How does tire pressure monitoring system work on Chevy Impala?

Gm is in the news about how they have come back, well on their come back trail can they please fix this. Tire pressure monitoring system provides readings for incorrect tire. Tpms reported pressure for driver side rear when actual reading was for passenger front.

When to do a TPMS reset on a Chevy Impala?

It is also recommended to do a TPMS reset after a wheel or sensor replacement. Use the VT56 or VT46 branded tools to change placard pressure for the Chevrolet Impala, years 2008-2020, if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires.

When to change the placard pressure on a Chevy Impala?

Use the VT56 or VT46 branded tools to change placard pressure for the Chevrolet Impala, years 2008-2020, if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires. Please note: to determine appropriate placard pressure, always follow the tire load and inflation standards.

Is there an indicator light on the TPMS system?

An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). A TPMS relearn is recommended after a sensor replacement or tire rotation.

What does TPMs do on a 2007 Chevy Impala?

The 2007 Chevrolet Impala is equipped with a Tire Pressure Monitor System (TPMS) that uses sensors to monitor tire pressure levels. The Impala’s display on the instrument panel shows a low tire pressure alert if it senses that one or more of the tires is below the recommended air pressure. The display shows the current pressure of each tire.

How does the tire monitor work on a Chevy Impala?

What causes a wrong tire pressure reading on a Chevy Impala?

Tpms reported pressure for driver side rear when actual reading was for passenger front. Incorrect reading could cause driver to check the wrong tire, conclude that tire was drivable, then have tire failure on the different tire. See all problems of the 2008 Chevrolet Impala .

Where is the tire sensor on a 2007 Impala?

Exit the Impala and move to the driver’s side front tire. Remove the valve stem cap from the tire. Increase or decrease the air pressure of the tire for five seconds to activate the tire pressure monitoring sensor. The horn will make a chirp sound to indicate that the sensor has been activated. Move to the passenger’s side front tire.