Why are the power windows on my Chevy Tahoe not working?

The two rear power windows on my 2000 chevy Tahoe developed internal intermittent shorts at the exact same time. I have also experienced trouble with the two front power windows not working at times. The dealership stated they have seen prior problems with the power windows in the Tahoe’s.

Are there any defects in my Chevy Tahoe?

The driver and front passenger windows have defects. The consumer heard a popping noise when rolling the window down, and then the window would not go up or down. The window on the passenger side is half way. The driver side has been repaired.

Why is the power window on my car not working?

The problem lies in the window regulator. If you’re seeing the toggling voltage, the problem is in the window regulator. It’s either a bad motor or a broken regulator that’s causing the motor to stall. Reconnect the electrical connector to the motor and try operating the window.

What does it mean when a window won’t go down?

First off, is it only one window that won’t go down? If so, it might be a single connection, switch, or motor that’s not working. If all power windows aren’t working, then it might be a fuse or relay. Check the fuse box that contains the power window fuse and see if the fuse or relay is intact.

Is the front window lock on a Chevy Tahoe working?

You need to verify that the switch is getting power, or not. This may ultimately end up being a bad BCM Body control module, but I’d have the dealership confirm that before replacing as those are non-returnable and expensive. Yes the front passenger, rear drivers & Passenger windows/locks etc all work. Its only the drivers side.

Why is my front door power window not working?

Both front door power windows fail to operate. The motors make a grinding noise and the windows will not fully open or close. The glass panels apparently are not attached as they can be moved by hand. The failures have occurred within two days of each other and have been vary rarely been opened since the vehicle was purchased.

Are there any problems with the Chevy Tahoe?

See all problems of the 2003 Chevrolet Tahoe . The driver and front passenger windows have defects. The consumer heard a popping noise when rolling the window down, and then the window would not go up or down. The window on the passenger side is half way. The driver side has been repaired.

What causes one power window to stop working?

Only one window stops working If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

What are the symptoms of a bad power window switch?

If you suspect your power window switch is going bad or failing, watch for the following symptoms: 1. All the windows quit working If all of the windows quit working at once, meaning there is no response when you push the power window switch, chances are there is a loss of power in the electrical system.

Are there any problems with the power window on a Chevy Tahoe?

Chevrolet Tahoe owners have reported 23 problems related to power window (under the visibility category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Chevrolet Tahoe based on all problems reported for the Tahoe.

How to fix a slow and dragging power window?

Brian Eslick from How to Automotive http://www.howtoautomotive.com/ takes you step-by-step through the process of fixing a slow and dragging power window on your car or truck. You will need Blaster’s Silicone Spray to lube the window tracks on your car or truck.

What causes a power window to not go down?

There are a number of things that could be causing a malfunction of your power window. First off, is it only one window that won’t go down? If so, it might be a single connection, switch, or motor that’s not working. If all power windows aren’t working, then it might be a fuse or relay.

Why are my Silverado windows not going down?

I purchased a 1991 Silverado for my son and the windows worked fine for a month and then they started to stop and go at times. I replaced the switches and checked the relay and all were fine. I then took the panel apart and it looks like the previous owner made speaker holes in them and damaged some of the wires in the process.

Why is my power window switch not working?

If the connector is fine, it may be the switch. Moisture is tricky and can sneak inside the switch and the connector if outside elements manage to get in the door panel. Replacing a window switch is a pretty easy repair. You’ll just have to pry the switch panel up from the arm rest using a trim tool and then unplug the wiring connector.

How can I tell if my power windows are working?

Simply pry up the switch, turn the vehicle on, and probe into the power wires entering the switch connector. If the light brightens or the meter reads the right voltage (usually 12v), then you know there is power going to the switch. Then test the wires leaving the switch.

What causes a power window to not work?

When you have a power window not working condition, most DIYers automatically suspect a bad power window motor. That’s usually not the case. If you have a power window not working issue, the fault is usually a broken window regulator, bad window switch, or a problem in the power window wiring. Passenger window not working