Is the Goodwrench engine part of General Motors?

Goodwrench Engines As part of General Motors, Chevrolet Performance is able to offer a wide and diverse range of crate engines and partial engines beyond our high-performance Small-Block, Big-Block and LS engines.

When did GM start using the 2.2 liter engine?

The 2.0 got bumped to 2.2 liters sometime in the late 80’s, and got a pretty big increase in hp, but not torque. It was around this time, I think, that they started using the 2.2 as the base engine in vehicles like the Century, Cutlass Ciera, S-10, etc. FWIW, I have a friend who once owned an ’85 Cavalier with the 2.0.

Is the GM 2.2 engine good or bad?

The 2.2 has a very bad reputation, both in reliability and performance. I have driven two S-10s equipped with this engine, and it is completely gutless even on a flat road. I believe it can do 0-60 in about 16 seconds, give or take. If you want a reliable GM motor, go for the Chevy 350 V-8.

What kind of car has a 2.2 engine?

It was around this time, I think, that they started using the 2.2 as the base engine in vehicles like the Century, Cutlass Ciera, S-10, etc. FWIW, I have a friend who once owned an ’85 Cavalier with the 2.0.

How can you tell if a Chevy 350 is a Chevy?

Chevrolet engines are originally painted safety orange; other indicators the engine may be a 350 include tags and markings, either GM or Chevrolet. The only method for positive Chevrolet small-block identification is by recording the casting number on the block and checking it against an engine code list.

When did the Chevy 350 engine come out?

Chevy 350 Engine Identification. A Chevy workhorse for 30 years, the 350-cubic-inch engine was used in production models from 1968 until 1998.

Where to find casting number on Chevy 350?

Look at the rear of the engine block for casting numbers, by where the transmission mounts to the engine. There will be at least one set of numbers on the block. If you need to clean up the block to read the number, use the wire brush in combination with the degreaser.

What was the horsepower of a Chevy 350 in 1989?

In 1989, three vehicles had a 350 — the Corvette, Suburban and G-30 van. There were two 350 options in the 1989 Suburban. One produced 190 horsepower (hp), while the other produced 210 hp. In the G-30 HD van, the 350 produced 185 hp and in the Corvette, it produced 240 hp. Both of the Suburban’s 350s produced 300 foot-pounds of torque.

How can I tell if my Chevy 350 is a 350?

Look for a second casting number on the rear of the block. This number isn’t on every block, but if it is, it will represent the displacement of the engine. A 5.7L code, for instance, means it is a 350-cubic-inch engine. Look at the front of the block, just forward of the valve covers.

Is the GM 350ci a brand new engine?

These are excellent entry-level performance engines for older cars, trucks, and street rods. All of the parts in these engines are brand new.

What is the oil pan number on a Goodwrench 350?

The 12681429 engine includes a 4-quart oil pan Part number 10066039 which has the “double bump out” for both dipstick designs. The oil dipstick for the 10067353 engine for the right-hand (passenger) side of the block is 10190942 (indicator) and 12552920 (tube). If not using right-hand dipstick, use plug 9421743 3/8″

What is the camshaft number on a Goodwrench 350?

Camshaft is 12364051 (327cid/300hp profile). Flat tappet lifters. Machined fuel pump boss. The 12681429 engine includes a 4-quart oil pan Part number 10066039 which has the “double bump out” for both dipstick designs.

What kind of warranty does Goodwrench 350 have?

It is our lowest priced 350 and is great as a small block replacement or V-8 retrofit into any vehicle. This brand new crate engine comes with a GM nation wide warranty and is covered for 2 years or 50,000 miles when used in applicable GM vehicles. Check out our Warranty Information for full details.

What was the name of the Chevy truck in 1971?

Designers applied a new egg-crate design to the grille, and moved the Chevy “bow-tie” logo to its center. Trim levels were reorganized, with Custom becoming the new base. As in the past, “C” designates rear-wheel-drive trucks, and “K” four-wheel-drive.

Where can I find a 1971 Chevy C 10?

1971 Chevrolet C10. 1971 C 10 under 100k miles Long wheel Base Great shape Lots of restoration work Grill replaced Lights replaced Custom paint job 305 engine Non Smoker. Located in Adams TN… More Info › 1971 Chevrolet Cheyenne C 10. Beautifully restored long and lean 1971 c 10. . Original drivetrain with a 350 bored .30 over.

What kind of engine does a 1971 Chevy Cheyenne have?

VEHICLE OPTIONS: -CUSTOM INTERIOR -TACHOMETER -POWER STEERING -DUAL EXHAUS This custom 1971 Chevrolet Cheyenne upgraded to a 4×4 is equipped with 39×18.5-inch Mickey Thompson This 1971 Chevrolet C10 has the true classic look you want in a stepside pickup.