Most popular

What should I do if my oil change light does not go out?

What should I do if my oil change light does not go out?

If it does not flash and remains on, turn the ignition key to the off position and then retry the procedure. After the change oil light flashes, it should go out. If the change oil remains on for five seconds (depending on the year and model Chevy), it may not have reset. Start the engine and wait for all the illuminated instrument panel…

How do you reset the oil change light on a Chevy?

Sit inside the driver’s seat of the Chevy and close the driver’s side door. Insert the key into the ignition and then turn it to the accessory power position (also known as key-on/engine-off). All the lights will be displayed on the instrument panel. Depress the accelerator pedal fully to the floor three times within a five second span.

How do you reset the oil change light on a Jeep Wrangler?

For certain Jeep products, including the Wrangler, how to reset an oil change light is as follows: Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset.

How to reset oil change light on GMC Vic?

The Chevrolet GMC models that come with a VIC or the models that introduce from 2006 are going to have the benefit from the following procedure: Turn the ignition key to the accessory position. With the oil message displayed, locate the enter button on the driver information center. Press and hold the button for one second.

How to reset oil service light in GMC trucks?

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007. Turn the ignition to run (one position before starting engine). Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Oil Soon light flashes the system is resetting. Turn the ignition off and then start the engine to verify the indicator has been reset.

How to reset the oil soon light on a Chevy Silverado?

Chevy Silverado Truck Change Engine Oil Soon Light Reset Steps: 2011-2015 Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)

What to do if your oil change light does not turn off?

Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process. 1. Turn the key to the accessory power position.

How do I reset the oil soon light?

Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”. Press and hold the SET button until the display reads “100 percent”. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.

Author Image
Ruth Doyle