What are the DTC codes for Ford Focus?

P0122 – Throttle Position (TP) Circuit Low Input The TP sensor circuit is monitored by the PCM for a low TP rotation angle (or voltage) input through the comprehensive component monitor (CCM). If during key ON engine OFF or key ON engine running the TP rotation angle (or voltage) changes below a minimum calibrated limit, the test fails.

What does the P1000 code on a Ford car mean?

The P1000 code does not indicate a malfunction, but indicates a self-tuning EOBD. The combination 1000 appears after the calibration of the control unit, which led to zeroing the memory. The code should be deleted automatically. P0001 Malfunction of the fuel supply control system.

Where is the DTC code on the dash?

And any other DTC code that appears on the dash is going to correspond to the second column of the data below, any other codes aren’t displayed on the dash, you’ll need a readout device to get them. The table formatting is all messed up, but you should get the idea, the titles should be in 3 columns.

What is the fault code on a Ford Explorer?

P1293, P1294 According to the official description, such a system code on Ford Explorer, Maverick or Mondeo III translates as opening the second group on the high pressure side. The first thing to do on a Ford car with a Hydronic box or any other is to check the elements of the ignition system.

Why do I keep getting DTC codes on my car?

Like Clive says, these codes can be caused by some little glitch, and may not mean anything. A generic OBD scanner may not pick them up, they are probably local to the Instrument Cluster. To read them, and to clear them may need a Ford specific system like the official Ford IDS, or Forscan.

What is the diagnostic code for a Ford?

Select Your Ford’s Diagnostic Trouble Code. Body Codes. B103B. B103C. B103D. B1111. B1113. B111B. B111C.

What do DTC codes in test menu mean?

3- the codes mean nothing, usually just random data produced on starting the car and safe to remove, tbh codes generated from a cluster check rarely mean much. If there was anything of any concern then the obd scanner would detect it. Stoney87 1 – thanks for that.

What does DTC p0602 mean on Ford Focus?

The other big error is: DTC P0602, “Engine Control Module (ECM) Programming Error,” But this could easily be caused by low battery voltage. So it looks like flat or internal intermittent fault in the battery, or a bad connection in the battery wiring. First thing to check is the heavy wiring from the battery to the body & to the engine.

Can a forscan read a Ford Focus code?

Forscan can not only read all the codes, it can read & log the sensor output values while the engine is operating. That may be the only way to track down the error, and separate cause from effect. The DTCs are a vital guide, but they do not always point out the fault directly. Please let us know what you find.

What is the DTC code for a 2001 focuslx?

2001 PO460 fault? Hi, I have a 2001 FocusLX with the 2.0 split port. I just got the PO460 code which says fuel level sensors. but the gas guage seems to be working fine. I have no symptoms other than the CEL being lit and a lot of engine noise.

What is the hidden menu on Ford Focus Mk3?

Diagnostic hidden menu in Ford Focus MK3 lets you perform various tests: needle sweep, LCD segments, indicators, sound chimes. You can read DTC error codes and view engine live data like speed, RPMs, battery voltage, coolant temperature, fuel level and fuel flow.

What are the DTC codes for OBD II?

There are two categories of DTC’s that apply to OBD II. They are listed below with Type A being the more severe. 1. Emissions related. 2. Requests illumination of the MIL after one failed driving cycle. 3. Stores a freeze frame DTC after one failed driving cycle.

What’s the maximum DTC for a p0118 focus?

P0118 – Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50°C (-58°F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC.

What should coolant temp be in Ford Focus?

Engine coolant temperature exceeds a calibrated value, typically 225F (107C). The Fuel, Heated Oxygen Sensor, Catalyst and Misfire monitors have not completed. Calibrated timer to set DTC P0116 has expired. Ensure IAT and engine coolant temperature are similar when engine is cold.

What is the code for ho2s sensor malfunction?

P0135 – HO2S Sensor Circuit Malfunction (HO2S-11) During testing the HO2S Heaters are checked for opens/shorts and excessive current draw. The test fails when current draw exceeds a calibrated limit and/or an open or short is detected. Short to VPWR in harness or HO2S. Water in harness connector. Open VPWR circuit. Open GND circuit.

What does low input mean on the p0112 circuit?

P0112 – Intake Air Temperature (IAT) Circuit Low Input Indicates the sensor signal is less than Self-Test minimum. The IAT sensor minimum is 0.2 volts or 121°C (250°F). Grounded circuit in harness

Where can I find the Koer diagnostic trouble code?

Access KOER diagnostic trouble codes on scan tool. P0122 – Throttle Position (TP) Circuit Low Input The TP sensor circuit is monitored by the PCM for a low TP rotation angle (or voltage) input through the comprehensive component monitor (CCM).

What are the DTC codes for Ford Focus?