Are all 302 water pumps the same?
Are all 302 water pumps the same?
No they’re not. I think it was ~’70 when the 302 switched to a drivers side outlet. Also even the ’65~’68 289’s had different waterpumps as some had a plate on the back and others didn’t. You also need to match the pump to the timing cover as the water passage holes faced differently.
How does a reverse rotation water pump work?
A REVERSE rotation pump rotates the opposite direction of the crankshaft. Water pump pulleys running on the INSIDE surface of the belt indicate a STANDARD ROTATION water pump. Water pump pulleys running on the OUTSIDE surface of the belt indicate a REVERSE ROTATION water pump.
Which way should a water pump turn?
Rotation is indicated on the head of the pump, you’ll see an arrow going counter-clockwise. This is the direction you want the pump spinning. If you turn the motor around and look at the backside and remove the cap, you’ll see a shaft located in the center.
How do I know if I have a reverse flow water pump?
Water pump pulleys running on the inside surface of the belt indicate a Standard Rotation water pump (grooved side of belt). Water pump pulleys running on the outside surface of the belt indicate a Reverse Rotation water pump (flat or smooth side of belt).
What kind of water pump does a Ford have?
Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Water Pump, Mechanical, Aluminum, High Volume, Ford, Mercury, 289, 302, 351W, Passenger Side Inlet, Each Water Pump, Mechanical, High-Volume, Aluminum, Natural, Ford, 1970-1978, 302/351W, Driver Side Inlet, Each
What kind of water pump does a Boss 302 have?
Beginning in 1970, 302 and 351W small-block Fords received a new water pump casting (D0AZ-8501-C) with the inlet on the left-hand side of the engine. Boss 302s for 1969 were fitted with a 1969- specific high-flow water pump (C9ZZ- 8501-A).
What kind of water pump does a Ford 351C have?
This is a right-hand inlet water pump, which is 1962–1969 only. Beginning in 1970, Ford went to a left-hand inlet water pump along with a 4-bolt crankshaft pulley and harmonic balancer on smallblock Fords. Like the 302 and 351W in 1970, the 351C also received a left-hand inlet water pump.
What kind of water pump does a 1966 Ford small block use?
Although 1966+ small-block Fords received cast-iron water pumps originally, replacement units tend to be cast aluminum, which, due to improved casting technique, are better and lighter than iron. This is a right-hand inlet water pump, which is 1962–1969 only.
Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Water Pump, Mechanical, Aluminum, High Volume, Ford, Mercury, 289, 302, 351W, Passenger Side Inlet, Each Water Pump, Mechanical, High-Volume, Aluminum, Natural, Ford, 1970-1978, 302/351W, Driver Side Inlet, Each
Beginning in 1970, 302 and 351W small-block Fords received a new water pump casting (D0AZ-8501-C) with the inlet on the left-hand side of the engine. Boss 302s for 1969 were fitted with a 1969- specific high-flow water pump (C9ZZ- 8501-A).
This is a right-hand inlet water pump, which is 1962–1969 only. Beginning in 1970, Ford went to a left-hand inlet water pump along with a 4-bolt crankshaft pulley and harmonic balancer on smallblock Fords. Like the 302 and 351W in 1970, the 351C also received a left-hand inlet water pump.
Although 1966+ small-block Fords received cast-iron water pumps originally, replacement units tend to be cast aluminum, which, due to improved casting technique, are better and lighter than iron. This is a right-hand inlet water pump, which is 1962–1969 only.
