Most popular

Where is the valve cover on a Chevy Tahoe?

Where is the valve cover on a Chevy Tahoe?

The third pic shows whats under the valve cover. 4th pic shows the underside of cover, with hold-down bolts. The gasket sits in a groove around the base of the cover, easy to remove and replace. Since it’s rubber, it does not require any sealant, or so I have been told.

Where is the oil deflector valve on a GMC ACM?

This valve is located on the oil pan rail and prevents excessive oil pressure from negatively impacting the AFM components. The original version sprayed oil on the cylinder walls and increased oil consumption. In 2010, GM added a deflector (p/n) NAL-12639759 to redirect in into the pan.

How to replace a gasket on a Chevy Tahoe?

I do not recommend removing them off the spark plugs themselves (I broke the first one by trying this–10 year old wires beak). Leave them dangling from the spark plugs. After you get the coil packs off, then clean the dirt from around the valve cover. Then you can back out the 4 bolts that hold down the cover running along the center of the cover.

What kind of valve cover for Chevy Suburban?

Upgraded Valve Cover Works!!! Just finished installing this Dorman 264-969 Driver Side Valve Cover on my 2007 Chevy Suburban with 5.3L engine. This product is well made and fit my truck beautifully. This product is the upgraded design with the relocated square baffle for the pcv vent to minimize the excessive oil consumption issue.

Can a Chevy Escalade use a 264-965 valve cover?

Details Driver Side Valve Cover with Gaskets – Compatible with 4.8L 5.3L 5.7L 6.0L 6.2L Cadillac Escalade, Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon – Replace 12570427 264-965

The third pic shows whats under the valve cover. 4th pic shows the underside of cover, with hold-down bolts. The gasket sits in a groove around the base of the cover, easy to remove and replace. Since it’s rubber, it does not require any sealant, or so I have been told.

I do not recommend removing them off the spark plugs themselves (I broke the first one by trying this–10 year old wires beak). Leave them dangling from the spark plugs. After you get the coil packs off, then clean the dirt from around the valve cover. Then you can back out the 4 bolts that hold down the cover running along the center of the cover.

Author Image
Ruth Doyle