How do you reset the tire sensors on a GMC Sierra?
How do you reset the tire sensors on a GMC Sierra?
Uplevel Display
- Scroll down to the TIRE PRESSURE menu.
- Press and hold the thumbwheel button until the horn sounds twice to enter the relearn mode.
- Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
- A horn chirp will confirm that the sensor has been reset.
How to fix the lock icon on the dashboard?
Try this: Turn key to ON. Disconnect negative battery cable for about one minute. Take key out, lock doors and close them. Reconnect cable. Start truck. BTW, you will lose any radio presets with this. I have the same error on my dashboard …work truck.
Is the tire pressure monitor standard on 2007 Chevy Silverado?
Chevrolet got a head start in vehicle safety, as its 2007 Chevrolet Silverado came standard with a tire pressure monitoring system. In the following model year, the National Highway Traffic Safety Administration passed a law requiring manufacturers to fit TPMS on all of their passenger vehicles.
What causes a GMC truck to go into theft mode?
The passlock sensor and/or lock cylinder are defective or worn out causing the truck to enter a theft mode (starts, then immediately stalls approximately 2 seconds later). There are a number of ways to fix this, but most common/ secure way is to replace the defective components.
Try this: Turn key to ON. Disconnect negative battery cable for about one minute. Take key out, lock doors and close them. Reconnect cable. Start truck. BTW, you will lose any radio presets with this. I have the same error on my dashboard …work truck.
Chevrolet got a head start in vehicle safety, as its 2007 Chevrolet Silverado came standard with a tire pressure monitoring system. In the following model year, the National Highway Traffic Safety Administration passed a law requiring manufacturers to fit TPMS on all of their passenger vehicles.
The passlock sensor and/or lock cylinder are defective or worn out causing the truck to enter a theft mode (starts, then immediately stalls approximately 2 seconds later). There are a number of ways to fix this, but most common/ secure way is to replace the defective components.
