Why does my Chevy Silverado stall in reverse?
Why does my Chevy Silverado stall in reverse?
Sounds alot like a bad ground and/or battery connection problem. THe stalling in reverse could be caused by the movement of the engine in the opposite direction due to the reverse torque combined with a loose ground cable on the engine. Hope this helps.
Why does engine stall when brake is applied at idle?
If your brake pedal is stiff and it stalls when you apply the brakes, it sounds like the diaphram in you brake booster may be ruptured. Do what Steve said and pull the vacuum line to the booster and cap it off and see if it still stalls. If it doesn’t stall, then it’s time for a new booster.
When did Chevy Silverado start stalling at highway speeds?
April 2007, Stalling ocurrred at highway speeds (first time), diagnosis was faulty PRV and repaired. Stalling contiuned intermittently after replacement.
Why is my GMC Sierra 1500 stalling and dying?
There is no code given. Have changed the injectors, timing, fuel tank, fuel pump, fuel pump, map sensor, cooling temp sensor on front of block, rebuilt the tbi, air idea valve. None of this hasite helped. The truck starts and dies. Have to give a little gas to keep running. While driving have to 2 foot it so it won’t die.
Why does my Chevy Silverado stall at low rpm?
Stalls out while driving at low rpm , changed alternator, battery and 2brand new fuel pumps and still stalls , getting worse, before temp gets up it seems to run A ok ???? Please help !! My silverado idles extremely rough and stalls out when i press on the gas i can sometimes keep it running but barely does anyone know what it could be
Why does the engine stall when I put the car in reverse?
If the engine stalls, it may be caused by a faulty idle control valve, bad O2 sensors, or clogged fuel injectors. In regards to the “pan”, we’re not sure what you are referring, so it may be a good idea to contact one of our local professional mechanics to complete a battery inspection to determine what’s going on with your 2010 Ford Focus.
There is no code given. Have changed the injectors, timing, fuel tank, fuel pump, fuel pump, map sensor, cooling temp sensor on front of block, rebuilt the tbi, air idea valve. None of this hasite helped. The truck starts and dies. Have to give a little gas to keep running. While driving have to 2 foot it so it won’t die.
Why does my brake pedal stall when I apply the brakes?
If your brake pedal is stiff and it stalls when you apply the brakes, it sounds like the diaphram in you brake booster may be ruptured. Do what Steve said and pull the vacuum line to the booster and cap it off and see if it still stalls. If it doesn’t stall, then it’s time for a new booster. Loading…
How long does it take for a GMC Sierra to stop stalling?
If you decide to replace it. Your PCM will have to go through the relearn. Another words, it may take up to 5 miles of driving or 15 minuts for the idle to stop fluctuating. Good luck My 2002 with the 8.1 had a similar problem for a year for which the dealer or various independent repair facilities couldn’t find a solution.
What kind of truck stalls at highway speeds?
I own a 1998 GM Sierra 5.7L 2wd automatic. My truck intermittently stalls while idiling, city speeds and at highway speeds. The idle stall has started in the colder months ( I live in Canada). I can start the engine right away and it runs perfectly until the next time it stalls.