Common questions

What to do if left side electric window does not work?

What to do if left side electric window does not work?

Connect a test light between battery voltage and master switch assembly connector C1 terminal “M” (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 6. 4. Connect master switch assembly connectors C1 and C2. Disconnect left power window motor connector.

What to do if left front window motor does not work?

Observe test light while operating left front window switch on master switch assembly to UP and DOWN positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, go to step 7. 5. Replace left power window motor.

Why is my drivers side window not working?

Here is a guide and some wiring and fuse diagrams (Below) that will help you get the job done. There could be a fault with the green wire (power to motor/switch) between the fuse box and switch/motor or the ground is bad. Perform a continuity test (with no power in circuit) on both the power and ground wires. Please let us know what happens.

What should I do if my car window won’t roll up?

A quick way to determine if the problem is electrical or mechanical is to push the switch up and down and listen closely. If you can hear the motor making a noise, the problem is probably a mechanical problem. If this is the case, chances are it’s the window regulator. Most power windows use a cable or plastic strap to drive the window up and down.

Why is my passenger side power window not working?

When I press the button to roll down the window, I notice that there is a clicking sound coming from under the dash/steering wheel column area but the window does not work. The passenger window does work fine. Could the problem be a fuse or something electrical?

Why do my windows roll down but not up?

I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window. My driver door also has an issue with unlocking and locking the door, not sure it’s related or not.

Why is my elictric window not going down?

A great deal of the time, the motor is not the problem. No sense tearing the door all apart to change the window motor if you don’t have to. It can be difficult. If more than one window is giving you trouble, the problem is most likely in the switch and wires.

What kind of truck has windows that roll down but not up?

The Chevrolet Silverado is a line of trucks under the Chevrolet brand and manufactured by General Motors. Mechanically, the GMC Sierra and Chevrolet Silverado are identical. I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window.

How to fix a bad electric window switch?

Attach the multimeter to the wires, then activate the window switch with the car’s key in the on position. If you are getting power in both directions of the switch, then the electrical wiring to the motor is good, and the motor should be replaced.

How to fix power window since it can go down but?

Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down. Any other suggestions? Was this answer helpful?

Why are my rear power windows not working?

The only thing that breaks the path from the master window switch to the rear windows is the window switch on each door. The ground for the motor is through the main switch in the master window switch but if the R/F window is working, its not a ground issue.

Connect a test light between battery voltage and master switch assembly connector C1 terminal “M” (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 6. 4. Connect master switch assembly connectors C1 and C2. Disconnect left power window motor connector.

Attach the multimeter to the wires, then activate the window switch with the car’s key in the on position. If you are getting power in both directions of the switch, then the electrical wiring to the motor is good, and the motor should be replaced.

Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down. Any other suggestions? Was this answer helpful?

The only thing that breaks the path from the master window switch to the rear windows is the window switch on each door. The ground for the motor is through the main switch in the master window switch but if the R/F window is working, its not a ground issue.

The Chevrolet Silverado is a line of trucks under the Chevrolet brand and manufactured by General Motors. Mechanically, the GMC Sierra and Chevrolet Silverado are identical. I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window.

Why is the driver side window on my Silverado not working?

My son borrowed my 2001 Silverado yesterday and the driver’s side window got stuck about 3/4 of the way down. He says he hears the motor, but it won’t move. He got it up further for now but believes it’s off the track, if that’s possible. As soon as I get it back I’ll take the door panel off to see what’s going on.

What causes a GMC power window to move?

The passenger side switch is the probable cause. The driver’s side switch uses the relays in the passenger switch to operate the window and if this is defective a good driver’s side switch will not cause the window to move. Replacing the passenger side switch should fix the problem.

Is the power window on the passenger side?

Power window works on driver side but not on passenger side power window works on driver side but not on passenger side replaced motor still doesn’t work all 3 window switch are the same and work on drivers side …

Why is my driver side power window not working?

The regulator doesn’t make any noise, the window doesn’t move, nothing. The switch for the passenger window does work though, as well as the power locks and power mirror adjusters, so I know the door has power. I thought this was the sign of a dead regulator, so I replaced that.

Author Image
Ruth Doyle