Easy lifehacks

What are the warning lights on a 2003 Chevy Trailblazer?

What are the warning lights on a 2003 Chevy Trailblazer?

Various warning lights can illuminate on the instrument panel of your 2003 Chevy TrailBlazer to let you know when the vehicle needs to be serviced or repaired. The instrument panel may display lights such as “ABS” for the Anti-lock Brake System, “Check Engine”,…

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

What are the temperature settings on a Chevrolet TrailBlazer?

Press the button repeatedly to cycle through the temperature settings of high, medium, low and off. The indicator lights will glow to designate the level of heat selected: three for high, two for medium and one for low. The low setting warms the seatback and cushion until the seat temperature is near body temperature.

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

What is the warning light on my Trailblazer?

Warning light: wrench with wheels and axles I have a ’06 Chevy TrailBlazer EXT. On my way home from work, a dashboard warning light came on, a wrench and outline of the 4 wheels and the axles. The front wheels are turned to the right, if that matters.

What are the symptoms of a bad alternator in a Chevy Trailblazer?

Here are the most common symptoms of a bad alternator in a Chevy Trailblazer: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage. In rare occasions the service engine soon light may light up.

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

Press the button repeatedly to cycle through the temperature settings of high, medium, low and off. The indicator lights will glow to designate the level of heat selected: three for high, two for medium and one for low. The low setting warms the seatback and cushion until the seat temperature is near body temperature.

When does the ABS light come on on a trailblazer?

Your Chevy Trailblazer’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Trailblazer does not have Anti-Lock brakes, and the safety they provide. Your Trailblazer’s ABS system uses a system of sensors to determine wheel speed when braking.

Is it safe to use the brake light on a trailblazer?

The brake light indicates that there is a problem with the physical braking system and that your Trailblazer is unsafe to drive. Yes, you can drive your Trailblazer with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven.

How do you reset the Check Engine light on a trailblazer?

After you’ve completed the necessary work on your Trailblazer, you need to know how to reset the check engine light. Because fault codes are generated and stored on the Trailblazer’s electronic control unit, you’ll need to reset the system; otherwise, the light will stay on. Turn the ignition key to the “II” position.

Various warning lights can illuminate on the instrument panel of your 2003 Chevy TrailBlazer to let you know when the vehicle needs to be serviced or repaired. The instrument panel may display lights such as “ABS” for the Anti-lock Brake System, “Check Engine”,…

Your Chevy Trailblazer’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Trailblazer does not have Anti-Lock brakes, and the safety they provide. Your Trailblazer’s ABS system uses a system of sensors to determine wheel speed when braking.

The brake light indicates that there is a problem with the physical braking system and that your Trailblazer is unsafe to drive. Yes, you can drive your Trailblazer with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven.

After you’ve completed the necessary work on your Trailblazer, you need to know how to reset the check engine light. Because fault codes are generated and stored on the Trailblazer’s electronic control unit, you’ll need to reset the system; otherwise, the light will stay on. Turn the ignition key to the “II” position.

What is the diagnostic code for a Chevy check engine light?

Remember, these are manufacturer specific codes only. Refer to our Generic OBD II code list for definitions on all other Chevy diagnostic trouble codes. Manufacturer Specific Codes P0342Camshaft Position Sensor A Bank 1 Low Input – Related Information P1031HO2S Heater Current Monitor Control Circuit Sensors 1

Where are the fuses on a Chevy Trailblazer?

Pop open the hood of the vehicle and locate the fuse panel cover. This is on the underside of the driver’s-side dashboard. Open it by pulling down on it from the top with your fingers. Look on the fuse panel cover for a diagram showing the fuse locations.

Where do I find the trouble code on my Chevy?

These are listed in numerical order for easy searching. When retrieving Chevy trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

When does the Check Engine light come on on a trailblazer?

The engine or check engine light will illuminate on the control panel of your TrailBlazer when the vehicle needs routine maintenance, if there is a problem with its emissions control system or if the computer detects a change in engine performance.

How do you reset the fault code on a trailblazer?

Because fault codes are generated and stored on the Trailblazer’s electronic control unit, you’ll need to reset the system; otherwise, the light will stay on. Turn the ignition key to the “II” position. Open the hood of the car, then open the fuse panel cover located in the engine bay.

When does the Check Engine light come on?

The check engine light on your 2003 Trailblazer comes on when regular maintenance is required, or when there is a problem related to the vehicle’s emissions control system. The check engine light can also, in rare instances, refer to various sensors related to engine performance.

Where are the IGN fuses on a trailblazer?

Then, pull the PCM BAT and PCM IGN fuses from the fuse panel. Use the fuse diagram on the underside of the cover to locate these fuses. Wait five minutes and then turn the ignition key to the “off” position. Place the fuses back into the fuse panel, in their proper location. Start your Trailblazer to verify that the check engine light went off.

How many miles should a Chevrolet TrailBlazer have?

