How much does it cost to replace timing belt on PT Cruiser?

Chrysler PT Cruiser Timing Belt Replacement 2.4 Engine. How to replace the timing belt on Pt Cruiser. We took this video to show you what you need to do in order to replace the timing belt on a Chrysler Pt Cruiser 2.4 Engine. Most Shops and Dealers will Charge you over $1000+ for timing belt replacement.

Why do PT Cruisers have bent valve stems?

To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems.

What should I do if my timing belt breaks?

The belt breaking doesn’t cause other problems but other problem like water pump seizing, cam shaft bearing seizing, timing belt tensioner seizing will break the belt. If you do change the belt either before it breaks or after it breaks you should also change the water pump and belt tensioner at the same time every time.

Chrysler PT Cruiser Timing Belt Replacement Cost Estimate. The average cost for a Chrysler PT Cruiser timing belt replacement is between $763 and $909. Labor costs are estimated between $559 and $705 while parts are priced at $204.

How much does it cost to replace timing belt and water pump?

The cost of replacing a timing belt and water pump varies depending on your car. If you take it to a garage, you should expect to pay between £299 and £600 for the work. If you carry out the work yourself, you can pick up a timing belt and water pump kit for around £40 to £150.

How long does it take to change timing belt?

Changing a timing belt and water pump can take anywhere from 1-3 hours depending on your skill level, so make sure you have the time and space to complete the job. Do the following before you start: Jack up the front of the car so you can access the undercarriage beneath the engine.

What happens if the timing belt fails on a Porsche Cayman?

And if the timing belt fails, whether due to simple age, or the failure of a tension pulley or bearing, the water pump will likely fail along with it. Also, as with the Porsche Cayman’s RMS, the water pump isn’t easy to get at. In fact, ClickMechanic and NAPA explain, you can’t get at the water pump without first exposing the timing belt.

Where is the timing belt located on a car?

True, both are connected to the crankshaft. However, the former is located inside the engine, albeit by the outer wall. The latter is found externally, and drives many of the car’s accessories, like the alternator, power steering pump, and A/C pump. But, as NAPA explains, the timing belt sometimes pulls double-duty.

How much to change timing belt?

A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.

Do timing belts need replacing?

Although timing belts are critical, there’s no need to replace them regularly -unless explicitly recommended in your owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t. Many of today’s timing belts can go 100,000 miles or more without needing to be replaced.

What parts are included in a timing belt kit?

To make things easy, NAPA Auto Parts sells complete water pump and timing belt replacement kit programs for vehicles with timing belt-driven water pumps. The components include the timing belt, water pump, seals and gaskets, pulleys, and tensioners.

Is the water pump connected to the timing chain/belt?

The water pump is attached to an idler sprocket of the left bank of the timing chain. To replace the water pump, both chains need to be removed. This pump has been known to go 200,000 miles or more. If the engine has had timing belt tensioner and guide issues, the sprocket can become worn.

Are there any problems with the PT Cruiser?

In 2002 there were also some issues with the engine in the PT Cruiser that related to timing belt problems. It was not an overarching problem that a lot of drivers experienced, but some did have problems with the belt breaking sooner than it should have. There were a number of problems in 2003 with timing belts failing on drivers.

What was the year of the PT Cruiser?

2009 was also a relatively problem-free year for the PT Cruiser as far as timing belts go. Well it did have some issues for a few drivers, nothing specific was related to the timing belt so if that’s an area of concern for you, the 2009 PT Cruiser is it one that you need to worry about too much.

How to replace timing belt on Chrysler PT Cruiser?

All the marks must be on the right spot. It is the same procedure for all Chrysler Pt Cruiser Models with the 2.4 Non turbo engine. The turbo engine is about the same procedure but the tensioner is a little different. NEVER try to pry the timing belt on the gears with tools. It will take you some time to put it on the gears but never pry it.

What kind of engine does a PT Cruiser have?

I have a 2006 pt cruiser 2.4 litre engine. it broke the timing belt while driving. It has 96,000 miles. is this an interference engine and maybe the … read more Timing belt on 2007 PT Cruiser went. It’s at repair shop. Timing belt on 2007 PT Cruiser went.

Can a PT Cruiser be a valve interference engine?

The 2.4 PT Cruiser is not a valve interference engine. Since the belt has broket, the pistons will not be hit on their tops by the valves, but the valves in the engine can hit each other. The only way to tell if this has happened is by performing a compression check on the engine. Most PT cruisers will not experience any internal damage.

