How do you program a key fob for a 2009 Dodge Ram 1500?

How do you program a key fob for a 2009 Dodge Ram 1500?

2009 Dodge Ram Truck (1500, 2500, 3500)

1. Insert First Programmed Key. INSERT a working remote head key into the Ignition and TURN it to the ON/RUN position.
2. Remove First Programmed Key.
3. Insert Second Programmed Key.
4. Remove Second Programmed Key.
5. Program Remote.
6. Program Additional Remote.
7. Exit Programming Mode.
8. Test Remotes.

Can you start Dodge Ram without key fob?

How do you start a RAM truck with a dead key fob? This is the same process as when you need to start it without your key fob. Get the regular key out of the back of the fob, press it against the ignition, press the brake and you’re good to go! You can also replace your key fob battery and use the fob.

How do you start a 2009 Dodge Ram 1500 without the key?

If you sit in the truck and look at the dash, you will see that there is a green ring that lights up around the start icon. If you simply put your foot on the brake and keep it there, the truck will start without the key fob being present.

Can a key fob be replaced on a Dodge Ram?

Ram key fob. This is the most cited reason as to why a fob is malfunctioning. It’s also the easiest to replace. A new battery costs less than $2 and can be picked up anywhere batteries are sold. To access the battery housing unit, just use a butter knife or flat-head screwdriver to open the fob up.

How does the keyless entry work on a Dodge Ram truck?

INSERT the second working remote head key into the Ignition. TURN the Ignition to the ON position for at least three (3) seconds but no longer than fifteen (15) seconds. After ten (10) seconds a chime will sound and the vehicle’s security light will begin to flash. TURN the Ignition to the LOCK position and REMOVE the second remote head key.

How to program a remote fob for a Dodge Dakota?

INSERT the NEW remote head key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle security light will STOP flashing. It will FLASH again to indicate successful programming of this remote head key. REPEAT Step 5 to program any additional remotes to your vehicle.

How does the fobik remote work on a Dodge Ram truck?

INSERT the first working FOBIK remote key into the Ignition and TURN it to the ON/RUN position. WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key. INSERT the second working FOBIK remote key into the Ignition and TURN it to the ON/RUN position.

Do you need key fob for Dodge Ram 3500?

Buy your next DODGE RAM keyless entry remotes and save up to 75% off dealership prices on key fobs for RAM 1500, RAM 2500 or RAM 3500! Lost or broke your existing keyless remote key fob or chip transponder key for your full size truck?

How much does it cost to program a Dodge key fob?

Estimated cost programming Dodge key fob – Dealership. These are average costs: (Depends on your location, the dealership, and more) Cutting the key: Usually around $80. Programming the key: Usually around $80. In addition, you will have to two your car to the dealer which is an additional expanse of $100 (estimate)

What kind of key do I need to program my Dodge remote?

B. There are a few transponder keys (Y160-PT, Y164-PT, FOBIK, Push to start remotes, etc) that work on Dodge models. You must have the right type of transponder key that matches your model and year. Otherwise, the key will not program. You can check the right key for the exact make and model here.

What to do if you lose your key on a Dodge?

In other words, if you find your old key after programming the new one, it will not work. Therefore, we highly recommend having at least two new cut keys and program them both. B. There are a few transponder keys (Y160-PT, Y164-PT, FOBIK, Push to start remotes, etc) that work on Dodge models.