What are the parts of a Ford Taurus?
What are the parts of a Ford Taurus?
Install the transmission control selector lever spring clip and the gearshift lever socket bushings on the shift tube. • Coat the gearshift lever socket bushings with premium long life grease. Item Part Number Description 1 — Outer race 2 3517 Bearing (in the ‘‘UP’’ position) 3 — Ball 4 — Inner race 5. Install the ignition switch.
How to install gearshift support on Ford Taurus?
8. Position the gearshift lever in the shift tube. 11.Install the transmission selector lever arm and support on the shift tube. 1 Position the transmission selector lever arm and support. 2 Install the bolts. 9. CAUTION: Gearshift lever pin must be installed correctly or 1st gear position may be blocked.
What to remove from a 2003 Ford Taurus?
9. On a fixed steering column, remove the snap ring from the bottom of the steering column shaft. 12.Remove the two lock cylinder housing pivot screws. 2003 Taurus/Sable, 8/2002
How to remove steering column lock gear Ford Taurus?
For additional of the steering column lock gear, bearing and information, refer to Steering Column in this retainer prior to removal. section. Remove the snap ring. 2. Remove the clockspring. For additional information, refer to Section 501-20B. 3. Remove the multifunction switch. 4.
Why is the transmission not working on my Ford Taurus?
HOLD THE PHONE My Ford Taurus gets in a mood every now and then and starts slipping in gear. Usually all I need to do is get on a highway and it somehow resets the computer to sync the transmission back up.
How to check the transmission fluid in a Ford Taurus?
Check the fluid with the car RUNNING in park fully warmed up. Read the dipstick it will tell you where it should be. With the car off and the key in, foot on the brake pedal. Rapidly go through all of the gears. Sometime the PRNDL switch can get gummed up. How many miles are on the car and when was the last time the fluid and filter were changed?
Install the transmission control selector lever spring clip and the gearshift lever socket bushings on the shift tube. • Coat the gearshift lever socket bushings with premium long life grease. Item Part Number Description 1 — Outer race 2 3517 Bearing (in the ‘‘UP’’ position) 3 — Ball 4 — Inner race 5. Install the ignition switch.
How to disassemble a 2003 Ford Taurus?
Assembly 1 Position the steering column lower bearing retainer. 1. Install the steering column upper and lower 2 Install the bolts. lock actuators. 1 Use multi-purpose grease to lubricate the steering column lock actuators. 2 Install the steering column upper and lower lock actuators. 2003 Taurus/Sable, 8/2002
How to disassemble a Ford Taurus steering column?
On a fixed steering column, remove the snap ring from the bottom of the steering column shaft. 12.Remove the two lock cylinder housing pivot screws. 2003 Taurus/Sable, 8/2002 211-04-3 Steering Column 211-04-3 DISASSEMBLY AND ASSEMBLY(Continued) 13. WARNING: The steering column position spring is under tension and can come out with great force.
How to remove gearshift lever from Ford Taurus?
Remove the gearshift lever retaining pin and Multi-Purpose Grease ESB-M1C93-Bremove the gearshift lever assembly. XG-4 Penetrating and Lock – Lubricant XL-1 Premium Long Life ESA-M1C75-B Grease XG-1-C Disassembly 1.
How to disassembly and assembly a Ford Taurus?
20.Install the turn indicator cancel cam. 21.Install the lock cylinder housing screws loosely and position the steering actuator housing in a vise. • Lubricate the lock cylinder housing screws with penetrating and lock lubricant. 22.NOTE: Lubricate the lock cylinder housing bushings with penetrating and lock lubricant.
Remove the gearshift lever retaining pin and Multi-Purpose Grease ESB-M1C93-Bremove the gearshift lever assembly. XG-4 Penetrating and Lock – Lubricant XL-1 Premium Long Life ESA-M1C75-B Grease XG-1-C Disassembly 1.
How to disassemble a Ford Taurus Sable?
Last updated: 8/9/20042003 Taurus/Sable, 8/2002 211-04-2 Steering Column 211-04-2 DISASSEMBLY AND ASSEMBLY(Continued) 7. Remove the steering column lock housing 10.On a tilt steering column, remove the sensor bearing. ring. 1 Remove the steering column lower bearing spring. 2 Remove the sensor ring.
How to assemble a Ford Taurus steering column?
3. Install the steering column lower bearing retainer. Assembly 1 Position the steering column lower bearing retainer. 1. Install the steering column upper and lower 2 Install the bolts. lock actuators. 1 Use multi-purpose grease to lubricate the steering column lock actuators. 2 Install the steering column upper and lower lock actuators.
Last updated: 8/9/20042003 Taurus/Sable, 8/2002 211-04-2 Steering Column 211-04-2 DISASSEMBLY AND ASSEMBLY(Continued) 7. Remove the steering column lock housing 10.On a tilt steering column, remove the sensor bearing. ring. 1 Remove the steering column lower bearing spring. 2 Remove the sensor ring.
Is the Mercury Sable the same as the Ford Taurus?
For its entire production life, the Sable served as the Mercury counterpart of the Ford Taurus (no Sable equivalent of the Taurus SHO was ever produced), slotted below the Grand Marquis.
3. Install the steering column lower bearing retainer. Assembly 1 Position the steering column lower bearing retainer. 1. Install the steering column upper and lower 2 Install the bolts. lock actuators. 1 Use multi-purpose grease to lubricate the steering column lock actuators. 2 Install the steering column upper and lower lock actuators.