Is the Turbo PT Cruiser a good car?

Terrific cars when new and a fantastic packaging job, too bad it was clearly not designed to last between 150 and 200K which would have made all the difference. At that mileage target everything wearing out at the same time is more acceptable as a useful life.

When did I get my Black PT Cruiser?

04 PT Black Touring Turbo, inherited about 7 years ago when my father passed away. Had 40k when I got it and now has 47k. I had it body worked and painted had some small dings.

How often should the timing belt and water pump be replaced?

The cooling fan is electric and changed or checked every 60,000 or so. If either fails you will face huge repairs if you blow the motor. If it overheats; stop and get towed; don’t blow motor!!! The timing belt and water pump together are a scheduled replacement at 80,000 -100,000 or depending on age!!!

Are there any problems with the timing belt?

There were a number of problems in 2003 with timing belts failing on drivers. One of the big issues with this was that the check engine light would not necessarily come on to let you even know there was a problem with the timing belt.

How much does it cost to replace timing belt on Chrysler PT Cruiser?

The average cost for a Chrysler PT Cruiser timing belt replacement is between $747 and $908. Labor costs are estimated between $559 and $705 while parts are priced between $188 and $203.

What should I do if my PT Cruiser belt breaks?

My 2005 pt cruiser belt broke they replaced it but could not start engine was told that possible valve damage ended up getting head reconditioned total cost $5600 : ( 12 people found this helpful.

Why did my timing belt break on my PT Cruiser?

The timing belt is bad. This is a interference motor but do the valves bend all the time? … read more need to see what another mechanic says. PT Cruiser just died half way threw a 200mile trip. the coolant temp started to rise then either the brake, … read more Vocational, Technical or Tra…

How much does it cost to replace a water pump on a PT Cruiser?

The average cost for a Chrysler PT Cruiser water pump replacement is between $760 and $921. Labor costs are estimated between $616 and $777 while parts are priced at $144. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

When did the Chrysler PT Cruiser go out of production?

Subsequent to the demise of the Plymouth brand, the PT Cruiser was instead brought to market as part of the Chrysler range. By the end of production in July 2010, worldwide production had reached 1.35 million.

What are the problems with a 2007 PT Cruiser?

Unfortunately, engine lights that will not turn off seem to be a prevalent PT Cruiser problem. The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners.

When did the Chrysler PT Cruiser come out?

The PT Cruiser is a compact MPV that was manufactured by Chrysler between 2001 and 2010. If you need to replace the engine with a new or used PT Cruiser engine, you will find a range of engines for sale on eBay.

How big is the engine on a PT Cruiser?

The PT Cruiser was equipped with engines that ranged in size between 1.6L up to 2.4L. Each of these engines on both the gasoline and diesel side is four-cylinder designs that are paired with four or five-speed transmissions. Content provided for informational purposes only. eBay is not affiliated with or endorsed by Chrysler.

Are there any negatives to a 2002 PT Cruiser?

The two negatives are back seat size is quite small, even fir a medium / large pup & there is a definite blind spot on each side; however, one learns to drive safely even with the challenge. has every eminity possible. New Brakes, new battery, excellent tires

How does the OBD II system work on a Chrysler PT Cruiser?

The OBD II system will turn on the “Malfunction Indicator Light” icon if any of these systems require repair as it stores diagnostic codes and information: a tremendous assist to service technicians. It also provides many preprogrammed safety features which turns on and operates automatically.

Where are the Allen bolts on a Chrysler PT Cruiser?

Had to drop the alternator out to get to the bolt holding the dryer/accumulator to the fender well. The bolts holding the a/c line to the dryer/accumulator for some reason are behind the lines next to the firewall. Nice place Chrysler, couldn’t have put the allen bolts in front.

Do you need to change the timing belt?

I don’t see it mentioned in your post, but IMO while the area was torn apart, it would have been a good idea to change the center motor mount and with a new bolt, both cam seals and the crank seal, in addition to the other timing belt parts that you did.

How often do timing belts need to be replaced?

Most timing belts will need to be replaced as part of regular maintenance every 60,000 to 100,000 miles, and most related problems are caused by not replacing it when you’re supposed to. If the timing belt is starting to go bad, the engine will run poorly and the check engine light will likely come on.

