Why does my Dodge Ram express not start?

I have a 2017 ram express with 5000 miles on it. I parked it last night and it won’t start this morning. Battery days 90 percent charged. The light come on…..but nothing when you turn it over.

Why is my Dodge ram1500 no power in cab?

It’s very likely a problem with the power control module or the integrated power module. Using a scan tool check to see if there are any trouble codes being stored in the memory of the PCM. Then if there is no trouble codes try doing a complete system reset in case we have a software glitch.

How to reset PCM and check engine light in Dodge Ram?

The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC.

Where is the power distribution center on a Dodge Ram?

Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC. Take a look at the diagram on the back of the cover. Identify the fuse for the PCM.

Is the Dodge Ram 5500 ignition switch compatible?

Register a free business account (X81) Ignition Switch Module This New Mopar OEM factory condition (X81) Ignition Switch Module is compatible with the following vehicles: 2017-2019 Dodge RAM 1500 (Old Body) 2013 – 2017 Dodge RAM 2500 2013 – 2017 Dodge RAM 3500 2013 – 2017 Dodge RAM 4500 2013 – 2017 Dodge RAM 5500 Manufacturers Part #: 68271986AB

What to do if your Dodge Ram does not start?

Sensor always check the connection and for power before replacing it if you do not have the scan tool.

How long to install Dodge Ram 1500 ignition switch?

I have a 2016 RAM 1500, V6, crew cab, 4×4. It literally took 5 min to install. I did not unhook the battery. The remote to unlock the doors worked perfectly instantly. However the remote start did not work until about a week later, so it works beautifully now. Great product!

Why is the gear indicator on my Dodge truck not working?

I replaced the Transmission Range Sensor (TRS) with a new OEM Mopar TRS about $46 and very easy procedure, yet problem is still there. A transmission shop broke it and then claimed it was “an old Dodge truck” however the mechanic suggested replacing the Valve Body so I suspect they broke that and then covered it up. Any thoughts?

What does no start, no crank, no click mean?

Not open for further replies. I went to start my truck yesterday morning and when I got in, turned the key, I got my pillar gauges to light up no problem, turned the key, no crank, no click, no nothing. I checked it out later and I have full power to my lights (headlights and KCs), dash lights work, dome light works.

Why does my car not start when I Turn on the lights?

This is the switch you turn in the key or it could be part of it that is connected to that mechanism in the steering wheel. To troubleshoot this, turn on all your lights, try to start the car. If the light dim considerably, your ignition switch is OK.

How to reset the Check Engine light on a Dodge Ram?

Dodge Ram: How to Reset PCM and Check Engine Light. 1 Step 1 – Remove the PCM fuse. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch 2 Step 2 – Reset the PCM. 3 Step 3 – Re-install the PCM fuse. 4 Related Discussions.

What to do if your check engine light doesn’t work?

Go back and start the truck to make sure that the check engine light has been shut off. If it didn’t work, try again. Once you’ve got it to work, put back the cover for the PDC and close the hood of your truck. If you’re not having much luck with this method, you can also disconnect the battery for 30 seconds.

Where is the reset button on a Dodge Ram?

Why do I need to Reset my PCM on my Dodge Ram?

There are other reasons why you would need to reset the PCM, such as after the installation of aftermarket components that require a PCM reset so the truck can fully adjust to new components. The reset procedure in your Dodge Ram is as easy as they come.

What’s the problem with my Dodge Ram 1500?

Clear indication of a bad Neutral safety switch but really hard to find since it was really random. The key was knowing that no noise is clearly a wiring, switch or sensor issue NOT starter or other mechanical parts. 117 people found this helpful. I took mine to dodge …same problem…they had to flash the computer…around 99 dollars

Why does my fuel pump not start after sitting?

When the key is turned on the fuel pump only gets 2 seconds of power, so if the line pressure is at zero there isn’t enough run time to pressurize the fuel system. Cycling the key a few times forces the pump to run for 6 seconds instead of just 2 and this will pressurize the system and allow for a quick start

Why is my Ford truck not cranking over?

AFTER THE TRUCK SAT FOR 3 DAYS THE TRUCK WOULD NOT CRANK OVER. ALL THE LIGHTS THE LIGHTS CAME ON WHEN THE KEY WAS ON BUT NO CRANK. THE PROBLEM FOUND WAS IN THE WIRING HARNESS.

Why does my Dodge Ram 1500 not start?

While there are a variety of reasons your Dodge Ram 1500 won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

What kind of power does a Dodge Ram 1500 have?

431 people found this helpful. Just got done with my truck (2002 Dodge Ram 1500 4.7L). It clicked a couple of times and didn’t start, tried it again then started. Go to start it again and nothing.

How to tell if your Dodge Ram has a bad safety switch?

Why does my Toyota Tacoma engine not start?

When the computer senses the engine is out of time, it will turn on the check engine light, and the engine may start and stall, or fail to start at all. If the engine runs, it w…

Why does my Dodge Ram express not start?