 4 wheel drive?

It was available with the 4.3 L V6 engine only, and most models featured four-wheel drive via an electronic transfer case; 1997 was the last year a manual transfer case for 4 wheel drive (floor shifter for 4 wheel drive) was offered. In 1998, the interior and exterior received some cosmetic changes.