What happens if you have a bad timing belt?

If your car or truck is showing signs of a bad timing belt, don’t drive it. Doing so can quickly result in complete engine failure. If the timing belt has already broken, the engine will not start. How often do timing belts need to be replaced? Timing belts are replaced as part of scheduled maintenance, usually every 60,000 to 100,000 miles.

Where are the teeth on the timing belt?

The teeth on the belt mesh with the crankshaft timing gear and camshaft timing gear. The belt is held tight by a tensioner to ensure the belt doesn’t skip a tooth, or “jump time.” The timing belt may turn an additional gear for the water pump.

What happens when the timing belt fails on a Chrysler PT Cruiser?

Some engines are called interference engines and the pistons will bend the valves when a timing belt fails. 26 people found this helpful. Yep. tenspeed is right on. The piston will come up on a compression or an exhaust stroke and hit a valve that is not supposed to be open.

When did I change the timing belt on my PT Cruiser?

When I got the car I asked my son-in-law (Mechanic for The Bus Company) to change all the fluids (trans, engine, coolant) and fan belts and radiator belts. This was 7 years ago. So now I felt the car is nearing 16 yrs old. Now the PCM when out, replace it with one from Mckyeee and he added the Mopar Stage 1 programming to it.

What kind of timing belt does Turbo PT Cruiser have?

PT is basically a PL (Neon) with the 2.4L. My first timing belt was a learning curve. After you learn the best tools and techniques for the job, it is much quicker and easier. My first one I had to take back apart because it was a tooth off.

How much does it cost to replace a water pump in a PT Cruiser?

Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Chrysler PT Cruiser Water Pump Replacement costs $914 on average. What is a water pump and how does it work?

Do you need to replace the timing belt on a water pump?

For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air.

How often do you change the oil on a PT Cruiser?

We have 6 PT Cruiser that are use for our installers, we change the oil every 4k miles, replace the transmission fluid every 50k miles and they are all running and getting close to 180k to 200k. No major problems, they are very good small vehicles.

When was the last Chrysler PT Cruiser made?

The PT Cruiser is a family vehicle that was discontinued in 2010. Read more Chrysler reviews to learn about other models.

When to re torquing a 2.4L cylinder head?

The previous bulletin should be removed from your files. This bulletin applies to vehicles equipped with a 2.4L engine built between February 1, 2004 and April 5, 2005. Whenever re-torquing the cylinder head bolt (s), be sure to follow the torque sequence as outlined below.

How to torque head bolts in Chrysler 2.4L?

3) Verify that each head bolt is at 60 Ft-lbs before performing next steps. 4) After all head bolts have been verified to be torqued to 60 Ft-lbs , follow the torque sequence and turn the head bolts an additional 90° (1/4 turn) (Fig. 1).

When did the 2.4L engine come out?

This information supersedes the previous technical bulletin, dated March 25, 2005. The previous bulletin should be removed from your files. This bulletin applies to vehicles equipped with a 2.4L engine built between February 1, 2004 and April 5, 2005.

How to replace timing belt on 2.4L PowerTech engine?

The following steps provide information on removal and replacement of the 2.4L I4 timing belt. 1. Remove the air cleaner upper cover, housing and clean air tube. 2. Raise the vehicle on a hoist. 3. Remove the accessory drive belts. 4. Remove the crankshaft vibration dampener.

How do you change timing belt on Jeep?

1. Remove the air cleaner upper cover, housing and clean air tube. 2. Raise the vehicle on a hoist. 3. Remove the accessory drive belts. 4. Remove the crankshaft vibration dampener. 5. Remove the air conditioner/generator belt tensioner and pulley assembly.

What kind of wrench do I need to change timing belt?

Install a 6 mm Allen wrench into the belt tensioner. Before rotating the tensioner, insert the long end of a 1/8” or 3 mm Allen wrench into the pinhole on the front of the tensioner. See Figure 2. While rotating the tensioner clockwise, push in lightly on the tool until it slides into the locking hole.

What do you need to know about the cambelt?

Get a quote. The cambelt, also known as the timing belt, is one of the most crucial bits of kit in the engine. It’s basically a rubber belt with teeth on it which synchronises the rotation of the crankshaft and the camshaft.

How often should a timing belt be replaced?

Manufacturers employ various schedules and measures for timing belt replacement, but the rule of thumb is 60,000 miles, or 5 years, whichever comes first. Is My Engine Safe If My Timing Belt Snaps?

