What are the dimensions of a 1986 Toyota Tercel?
What are the dimensions of a 1986 Toyota Tercel?
Standard wheel sizes on the Toyota Tercel spans from 13×5 inches. Dimensions for the 1986 Toyota Tercel are dependent on which body type is chosen. The maximum width and height is 1615mm x 1510mm and can vary on the basis of model.
What kind of car is a Toyota Tercel?
Toyota tercel wagon 4×4 deluxe original rust free california car like new! No reserve !!!! tercel toyota 35 mpg auto cold ac new tires !!!!!
When did Toyota stop making the Tercel wagon?
The Tercel wagon (and four-door sedan in Japan) continued with the same design until February 1988 (when the Sprinter Carib was replaced by a larger, Corolla-based design), while the sedans and hatchbacks moved on to the newer design. Versions available in Europe:
What’s the final drive ratio of a Toyota Tercel?
The EL gear generates a 17.6:1 final drive ratio, giving the driver the torque needed to extract the vehicle from conditions which otherwise may have trapped it. It is only available when in four-wheel drive, and because of its low gear-ratio it is suitable only for very low-speed use.
Toyota tercel wagon 4×4 deluxe original rust free california car like new! No reserve !!!! tercel toyota 35 mpg auto cold ac new tires !!!!!
How big is the gas tank on a Toyota Tercel?
Length: 159 inches. Wheelbase: 94 inches. Height: 54.5 inches (59, wagon). Width: 64”. Weight: 1,990 – 2,140. Horsepower: 60-62 depending on year. Gas tank: 12 gallons hatchbacks, 13 gallons wagon. Cargo volume: 29 cubic feet (hatchbacks), 60 cubic feet (wagon). Third generation: 1987-1990
How tall can you get in a Tercel wagon?
The Tercel wagon provided a surprising amount of space, and could accommodate six foot tall passengers with ease, along with their luggage. Gear ratios were changed in 1985, and the interior was upgraded in 1986, but otherwise the wagon continued as it was through 1988.
What was the compression ratio of a Toyota Tercel?
The compression ratio was 9.0:1; it used two-barrel carburetion with a secondary system for better economy. The engine was small but had five main bearings for reliability and long duty. The cam was belt-driven. Cylinders were “siamesed,” sharing a solid cylinder wall with the next, to reduce space and weight.