Most popular

How do you remove fuel lines from a Volvo?

How do you remove fuel lines from a Volvo?

To remove the fuel lines you need to push in these two clips as seen in the next photo (one is red and other is black) and pull out the fuel lines. Make sure you have some sort of cloth or kitchen towels handy, as there will be a tiny bit of fuel spillage when disconnecting the fuel lines.

How do you disconnect fuel tank sender in a Volvo?

Then disconnect filler hose: To remove the Volvo quick disconnect fitting on the fuel outlet line (the 90-degree fitting below), grip the outer sleeve, and push that outer plastic cylindrical sleeve towards the top of the fuel tank send unit. Keeping the sleeve pushed “forward”, push the entire fitting towards the top of the tank.

What to do when you disconnect a fuel line?

Have a fire extinguisher on hand, and work in a well-ventilated area away from anything that could have a flame or a spark. Anytime you disconnect a fuel line that is a compression or press quick-release type fitting, you want to make sure that you depressurize the fuel system.

When to replace the fuel pump on a Volvo S40?

Here is a simple DIY guide on how to replace the fuel pump on Volvo S40 and V40 from 1996 to 2004. The fuel pump sender unit might look different on the Phase 1 cars (1996-2000). The 1.9D, 1.9TD and 1.8 GDI S40 and V40 don’t have the pump in the sender unit and instead use the high pressure pumps in the engine compartment.

Then disconnect filler hose: To remove the Volvo quick disconnect fitting on the fuel outlet line (the 90-degree fitting below), grip the outer sleeve, and push that outer plastic cylindrical sleeve towards the top of the fuel tank send unit. Keeping the sleeve pushed “forward”, push the entire fitting towards the top of the tank.

What’s the best way to disconnect a fuel line?

We will demonstrate how to disconnect fuel line and what tools to use. This design fuel line is used on many vehicles but Ford and Mazda loves using them. Never ever try to disconnect the fuel line by prying the connector with a screwdriver because you will damage it. With the correct tool it takes only a few seconds to disconnect the fuel line.

How do you replace a fuel pump in a Volvo?

Put five more hose clamps onto the short section of new fuel injection hose, before sliding into it the brass splice tube. Then, slide the brass splice into one end of the fuel hose (that runs towards the engine) and also into the short length of fuel hose, that runs to the 90 degree brass elbow.

What kind of clamps do I need for a Volvo fuel tank pump?

The large clamp holding the fill hose is Volvo p/n 943477-0; buy two of these. The smaller clamps are 943471-3; buy four of these. The spring clamps are 1321719-5; buy one of these unless you want to replace it with a screw clamp (recommended).

Author Image
Ruth Doyle