What is the model number of my 4L60E Trans?

A replacement transmission was purchased from a auto salvage yard. It had supposedly came out of a 2003 Suburban 2500. Now this is where the problem begins. The model number of the replacement 4L60e trans is 9LUD. The trans that came out of my truck was a 2KCD. My truck has the Auto4WD button as well as push buttons for 2LO,4HI and 4LO.

Is the GM 4L60E rear wheel drive transmission the same?

Are all 4L60E transmissions the same? The 4L60E transmission was found behind the majority of GM rear wheel drive vehicles for the almost 20 years. Are 4L60E transmissions the same?

When did the 4L60 transmission replace the 700R4?

Due to its widespread use, this transmission is likely one of the most common transmission on the highways today. This replaced the 4L60 transmission, previously known as the 700R4, beginning in 1992 and used technology to improve on what was already a very popular transmission.

What’s the difference between a 1993 and 1994 4L60E?

When a converter cluych cause it to lose lock up, the 3-4 clutches, in the transmission will soon follow because the 3-4’s need lock up to keep them cool while cruising in overdrive. 1993: These were used in TRUCKS only. Not available in F-Bodies, B-Bodies, or Vettes 1994: Interchangeable with ’93 4L60E with no modifications.

When did the transmission go out on my 4L60E?

The original transmission went out about 6 weeks ago. A replacement transmission was purchased from a auto salvage yard. It had supposedly came out of a 2003 Suburban 2500. Now this is where the problem begins.

Is there a 9lud transmission for a 4WD truck?

From what ive been able to conclude is that the replacement transmission 9LUD is not designed for the trucks with thw Auto 4WD option. The problem im having with this transmission is that it wont engage any of the gears. I was not aware of the different 4L60e transmissions prior to installing it, unfortunately.

What’s the difference between a 93 and 94 4L60E?

1994: Interchangeable with ’93 4L60E with no modifications. The ’93-’94 is a NON PWM transmission. This means that the lock up apply strategy is an on /off arrangement. It has an 11 pin case connector.

What’s the model year of a suburban transmission?

Their chart says that transmission is a 99 model year. Maybe that trans wan’t the original for the suburban. Or they are jerking you around. What was wrong with your trans?

Are there any transmission problems in a trasnmssion?

Every trasnmssion has its own type of problem. Also, if you were in the area of 100,000 miles on your transmission, you better hope that $1700 got you new planet kit, 2/4 hub and rev hub. And, hopefully they aren’t using “white box” parts.

How do you remove transmission from cross member?

With the weight of the transmission resting on the jack, remove the transmission mount bolts. Removing the transmission mount bolts (or nuts) allows the transmission to be separated from the cross member. Remove the cross member to frame mounting bolts and then remove the cross member.

How to replace a worn out transmission part?

Replace your worn out transmission part with this reliable component by Valeo to get optimum performance for your vehicle that won’t cost you a fortune. This top-notch product is precision designed to meet or… Clutch Flywheel by Sachs®. All flywheels are manufactured to meet or exceed OEM standards.

How much does it cost to replace a transmission?

When faced with a transmission rebuild or replacement, you can reduce the cost quite significantly by removing and replacing (R&R) the transmission yourself. Depending on the year, make and model of your vehicle and the shop labor costs in your area, you can expect to save between $550 to $1,250 or more.

What does Dorman’s auto trans oil cooler do?

Dorman’s Auto Trans Oil Cooler is quality-engineered to cool automatic transmission fluid, prolonging its life. The Auto Trans Oil Cooler consequently helps prevent transmission fluid leaks and… Genuine GM Parts™ Automatic Transmission Extension Housing by ACDelco®.

Can a 4L60E be used as a torque converter?

Alternatively, you can use the flex plate and the torque converter from the 4l80e transmission. The engine control unit often has to get reflashed and reprogrammed for the 4l80e transmission to work properly. You can search the web or find a local dealer to do this job for you.

What’s the gear ratio on a GM 4L60E?

The 4L60E is a 4-speed (meaning it has 4 gears) transmission, with gear ratios of 3.06; 1.63; 1:1; 0.70 ( overdrive ). Reverse has a gear ratio of 2.29. It weighs 146 lbs before transmission fluid is added and 162 lbs with it. GM claims that the factory transmission fluid should last the entire working life of the product.

Which is better 4L60E or 4L80E transmission case?

The 4L80e transmission case is longer than the 4l60e transmission, so the cross member has to be modified. You can either purchase an already premade cross member or you can make one yourself with a welder and some skills.

What’s the difference between the 4L60E and 4L80E?

One of the similarities between these transmissions is that both of them are electronically controlled. The bolt pattern for the transfer case is also the same so it will fit in a swap without problems. One thing to consider is that the 4l60e was named th350 and 700r4 before in earlier models and the 4l80e was named th400.

Can a 4L60E fit in a Swap Case?

The bolt pattern for the transfer case is also the same so it will fit in a swap without problems. One thing to consider is that the 4l60e was named th350 and 700r4 before in earlier models and the 4l80e was named th400.

Can you get a driveshaft from a 4L60E?

If your car model came with the 4l80e transmission from the factory, get a driveshaft from one of these models if possible. If not, there are a lot of shops that can make the driveshaft shorter for you. You can also measure and check for a driveshaft on other models to see if you can find one with the same length.

What is the model number of my 4L60E Trans?