What is an axle code?
What is an axle code?
These codes usually indicate the date the axle was manufactured, the plant in which the axle was manufactured, a Bill of Materials (BOM) code that can be looked up to identify a replacement part, and the gear ratios for the rear differential.
Is a 3.31 axle good for towing?
Normally, the 3.31 would get you better gas mileage, on highway. But, with the 3.55 you will get a bit more pulling power so less time at higher RPM to get your trailer moving and when going uphill. If most of your towing is flat highway, the 3.31 should do you fine.
Where do you find the Axle code on a Ford truck?
Identify Your Ford Truck Axle From The Door Sticker. There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code.
What is the Axle code for a 2004 Ford Excursion?
2004 Ford Super Duty Axle Codes: 31 — 3.73 non-limited slip, F-250/Excursion 32 — 4.10 non-limited slip, F-250 41 — 3.73 non-limited slip, F-350
What does the L mean on a Dana axle?
The ‘L’ indicates the gear ration is of a locked traction type. The remaining alphanumeric code will be of varying length and indicates the plant in which the axle was made or, on the Dana axle — the code is located on the shaft — the code represents the “Bill of Material” number for the axle. Don’t waste time trying to look up the model number.
Where are the numbers on an axle tag?
Write down the five sets of data contained on the tag — or three sets stamped on the Dana cover, the remaining two sets will be stamped on the long shaft of the axle. Each set will contain numbers, letters or an alphanumeric combination that is a unique identifier for the axle.
Identify Your Ford Truck Axle From The Door Sticker. There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code.
What does the rear axle identification code mean?
The rear axle identification code consists of a three letter prefix indicating the gear ratio, four digits indicating the assembly date as month/day, and a single letter suffix indicating the manufacturing location.
What is the rear axle casting date code?
410409N 2 2.56:1 & down rear axle casting date code Rear Housing Casting Date Example: D143 – (D = Month, 14 = Day, 1 = Last digit of year (1973)). Month: A = Jan, B = Feb, C = Mar, D = Apr, E = May, F = Jun G = July, H = Aug, I = Sep, J = Oct, K = Nov, L = Dec
The ‘L’ indicates the gear ration is of a locked traction type. The remaining alphanumeric code will be of varying length and indicates the plant in which the axle was made or, on the Dana axle — the code is located on the shaft — the code represents the “Bill of Material” number for the axle. Don’t waste time trying to look up the model number.