Can you reset the airbag light on a Chevy Avalanche?

You can reset the airbag light on your Chevy Avalanche from your home garage, saving yourself money and a trip to the dealership. The airbag light, called an SRS or Supplemental Restraint System light, illuminates when there is a malfunction with the vehicle’s airbag system.

What’s the price of a 2007 Chevy Avalanche?

In LS trim with rear-wheel drive the Avalanche starts at $33,235. A midlevel Avalanche LT stickers for $33,940, while the top-of-the-line LTZ has a Manufacturer’s Suggested Retail Price (MSRP) of $40,670. Four-wheel drive boosts each figure by $3,000.

Is the Chevy Avalanche a full size SUV?

Redesigned for 2007, the second-generation Avalanche is built on GM’s new full-size SUV platform, which is also used for the Chevrolet Suburban and GMC Yukon XL, and it offers improved fuel economy and Flex-Fuel (ethanol/gasoline) operation.

What kind of engine does a Chevy Avalanche have?

Used 2007 Chevrolet Avalanche Engine. The standard engine is a Vortec 5.3-liter V8, matched to a four-speed Hydra-Matic transmission. Four-wheel-drive models use a version which can operate on E85 or gasoline. A 366-horsepower, 6.0-liter V8 with variable valve timing is optional.

Why does the airbag light stay on in my Chevy?

If your Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage. While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident.

What is the SRS light on an avalanche?

The airbag light, called an SRS or Supplemental Restraint System light, illuminates when there is a malfunction with the vehicle’s airbag system. Do not drive the Avalanche if you see this light because the airbag could accidentally deploy while you are driving or possibly not deploy when you need it during an accident.

When did the first Chevy Avalanche come out?

Breaking with a long-standing tradition, the Avalanche was not available as a GMC, but only as a Chevrolet. Production of the Avalanche started in September 2001 and ended April 2013; producing two generations in its lifespan. The Avalanche was launched in September 2001 as a 2002 model on the GMT800 platform.

How does the airbag scanner work on a Chevy?

Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port. The port is trapezoid in shape and allows the scanner to plug only in one direction. Turn on the ignition. Do not start the engine. If your Chevrolet has a START/STOP button, press this button without pressing the brake pedal. Allow your Chevrolet airbag scanner to power on.

Where is the diagnostic port on a Chevy Avalanche?

Connect the OBD scan tool’s data cable to the Chevy’s diagnostic port under the dashboard near the steering column. This is a 16-pin port. Power on the OBD scan tool and find the PCM menu on the face of the scan tool. Use the arrow keys to select “Codes” and then “Clear All Codes.” Wait for the scan tool to finish.

Do you need to reset the airbag on a Avalanche?

Do not drive the Avalanche if you see this light because the airbag could accidentally deploy while you are driving or possibly not deploy when you need it during an accident. You need an automotive scan tool, called an OBD scan tool, to reset the computer and shut off the SRS light. This tool can be obtained from any auto parts retailer.

Why does my GM airbag light come on?

The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear. GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)

Where do I find the service airbag message?

The service airbag message is something that can appear on the DIC of your vehicle, which stands for driver information center.

What to do when your airbag light comes back on?

After you clear the Chevrolet airbag light, turn off the ignition then back on to determine if the airbag light has been reset. Go back to the Airbag / SRS control unit. Scroll down to Clear / Erase Fault Codes and press enter. If the problem hasn’t been fixed, the airbag light will come back immediately or as soon as the problem is detected again.

Who is the owner of the 2005 Avalanche?

2005 Chevrolet Avalanche Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name AVALANCHE are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

Where are the controls on a Chevy Avalanche?

If your vehicle has power seat(s), the controls are located on the outboard edge of the front seats. 1-2 Horizontal Control: This control adjusts the seat cushion. •Raise or lower the front of the seat by raising or lowering the forward edge of the control. Raise or lower the rear of the seat by raising or lowering the rear edge of the control.

Where is the power lumbar adjustment on a Chevy Avalanche?

If your vehicle has power lumbar adjustment, you can use it to increase or decrease lumbar support in the lower seatback. The control is located on the outboard side of the seat cushion. •To increase support in the lower back area, press and hold the front of the control.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

Why does my airbag light turn off after a crash?

The SRS system has a backup battery that steps in during a crash. This battery is charged by the main car battery. When the main battery discharges, the backup battery also discharges. This might cause the airbag light to appear. As you might have guessed, charging or replacing the battery solves this problem and the airbag light will turn off.

Is it possible to reset the airbag light without a scanner?

Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem. In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals.