Why does my club car go forward but not reverse?
Why does my club car go forward but not reverse?
If the not moving issue changes direction (Will run in reverse, but not forward) the switch has gone bad and need to be replaced. It is usually that simple. The best case scenario is that you only need to replace the Forward-Reverse F&R switch. You can find a replacement F&R switch for 48 volt carts here.
Why is there no reverse on my golf cart?
Cut repair costs, not quality. @gerryr, this could be as simple as the reverse switch being the problem. It is a mechanical contact and could be not making the connection. You can check that by switching the wires from the forward/reverse switch and see if you now have only reverse. If so, you know it’s the switch.
Why is the reverse gear not working on my 4L60E?
Valve Body Issues- A bad valve body can make the reverse gear not work in the 4L60E. If the valve body ends up warped, or if the gasket fails, it’s entirely possible that the gear won’t engage. Booster Valve- A bad booster valve can leave you without reverse in a hurry. Sun Shell- A broken sun shell will cause…
If the not moving issue changes direction (Will run in reverse, but not forward) the switch has gone bad and need to be replaced. It is usually that simple. The best case scenario is that you only need to replace the Forward-Reverse F&R switch. You can find a replacement F&R switch for 48 volt carts here.
What causes a par car to not move in reverse?
What could cause a Par Car golf cart to not move in reverse? Case Details: It moves normally when going forward. Most problems of this kind are caused by a faulty forward/reverse switch. It will be a toggle switch or a lever that is located at knee level.
Why is it having trouble moving in reverse?
So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets. They replaced the main shaft and now the problem is gone. Read more at http://www.honda-tech.com/showthread.php…
Why does my car go forward and reverse at the same time?
The crack would open up when the trans oil was hot (and thinner), so when reverse was selected, it would also engage the forward drive gear at the same time (^ due to pressure bleed). So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets.
