How do I reset my 2001 Honda Civic?

How do I reset my 2001 Honda Civic?

These are the steps:

1. Turn the ignition switch to the OFF position.
2. Press and hold the SELECT/RESET button.
3. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine).
4. Hold the SELECT/RESET button for about 10 seconds.

How do I reset the running light on my Honda Civic?

If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button. NOTE: See bottom photo for location of the SELECT/RESET button.

When does the Honda Civic maint REQ’D light go off?

After 10 seconds, the MAINT REQ’D light will reset and turn off. The MAINT REQ’D light is designed to illuminate (whenever the engine is running) after 10, 000 miles. After the MAINT REQ’D light is reset, it will illuminate when the ignition switch is turned on then will go out after 2 seconds.

How to reset maintenance required light ( 2001-2005 )?

If the lights are on, the MAINT REQ’D light will not reset. If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. These are the steps: Turn the ignition switch to the OFF position.

How to turn off the maintenance required light on a Honda Accord?

Depress and hold the odometer-trip button with your right hand and then power on the Prius with the ignition button with your left hand. Continue to hold the odometer-trip button until the “Maint Reqd” light goes out on the instrument panel. How to Turn Off the Maintenance Required Light on a Honda Accord (1998, 1999, 2000, 2001)

How do I reset maintenance light?

Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.

How do I Turn Off the maintenance required light on my Honda?

How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.

What does the service code B1 mean on a Honda Civic?

The “B” represents an oil and filter change plus mechanical inspection, while the “1” means it’s time to have the vehicle’s tires rotated. When the Maintenance Minder system indicates that your fit needs B1 service, the service should include the following inspections, according to the Honda Fit ’s owner’s manual:…