How to add hydraulic fluid to a Mercedes-Benz convertible?

How to add convertible top fluid on a Mercedes-Benz. To add hydraulic fluid to your Mercedes-Benz convertible top reservoir you will need: Mercedes Convertible Top Fluid Pentosin CHF 11S Syntheitc Fluid is often used in lack of the OEM Mercedes hydrauilc fluid. Check for compatability in your owners manual.

What to do if your Mercedes convertible is not working?

Check the convertible top relay as well. Swap it with a known working relay that is identical. You can also bridge the top relay for a couple of seconds to see if the hydraulic pump start to run. Replace the convertible top relay if necessary, PN 0025421319. Next, check the micro switch where the divider locks.

How to fix a leak in a Mercedes convertible?

Leak at the o-ring at any of the lift cylinders. Inspect in the trunk area for hydraulic fluid leak. Low fluid in the convertible top reservoir. Start by pressing the convertible switch. Do the windows go down? If the windows don’t go down, make sure the trunk compartment divider is pulled out. Next, check the fuse for the convertible top.

Where is the convertible top motor in a Mercedes?

Locate the convertible top motor in the trunk. In most Mercedes-Benz cars including SL, SLK, CLK class, it is located in the trunk left or right side. You will need to remove the trunk lining to see the reservoir. Remove the 12mm bolt from the reservoir. Use a clean syringe to add fluid to the reservoir.

What causes a convertible top to go down?

The most common problems, in order of occurrence, are: Frozen pump: Broken or maladjusted tray fold switch: Burned-out relay: Low fluid level in the pump reservoir: Worn pump “O-ring: Poor ground: and Weak battery. (Pictures of 63) TOP DOWN