How many horsepower does a Corvette LS1 have?

When introduced in the 1997 Corvette the LS1 was rated at 345 hp (257 kW) at 5,600 rpm and 350 lb⋅ft (475 N⋅m) at 4,400 rpm. After improvements to the intake and exhaust manifolds in 2001 the rating improved to 350 hp (261 kW) and 365 lb⋅ft (495 N⋅m). The LS1 was used in the Corvette from 97-04.

Are there any problems with the corvette head unit?

Check for proper installation or take your Corvette to whoever installed the head unit, if all is connected properly then the head unit was bad to begin with. If you are having inconsistent airflow issues, you could be experiencing out of sync blend door problems.

Where is the casting number for the LS6 intake manifold?

LS6 intake manifolds were also used on all 2001+ LS1/6 engines. The casting number, located on the top rear edge of the block, is 12561168. Applications: The 4.8 L and the 5.3 L are smaller truck versions of the LS1 and were designed to replace the 305 and the 350 in trucks.

What makes the LS small block engine so strong?

The architecture of the LS series makes for an extremely strong engine block with the aluminum engines being nearly as strong as the iron generation I and II engines. The LS engine also used coil-near-plug style ignition to replace the distributor setup of all previous small-block based engines.

The LS1 also changed the firing order to 1-8-7-2-6-5-4-3 which is aligned with more modern V8’s. When the LS1 was introduced in the C5 Corvette, it was rated at 345 hp (257 kW) at 5,600 rpm and 350 lb-ft (475 Nm) at 4,400 rpm.

When did the first 2003 Corvette come out?

2003 Corvette Overview The arrival of the 2003 Chevrolet Corvette represented the culmination of fifty years of evolution for General Motors flagship automobile. It had been during the spring of 1953 that the first Corvette had been unveiled at GM’s “ Motorama ”.

What kind of body does a 2003 Corvette have?

In fact, at its 50th anniversary, the 2003 Corvette continued to share its GRP (fiberglass) body panels and its front-engine, rear-wheel drive layout of the 1953 model. Without question, at fifty, Corvette continued to be the proud legacy of Harley Earl, who envisioned a two-seat roadster a half-century earlier.

What’s the difference between a 2003 Corvette and a Corvette Z06?

DID YOU KNOW: In an effort to meet stricter standards for occupant protection, the Z06 Corvette hardtop headliners were made thicker for the 2003 model year. Additionally, the interior area for the A-pillar of all models and the B-pillar in the Coupe/Z06 were modified.

What kind of car is the 2003 Corvette?

Available in either a two-door Convertible, a two-door Coupe or a two-door Hardtop (Z06), the 2003 Chevrolet Corvette fifth generation version gears up for its final production run (scheduled for 2003), with the C6 replacement version poised to take over.

When did the C5 Corvette go into retirement?

The 2003 Corvette Racing Teams at the 24 Hours of LeMans. Of course, by late 2003, everyone knew that the C5 Corvette was headed for retirement. The automotive press had already flooded the media with design rumors and spy photos of the replacement C6 Corvette.

How much does a used Chevy Corvette cost?

Used Chevrolet Corvette by Year Vehicle Deals Starting Price Total Available 2021 Chevrolet Corvette – $92,995 87 listings 2020 Chevrolet Corvette – $84,900 221 listings 2019 Chevrolet Corvette 32 Great Deals $40,895 383 listings 2018 Chevrolet Corvette 10 Great Deals $46,677 108 listings

How much does a 2004 Chevy Corvette cost?

Notes: Base Corvette Coupe with 346 cu. in. 350 hp engine and four speed automatic transmission: $44,535.00. Base Corvette Convertible with 346 cu. in. 350 hp engine and four speed automatic transmission: $51,535.00.

What kind of engine does a 2004 Corvette have?

To learn more about the 2004 Corvette, click here . Fill Cap Pressure Test Rating (Max.): Independent SLA (Sort Long Arm) forged aluminum upper and pressure-cast aluminum lower control arms; forged aluminum steering knuckle, transverse leaf spring and steel stabilizer bar, spindle offset.

What are the dimensions of a GM LS1 engine?

