Can a cat d6-9u Dozer really use some input?

Could REALLY use some input on a Cat D6-9U dozer………..PLEASE and THANK YOU!!! Discussion in ‘ Dozers ‘ started by JDDozerman, Oct 14, 2011 . Hi JDDozerman, A couple fo things I maybe able to help with, first, no the 9U will not be able to push as much as a 14C or even TD15 as they only had as much push as an early D5.

How many engine rebuilds does a Cat dozer have?

To tackle his demanding work schedule, Schinske utilizes quite a remarkable fleet of Cat dozers. Serving as the centerpiece of this fleet is a 1981 Cat D5B Dozer with three engine rebuilds and 53,000 operation hours that still performs as well as it did the day he bought it.

How many hours does a cat D5B Dozer have?

Serving as the centerpiece of this fleet is a 1981 Cat D5B Dozer with three engine rebuilds and 53,000 operation hours that still performs as well as it did the day he bought it. In addition to his Cat D5B dozer, Schinske owns two Cat D6D Dozers with 45,000 hours, a Cat D6H with 12,000 hours and a Cat D6R with 11,500 hours on the engine.

What kind of parts do you need for a dozer?

For all of your earth-moving needs, ConEquip offers all aftermarket Dozer parts to keep your operation flowing smoothly. Our most common part categories include engines, final drives, hydraulic pumps, hydraulic cylinders, turbochargers, transmission, and we offer aftermarket parts in many more categories as well.

Can a D6h transmission get hot in 1st, 2nd?

But usually the water temp runs cooler. Once the dozer gets all good and warm and the transmission temp gets on the hotter side, it is not as smooth shifting into forward and reverse while in 1st, 2nd is just fine. The few pressure test I have done are a little on the lower side.

How do you set timing on a pump?

If the pump shaft had a drive tang on the end it is offset and can only go on one way. The timing is set correctly by putting the engine on TDC and adjusting the drive shaft with a timing fixture. If the pump had a tapered end it will time up with a pin.

How do you timing an injector pump in a truck?

On the bench a degree wheel is put on the pump shaft and a spacer and depth mic are used to find the correct timing shim for each barrel to sit on. Once that is done the drive tang only needs to be correct on the engine. Does anyone in the forum have a timing fixture they would rent or sale?

Is the D5 a filler for the D6B?

The D5 acted as a filler between the D4 and D6 when they upgraded the 9U to the D6b. Secondly, some ag tractors had turbos fitted and seemed to run O.K. but they were only doing draft work. The CAT motor in them was a very nice engine and I’m sure it was one of the reasons why CAT has the reputation it has.

Where is the timing pin on a cat engine?

Slowly rotate the crankshaft counterclockwise (direction of engine rotation) until the timing pin goes into the slot in the fuel injection pump camshaft. Put the timing bolt in the timing hole in the flywheel housing.

How do you set timing on a 3406b cat engine?

How do you set the timing on a 3406B CAT engine. Put the timing bolt in the timing hole in the flywheel housing. Rotate the crankshaft counterclockwise (as seen from the flywheel end of the engine) until the fuel pump camshaft is tight against timing pin (2). This removes gear clearance from the drive train.

Can a d6 9U be used as a roller?

SO ON MY D6 9U KNOWN AS ” ROLLER-LESS ” LOTS OF PICTURES WILL BE TAKEN PLUS A FEW TIPS AS I LEARN THEM. THE FIRST THING YOU WANT TO DO IS TAKE AN OLD FILE FOLDER AND USE IT TO MAKE TEMPLATES.

What are the specifications for a Caterpillar D6 track tractor?

Title Technical Specifications for D6/D6 XE Tr Author Caterpillar Subject D6/D6 XE Track-Type Tractors Keywords D6, D6 XE, Track-Type, Tractors, Dozers, Created Date 12/14/2020 7:53:28 AM

Can a cat d6-9u Dozer really use some input?