Taken it to Sinaloa Mexico from Texas about 5 times, Florida 2 times, California 2 times, and Chicago. we got to 300,000 when I was 10 and replaced the engine now it has 200,000. Crashed it at 16 parked it for a year. Fixed it up , changed the oil, installed new fan, speakers, radio, compressor, lights, window, and other minor parts.

How often should you change the oil on a trailblazer?

22 people found this helpful. I have a 2006 trailblazer with 301000 miles on it. Replaced the transmission at 265000 miles , I put all the miles on it . Mostly country roads and highway, had oil changes done every 3000 miles . I am using synthetic oil now for about 150000 miles.

What should I do if my airbag light keeps flashing?

Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube

Where can I find the owner’s manual for the Chevrolet TrailBlazer?

2021 chevrolet.com (U.S.) chevrolet.ca (Canada) Trailblazer Owner’s Manual 2021 Trailblazer Canada My Chevrolet App Download the my.Chevrolet App for full manuals and “how to” videos. The full owner’s manual is located with your vehicle infotainment system, if equipped.

Who is the owner of the 2006 Trailblazer?

2006 Chevrolet TrailBlazer/TrailBlazer EXT Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the names TRAILBLAZER and EXT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed.

Where are the power seat controls on a Chevrolet TrailBlazer?

If you have this feature, the power seat controls are located on the outboard side of the front seat cushions. Move the front of the seat control up or down to adjust the front portion of the cushion. Move the rear of the seat control up or down to adjust the rear portion of the cushion.

How much does a Chevy Trailblazer instrument cluster cost?

All of my gauges are failing except for the speedo. I had brought the truck to a chevy dealer and they didnt know what was wrong, they did not have an answer except to replace the instrument cluster for $400. You can buy the stepper motors from ebay for around $36 a set or find a mechanic locally that can rebuild it.

What do you need to know about the Chevrolet TrailBlazer?

4 Introduction Instrument Panel Overview Chevrolet Trailblazer Owner Manual (GMNA-Localizing-U.S./Canada- 14400528) – 2021 – CRC – 11/7/19 Introduction 5 1. Air Vents0178. 2. Turn Signal Lever. SeeTurn and Lane-Change Signals0117. IntelliBeam System Button (If Equipped). SeeExterior Lamp Controls0114. 3. Instrument Cluster089.

Is the Chevy Trailblazer LTZ under warranty?

I also have a 2003 chevy Trailblazer LTZ. I have only had it for 8 months and it has been one thing after another. I had only had it 1 week and the rear end went. I had to fight them to fix it under my warranty, but they finally did. Now my speedomoter is acting up. It (like many others) is acting as though 70 or even 120 is the 0.

Is there a recall on the Chevy Trailblazer?

Sometimes it doesn’t work at all. I ahve contacted Chevy about this and they said they will not fix it because my original factory warrany is up. They have recalled the speedomoter cluster’s on Tahoe, Avalanche, and a few others also, but will not recall the Trailblazer. I have wriiten to the Better Business Bureau as advised by my dealership.

What does a dashboard warning light on a Chevy truck mean?

Whether you drive a Chevrolet car or truck, you may have a dashboard warning light appear. If so, select your model of Chevrolet to find out what those dash lights mean, with each symbol explained. It’s not always clear what a dashboard warning light means.

Is it possible to reset the warning lights on the dash?

This will result in a warning light appearing on your vehicle’s dashboard. After the repair is complete, however, it may still be necessary to reset your the computer in order for the warning light or lights to disappear. Fortunately, this process is fairly simple. Open the hood of your vehicle.

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Pop open the hood of the vehicle and locate the fuse panel cover. This is on the underside of the driver’s-side dashboard. Open it by pulling down on it from the top with your fingers. Look on the fuse panel cover for a diagram showing the fuse locations.

Then, pull the PCM BAT and PCM IGN fuses from the fuse panel. Use the fuse diagram on the underside of the cover to locate these fuses. Wait five minutes and then turn the ignition key to the “off” position. Place the fuses back into the fuse panel, in their proper location. Start your Trailblazer to verify that the check engine light went off.

What does the Check Engine light mean on a trailblazer?

The check engine light can also, in rare instances, refer to various sensors related to engine performance. After you’ve completed the necessary work on your Trailblazer, you need to know how to reset the check engine light.

What is the mode door actuator on a 2003 Chevrolet TrailBlazer?

2003 Chevrolet Trailblazer: The mode door actuator..controls..airflow… Is there a simple method… Is there a simple method in replacing the ‘mode door actuator’ in a 2003 Chevrolet Trailblazer? The ‘mode door actuator’ controls directional airflow inside the vehicle.

Is the ignition module on a 2003 Chevy Trailblazer?

The ignition module is new and was replaced by the Dealer. Yes, they were replaced the same time. Yes, the transmission shifts ok.

Author Image
Ruth Doyle