Easy lifehacks

Why are the warning lights on my Dodge truck not turning off?

Why are the warning lights on my Dodge truck not turning off?

Bad BCM…BODY CONTROL MODULE. I just had the truck back from the dealer for another issue relating to warning light coming on the dash. i wonder if the two issues are related or if the dealer messed something up… Bad BCM…BODY CONTROL MODULE.

Why does my car make a clicking noise when I Turn on the ignition?

The purpose of the clutch position sensor is to allow the vehicle to start only when the clutch pedal is depressed, so if it fails the car won’t go anywhere. Starter motors sometimes, but not always, make clicking noises when they fail to work. If you turn the key in the ignition and hear a clicking sound, you may have a broken starter.

Why are the dash lights not working on my car?

All relays and battery are fine. Dash lights work when headlights are on. I’m thinking its some kind of electrical problem. I got it to start one time with the remote start. After that, nothing. I’ve tried jump box to be sure I have power. All electronic systems work except the dash lights, and ignition.

How can you tell when your car won’t start but Lights Come On?

Luckily for all drivers, you can tell when your car has blown a fuse. Detecting a damaged fuse is one of the first steps in figuring out what prevents the engine from starting. Analyzing and diagnosing the broken fuse’s location can help you prevent the “car won’t start but lights on” scenario in your vehicle.

Where does the clicking noise come from on a Dodge Ram?

When I have my window down I can hear a clicking noise coming from what sounds like the front left part of the axle. The cadence of the sound correlates with the speed.

Why does my car make a clicking noise when I start it?

Because the starter is not getting enough electricity to stay powered and crank the engine, the system’s repeated attempts make a clicking sound. Follow these steps toward a resolution: Try jump-starting the car. If it starts, then dies, you might have an issue with the alternator.

What should I do if my Dodge Ram won’t start?

If it starts you have a poor ground between batter (neg) and the block. This problem is not limited to dodge. Check the body ground under the battery tray and the wires leading to it. While the battery and tray are out of the way it’s an opportune time to remove the adjacent fuse and relay box and check the connectors underneath it for corrosion.

Why does my Dodge Grand Caravan not start?

It’s a less common cause for the problem, but the hard work to get to it is already done, My 2004 dodge grand caravan wouldn’t turn over. Replaced the battery, and still wouldn’t start. It ended up being the solenoid wire to the starter is loose. If I wiggle it, it will start. Looking to get a replacement wire. Was this answer helpful? Need help.

What to do if your dash light is not turning off?

If you do, download and do the update. Called my buddy (Dodge service advisor) and he had me disconnect the battery terminals for 30 minutes for a cold reboot. Hooked everything back up and all is good now. The dash and shifter lights turn off as they should.

Why are the dash lights on my Dodge longhorn not working?

Well I have a 2015 Dodge Ram longhorn and my truck started doing the same thing after I left my sun roof open and it sprinkle in my truck a little. It’s at the dealer now and they can’t figure out what’s going on with it. They also have put a new cluster in it but still no change.

What to do if your dash gauge is not turning off?

No issues to report after I did the cold reboot. Just disconnect your battery terminals, ground them to each other, let it sit for 30 minutes, then reconnect. If it happens again then bring it in. This is what the dealer will do anyways if you bring it to them.

Is the Check Engine light still lit on Dodge Ram?

This article applies to the Dodge Ram 2nd, 3rd, and 4th Generation (1994-Present). It’s not uncommon for a check engine light to remain lit long after the issue setting it off in the first place has been fixed.

How to reset PCM and check engine light in Dodge Ram?

The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC.

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

What are the features of a Dodge Charger?

That’s why the Dodge Charger packs plenty of standard and available safety and security features to help keep you and your passengers protected. Give your Dodge Charger a personalized touch. Add one of these appearance packages for a customized ride that’ll be the envy of all drivers. Available in multiple trims. Select a vehicle to explore.

Author Image
Ruth Doyle