When did the 700R4 lock up converter come out?
When did the 700R4 lock up converter come out?
After many, many discussions, we came to an agreement. 700r4 from a 1993 or earlier (post ’93s required electronics to function) 2500rpm stall, no lockup, the shiftworks shifter mod kit and Bow Tie Overdrive’s TV Made EZ cable.
How big is a 700R4 torque converter clutch?
Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch torque converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM.
Is the 4th gear clutch locked on a 700R4?
The 4th gear clutch in a TH700r4 gets some of it’s lube from the torque converter lock-up oil circuit. If you don’t use a kit to make sure that the converter is locked when the trans hits 4th gear you’ll burn the cluth out eventually!
When does lock up converter disengage on Camaro 700R4?
Lock up converters generally engage once the transmission has shifted into 3rd or 4th gear. The disengage when you force a downshift and when you apply the brake (to prevent engine stalling). As far as the “locked kits” all I can figure is this.
How do you lock up a 700R4 transmission converter?
1. Remove the 4th gear pressure port plug with a 9/16″ wrench. 2. Apply Teflon pipe tape to the threads of the brass fittings in a clockwise direction. 3. Tighten the 90 Elbow into the 1/8″ to 1/4″ adapter. 4. Then thread them both into the port. DO NOT OVERTIGHTEN! (Fig. 2) Typical kit contents: (A) Transmission converter lock-up plug
How to install an external lockup kit on a 700R4?
1. Connect the transmission connector plug to the transmission plug on the driver side and be sure it is plugged in securely. 2. Apply a 12V+ voltage to the loose pigtail of the connector plug. 3. (A)You should see a small spark when connecting and you will hear a faint “click” inside the transmission.
Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch torque converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM.
How big is the Raptor lock up torque converter?
Power Raptor Lock-up torque converter 700r4 2004r. Fits 700R4, 200-4R and non-LS1 4L60E transmissions. This is a 10 inch torque converter with a 12 inch lock-up carbon fiber clutch rated up to 700 horse power. Can be ordered in stall speeds of 2000 to 4000 RPM.
