How to replace front brake pads on a 1997 Chevy k1500?

This video will guide you step by step on how to replace your front brake pads and rotors on a 1997 Chevy K1500 4×4 truck. List of tools needed… List of parts needed… – Front brake pad kit. (Don’t get the cheap ones) – Brake rotors. (Only if they are needed. Watch video to see why.)

Do you apply parking brake when replacing rear rotors?

If you’re replacing rear rotors and not the front, the procedure is the same except to place the wheel chock in front of one of the front tires instead and do not apply the parking brake. Jody L. Campbell spent over 15 years as both a manager and an under-car specialist in the automotive repair industry.

How to remove brake rotors from a Chevy Avalanche?

How to Remove Brake Rotors From a Chevy Avalanche. 1 Step 1. Park the Avalanche on a level paved or concrete surface. Release the hood latch. Apply the parking brake. Place the wheel chock behind one 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

What to do if your Chevy brake pads are making noise?

A brake pad that is semi-metallic will be noisier than a non-asbestos or ceramic pad. You should put new pads on your Chevy and replace or repair the rotors. You could add shims, use a brake noise aerosol, or brake grease to the backs of the pads to dampen the noise. Brake Chatter: Warped or improperly finished rotors will cause this noise.

What kind of brakes does a 1997 Chevy pickup have?

The 1997 Chevy pickup is available in 2-wheel or 4-wheel drive, and both come with disc brakes. Changing disc brakes is a quick and simple process. If you hear a squealing or grinding sound when you apply the brakes or drive, it’s time to change the brakes. Loosen all of the lugs with the tire iron 1½ rotations.

How do you know if your Chevy has a brake problem?

You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.

What’s the first step in disassembling a Chevy?

The first step is to suspend the chassis and let the rear extend freely under the car. Use the properly rated floor jack to jack up the car and place the correct jackstands under the frame rails. Remove the lug nuts and take off the rear wheels. The shocks are fully extended and can be unbolted.

How do you remove the rear wheels on a Chevy?

Remove the rear wheels using the ½-inch air gun. Remove the driveshaft using an 11mm wrench on late-model vehicles, or a 7/16 wrench on early-model vehicles. Remove the nuts on the U-clamps. If the driveshaft wants to turn while the nuts are being removed, stick a common screwdriver between the universal to limit its movement.

Can a Chevy 10 bolt differential be disassembled?

The disassembly procedure for both Chevy 10- and 12-bolt rear differentials is virtually the same. You do not need to be concerned with getting it out of alignment.

What kind of brake system does Chevy Silverado have?

The Chevrolet Performance front brake system features Brembo ® six-piston, fixed aluminum calipers and larger-than-stock Duralife™ rotors for an 84% increase in brake pad area and a 42% increase in rotor area to increase thermal capacity. The Duralife™ hardened rotor surface helps reduce corrosion and provide quieter braking with less vibration.

How much does it cost to replace a brake rotor on a Chevy Silverado?

Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Chevrolet Silverado 1500 Brake Rotors/Discs Replacement costs $404 on average. What is the Brake Rotor/Disc all about?

What kind of brakes does a c1500 have?

Brake Hoses Brake Lines Caliper Parts Drums & Hardware Master Cylinders & Parts Pads & Shoes Parking Brake Cables Sensors & Switches Trailer Brakes Wheel Cylinders & Parts Other Placement on Vehicle see all Front Rear Left Right Brand see all ACDelco Brembo Centric Parts Detroit Axle Power Stop R1 Concepts Raybestos StopTech Rotor Style see all

When did the C / K Chevy truck come out?

The C/K was Chevrolet and GMC’s full-size pickup truck line from 1960 until 1999 in the United States, from 1965 to 1999 in Canada, from 1964 through 2001 in Brazil, from 1975 to 1982 in Chile.

How to bleed the rear brakes on a C / K 1500?

Once you are certain of a firm pedal, drive the vehicle at more than three miles per hour so the controller can automatically reset the system. Stop the vehicle afterward and bleed the rear brakes. Scan Tool Attach a pressure bleeder to the master cylinder reservoir and turn the ignition key to the On position.

Can a Silverado 1500 Bleed the ABS brake?

2000 chevy silverado 1500 4×4 redone all new lines got done started bleeding with truck off get pedal turn truck on pedal goes away bleed brakes with truck on still nothing any answers for this happening 40 people found this helpful. 10 people found this helpful.

How many book hours would it take to replace a Chevy?

The Chevy 2500 express van with a 5.3 is rated at 17.5 hrs to R@R an engine. 13 hrs for a Chevy 1500 4wd R@R. Take time for cleanup and preparation and that’s all there is to it other than to do it. The long block version of this vehicle, the 2500 (I believe), is 17.5 hours.

How do you change a cv shaft on a Silverado?

Step 4. Use a long pry bar between the wheel studs to keep the hub from moving as you remove the bolts from the inside half of the CV shaft. Step 5. At some point you’ll need to remove the stabilizer link for clearance.

How do you remove transmission from a 4L60E?

Use a thin pry bar to loosen the transmission from the engine, since it will frequently be stuck to the mounting dowels. Once the transmission is loose from the engine, remove all the remaining bolts, then lower the transmission.

How do you remove a heater from a Chevy truck?

Use a socket wrench to do this. Afterward, haul out the modular duct from within of the glove compartment. Step 4: Now, remove the heater hoses. Plug them with a handful of rags. Step 5: Haul out the heater core mounting bolts using a socket wrench. Then, extract the heater core from your Chevy truck.

How do you remove a transmission from a Chevy truck?

You will need to slide it backward about 7 inches (17.8 cm) to clear the torque converter. Lower the transmission to the floor, and slide it out from underneath the truck, keeping it as level as possible and in an upright position.

How do you replace the evaporator core on a Chevy truck?

Steps Step 1: Remove the battery cable from the battery terminal. Step 2: Completely drain out the coolant liquid inside the pan by opening the release valve. Step 3: Extract the mounting bolts from the modular duct. Step 4: Now, remove the heater hoses. Step 5: Haul out the heater core mounting bolts using a socket wrench.