What should I do if my engine fan clutch is loose?
What should I do if my engine fan clutch is loose?
Once the fan is loose simply keep rotating the fan in the same direction while watching the threads to make sure the fan clutch in turning without the nut. If the nut is not turning use the wrench to help it along. Use your opposite hand to support the fan blade so it does not hit the radiator and cause a leak when the fan becomes loose.
How big is the nut on a fan clutch?
1. Identify the Nut Size Each fan clutch will have its own mounting nut size which will range from 22mm to 36mm depending on the application and manufacturer. You can also use a large adjustable wrench if you do not have the proper tool. You may need to remove the fan shroud to get at the cooling fan. 2. Hold the Water Pump Pulley
How do you remove a fan clutch from a water pump?
Once the new part has been installed gently slip the fan clutch down in front of the water pump using caution as to not contact the radiator or damage the plastic fan blade. The threads on the water pump flange are large and can be cross threaded easily so we advise you to start the fan nut by hand before taking a wrench to it.
How much does it cost to replace a fan clutch?
How Much Does it Cost? When having your car’s fan clutch replaced at a garage or dealer it can cost between $155.00 and $290.00 (US) depending on the design and the manufacturer of the car. But when you do the job yourself with the help of our guide you can buy the fan clutch from Amazon for between $36.00 and $155.00 (US).
How do you remove a clutch fan from a Dodge Dakota?
Remove the hex-head bolt behind the fan using an open-end wrench. Turn it off of the pulley, then lift the fan and clutch out of the engine. Unbolt the fan from the clutch using the 3/8-inch ratchet and socket.
What happens to the fan when the clutch goes out?
This clutch spins the fan in proportion to the speed of the engine. When the clutch goes out, the fan spins directly with the engine and is not controlled by speed anymore, and cooling by the fan becomes less efficient. Replacing the clutch starts with removing it, which should take about 15 minutes to do. Pop the hood.
What happens when you take the clutch out of a Dodge Dakota?
This clutch spins the fan in proportion to the speed of the engine. When the clutch goes out, the fan spins directly with the engine and is not controlled by speed anymore, and cooling by the fan becomes less efficient. Replacing the clutch starts with removing it, which should take about 15 minutes to do.
What happens to the fan in a Dodge Dakota?
The engine driven fan on the front of a Dodge Dakota has a clutch on it to control the speed at which it moves. This clutch spins the fan in proportion to the speed of the engine. When the clutch goes out, the fan spins directly with the engine and is not controlled by speed anymore, and cooling by the fan becomes less efficient.