Other than the displacement (5.7L / 347.5ci), the aforementioned rod bearings and physical dimensions with previous generation LT1 small block, the LS1 was a new all-aluminum single-cam pushrod engine with a bore and stroke of 99 mm × 92 mm (3.898 in × 3.622 in) making this GM’s first all-aluminum production V8.

What are the specs of a 2004 corvette?

2004 Corvette Specs. Corvette’s fifth generation drew to an end with the 2004 Corvette. To mark the end of the C5 generation, GM introduced a special Commemorative Edition Corvette. This Corvette was designed to honor Corvette’s return to racing. The Commemorative Edition 2004 Corvettes featured LeMans Blue paint and Shale interior.

Where can I buy a 2004 Chevy Corvette?

Gateway Classic Cars of Orlando is proud to offer this sleek 2004 Chevrolet Corvette. This Vette has been well maintained throughout its life. This Chevy is ready to hit the road with its LS1 engin… More Info › 2004 Chevrolet Corvette Convertible.17,700 original miles. Every option available. Magnetic red paint. Oak Top and leather interior.

What kind of transmission does a 2004 Corvette have?

Transmission selections include a 6-speed manual or a 4-speed automatic. The 2004 Chevy Corvette boasts tons of power and a long list of standard equipment.

Are there any issues with the LS1 engine?

Although there are many “pros” for the LS1 engine, there are some common issues with the engine and are further exacerbated in motorsport environments.

What’s the firing order on a LS1 engine?

Furthermore, with the removal of the distributor, the ignition is now controlled by the ECU, firing a set of eight coils mounted near the spark plugs. The LS1 also changed the firing order to 1-8-7-2-6-5-4-3 which is aligned with more modern V8’s.

What kind of manifold does a LS1 engine use?

154.7mm (6.089-inch) powdered metal rods. Topping off the engine is a thermoplastic composite intake manifold intended to reduce weight and lower inlet air temperatures. Furthermore, with the removal of the distributor, the ignition is now controlled by the ECU, firing a set of eight coils mounted near the spark plugs.

What kind of engine does a Chevy Corvette have?

New for 2008. All-new LS3 6.2L V-8 engine for Coupe and Convertible: 430 hp (321 kW)*. 424 lb.-ft. of torque (575 Nm)*. 436 hp / 428 lb.-ft. (325 kW / 580 Nm)* with new, optional dual-mode exhaust system. High-flow cylinder heads. Enhanced valvetrain.

What’s the top speed of a 2008 corvette?

The exhaust adds another 6 hp and 4 lb-ft, but even better, it adds the kind of raucous, popping exhaust note — even on the automatic — that let’s everyone know you mean business. With all the mods, the top speed of the base Corvette gets up to 190 mph.

What is the exhaust system on a 2008 corvette?

Exhaust system – Optional on ’08 Coupe and Convertible models is a new, two-mode performance exhaust system. Similar in design and function to the system used on the Z06, the dual-mode exhaust uses vacuum-actuated outlet valves, which control engine noise during low-load operation, but open for maximum performance during high-load operation.

How much horsepower does a 2008 Corvette have?

The LS3 was introduced by Chevrolet as the standard powerplant for the 2008 (and later) Corvette . This new engine produced 430 horsepower (321 kW) at 5,900 rpm and 424 lb./ft (575 Nm) of torque (these numbers are SAE certified), both of which were appreciable gains over the outgoing LS2.

When was the LS engine introduced in the corvette?

The LS Engines LS1 Chevrolet began utilizing the LS1 engine in the Corvette when they introduced the C5 in 1997. When first introduced, the LS1 was rated at 345 horsepower (257W) at 5,600 rpm and 350 lb./ft. of torque (475 Nm) at 4,400 rpm.

Is it normal to run a corvette at 198 deg?

Yes this is normal, Your LS engine is a very tight tolerance engine. It requires synthetic oil(5W-30) so that it will return to the pan fast enough to keep the pick-up sump from going dry.The engine makes more power and gets better mileage at 198-220 deg. This is fine, it is meant to run at this temp.

How many horsepower does a Chevrolet LS7 have?

The LS7 was a 427.8 cubic inch (7,011 cc) 7.0 liter engine that was based on Chevrolet’s Gen IV engine architecture. The engine was rated with a peak output of 505 horsepower (377 kW) at 6,300 rpm and 470 lb./ft. of torque at 4,800 rpm. The engine featured a 7,000 rpm redline.