Are there any recalls on the PT Cruiser?

2001 was one of the most problematic years with the PT Cruiser. This model year was subject to 7 recalls relating to things like the power steering, hose assembly, ball joint assemblies, fuel supply lines, and so on. In terms of engine issues there were several reports from drivers who experienced their timing belt breaking.

How do you remove drive belt on PT Cruiser?

Open the hood. Loosen the lock bolt with a ratchet and loosen the belt tensioner until the belt is loose enough to remove. The PT Cruiser uses multiple drive belts rather than a serpentine belt and therefore requires that each belt be removed separately with its own lock bolt and tensioner.

How do you replace a power steering belt?

Pull the power steering pump up and down repeatedly until the belt comes out without significant force. Install the new power steering belt onto the power steering pump pulley and crank pulley. Tighten the tensioner until the belt only has approximately a half an inch of deflection. To check, take a ruler and place it vertically against the belt.

What causes a PT Cruiser to have a CPS code?

Chrysler PT Cruiser P0340 Causes As stated above, the P0340 code is often caused by a failure in the Camshaft Position Sensor itself. Here are the most common causes: Wiring Issue – The Camshaft Position Sensor wiring is exposed to harsher conditions than a lot of the wiring in your PT Cruiser.

Why is my PT Cruiser not working properly?

Here are the most common causes: Wiring Issue – The Camshaft Position Sensor wiring is exposed to harsher conditions than a lot of the wiring in your PT Cruiser. It is worth looking at it to see if it has developed a short, or to see if the harness connector is loose or damaged.

How to replace the crank and camshaft position sensors?

Camshaft & crankshaft sensor locations 1 Disconnect the negative battery terminal. 2 Locate the sensor in question. The location will vary by engine and sensor type. 3 Remove any engine parts that may be blocking access, like plastic engine covers or the air intake tube. 4 Unplug the sensor electrical connector.

What is the position sensor on a PT Cruiser?

Shop AutoZone for Chrysler PT Cruiser Camshaft Position Sensor. 0.0 out of 5 stars. 0.0 out of 5 stars. 0.0 out of 5 stars. 0.0 out of 5 stars.

What does the timing belt do on an OHC engine?

The timing belt (or chain) is the sole component that keeps the camshaft (make that camshafts on a DOHC or V-type OHC engine) and crankshaft in sync.

How many horsepower does a PT Cruiser GT have?

In the PT Cruiser GT (215 hp 2003-2005; 230 hp and 245 lb.-ft. from 2006 onwards), 0-60 times came in the low-to-mid 7s, versus the lighter Neon’s 6s. It had forged C70-steel connecting rods supplied by Mahle.

Chrysler PT Cruiser Timing Belt Replacement at your home or office. Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Chrysler PT Cruiser Timing Belt Replacement costs $917 on average.

How much does a timing belt replacement cost?

Timing Belt Replacement Estimate for Chrysler PT Cruiser Chrysler PT Cruiser Timing Belt Replacement costs $890 on average.

How many miles does it take for timing belt to leak?

WB Motors spotted an aged head gasket leak and VERY IMPORTANTLY pointed out that at 80,000 miles the timing belt can go without symptoms and take the engine with it. The Cruiser had 82,000 miles on it and I did both repairs. Rust underneath is the current issue.

When to replace the water pump in a PT Cruiser?

If replacing the water pump, do so at this time, and of course drain the cooling system first. If the engine cooling system thermostat is only accessible with water pump replacement, the thermostat should be replaced as well.

When was the last time a PT Cruiser was made?

1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.

How much does it cost to fix a PT Cruiser engine stall?

The car this issue conflicts is the 2006 Chrysler PT Cruiser. Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving.

What’s the best way to fix a PT Cruiser?

The best solution is to have a professional car mechanic well versed in PT Cruiser problems. A tempory solution was to turn the car off and back on. But this only stopped the problem temporarily and quite often the problem would arise again upon the next time the owner drove the car.

How much does it cost to replace the timing belt on a PT Cruiser?

The cost of getting a timing belt replaced in your PT Cruiser is between $800 and $1,000 on average. The majority of that expense is labour cost because repairing a timing belt is one of the more complex jobs that you’re going to have to get done on your vehicle. The timing belt is not that easy to access and take some effort to get down into.

How much does it cost to replace timing belt on PT Cruiser?