What are the problems with a 2003 Ford Ranger?
What are the problems with a 2003 Ford Ranger?
1 Shifting Problems 2003 Ranger Average Cost to Fix: $1,200 Average Mileage: 85,000 mi 2 Loss Of Acceleration 2003 Ranger Average Cost to Fix: $3,500 Average Mileage: 103,000 mi 3 Wheel Bearings Come Loose 2003 Ranger
Is there a problem with the automatic transmission on a Ford Ranger?
2001 Ford Ranger–automatic transmission, remove ignition key and it can easily be taken out of park. Key in ignition with engine running, I no longer have to press the brake to get into any gear. I have experienced this same problem in February 2003 when it was repaired by local Ford dealer.
What was the problem with my Ford Ranger XLT?
On or about 8/1/05 I parked my 2000 Ford Ranger XLT in my driveway and got out to open the gated parking space at my residence. Vehicle jumped into reverse and backed into the street. Managed to stop it but injured my knee. Found pin from shifter mechanism on the floor under steering column that had fallen out of shifter.
What kind of bed does a 2003 Ford Ranger have?
Two bed styles are available: Styleside or Flareside. For 2003, Ford will offer XL, Edge, Tremor or XLT trims. XL and XLT are your basic models. XL is really basic; only by going with XLT can you get chrome exterior trim, chrome wheels, carpet with front floor mats, a CD player and air conditioning as standard equipment.
What kind of truck is a 2003 Ford Ranger?
Amazing truck!!! I am on my second Ranger now. 2003 Ford Ranger Edge 4.0L V6 manual. my old one was a 2003 Ford Ranger XLT Automatic with a 3.0L V6. Neither of them have ever have any problems. I would recommend a Ranger to anyone unsure of what small size pick up they should get. Alot of room in the cab, a good bit of room in the bed.
When did the Ford Ranger get a V6?
The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger
What kind of sound system does a 2003 Ford Ranger have?
The 2002 Tremor package, with its ear-splitting 485-watt sound system, returns for 2003 as a trim level, joining XL, Edge and XLT in the lineup. A chrome appearance package for select XLT models is available, and last year’s FX4 package for four-wheel-drive Rangers is offered in two guises: Off Road and Level II.
Where does the Ford Ranger engine come from?
The Vulcan was a clean-sheet design using the metric system. The engine block is built by Sherwood Metal Products, the intake comes from Ford’s Essex Casting, and the engine is assembled at Ford’s Lima Engine plant in Lima, Ohio. The Vulcan is a straightforward pushrod design, with 2 valves per cylinder. Bore is 3.504 in and stroke is 3.15 in.
Where does the noise come from on a Ford Ranger?
A clicking / electrical noise coming from behind dash. Intermitent noise coming from behind dash from area left of display panel. Sometimes stops when you open drivers door or turn ignition off then back on. Mine does the same ans so does my buisness partners. Its actuator that controls a vent. Behind the glove box. There are more than one.
What happens when I put my Ford Ranger in reverse?
When I put my Ranger in reverse, there should be a beep to inform me that the sensors are active. This should then be followed by a beeping sound as I get closer to an object. Once close, intermittent sound should become permanent. This is not the case, when reverse is elected, sound is constant.
Why does Ford Ranger 2.2tdci not start?
Ford ranger 2.2tdci not starting after replacing turbocharger. I reset After replacing the turbocharger, it cranks but not start. I reset timing but it just don’t start.
When does Ford Ranger engine hesitate during acceleration?
Ford Ranger Engine hesitates during acceleration Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Ford Ranger Engine hesitates during acceleration Inspection costs $89 on average.
What kind of car is a 2003 Ford Ranger?
Consumer Ratings Rank Vehicles HP #2 2004 Ford F150 (Heritage) Regular Cab 231 #3 2004 Ford F150 Regular Cab 231 #4 2003 Ford Explorer Sport Trac 210 #8 2003 Ford Ranger Regular Cab 143
What’s the price of a Ford Ranger engine?
Ford Ranger Engine hesitates during acceleration Inspection costs $89 on average. It can be frustrating for any driver to expect certain acceleration from their vehicle only to find that the vehicle seems to be hesitant while speeding up.
The most common transmission issues in the 2003 Ford Ranger deal with the O/D light flashing, shifting concerns, and the transmission lines rusting through after minimal use. The main shifting problems are due to various issues, like dirty or low fluid, a problematic engine, damaged clutches, or valve body failure.
What’s the problem with the Ford Ranger manual gearbox?
There’s nothing wrong with the six-speed manual gearbox itself, but a few owners have found out the hard way about the standard dual-mass flywheel (DMF). The DMF is an engineering solution for the vibrations and driveline shunt inherent in a lot of modern engines that produce big Newton-metre at grumbly-low engine revs.
Why does my Ford Ranger have water problem?
Now, if you’re unlucky enough to combine that work ethic with a tankful of fuel that is even slightly contaminated with water (or anything else, but water’s the biggie) you’ll soon have dramas. Because water doesn’t lubricate like diesel does, any H 2 O going through the high-pressure pump will make a mess of it internally.
What causes the head gasket on a Ford Ranger to blow?
The problem is that the cooler can split, leading to a loss of coolant from the radiator. In turn, that can cause the engine to overheat and the head gasket to blow.
What causes a 2003 Ford Ranger to stop?
Antilock system (ABS), parking brake, master cylinder, calipers, rotors, pulsation or vibration, squeaking, brake failure or wear. “Sensor failing on right front wheel. Causes the front right brake to release sometimes, resulting in severely increased stopping distance and pulling the car to the left.
How many times has the Ford Ranger been recalled?
The 2003 Ford Ranger has been recalled 5 times by NHTSA. View Recalls Reliability indicates how models have performed in the past, providing the basis for predicting how the vehicles will hold up in the year ahead.
What do you need to know about Ford Ranger reliability?
The Reliability score is based on our latest subscriber survey of 2003 Ford Ranger owners. The owner comments describe problems respondents experienced with this vehicle. Antilock system (ABS), parking brake, master cylinder, calipers, rotors, pulsation or vibration, squeaking, brake failure or wear.
How big is the axle on a Ford Ranger?
Another way to identify the axle in a Ford Ranger is from the Federal Compliance Sticker in the door jamb. If you look at the ‘AXLE’ section on the label above, you’ll see that this Ranger has a ‘F7’ axle code. Using the chart below, we know that this axle is a 7.5-Inch axle with a 4.10 limited slip.
How many horsepower does a Ford Ranger have?
With three powertrains available, offering up to 213 PS of horsepower and 500 Nm of torque, you’re guaranteed to find the one for you. With an advanced new 10-speed automatic transmission, the Ford Ranger delivers rewarding acceleration as well as outstanding fuel efficiency.
How big is a Ford Ranger pick up truck?
The pickup has a carrying capacity of 1 tonne and can tow up to 3,500kg. It has a ground clearance of 237mm and effortlessly wades through water up to 800mm deep. In fact, every aspect of the award-winning vehicle has been precision engineered for versatility, reliability and capability. We don’t mean to brag.
When did the Ford Ranger become its own line?
The path for the Ranger to become its own line instead of a trim package in the F-Series started in the ‘80s. When Ford introduced the F-150, it quickly took over the F-100’s sales, making the two pickup trucks redundant. Anyone who wanted an F-100 was happy to upgrade to the F-150.
What kind of speedometer did a Ranger have?
Depending on the year of your Ranger, it could have either a mechanical or electronic speedometer. The early Rangers could be found with just a cable that ran from the speedometer on one end and had a gear on the other that went in to the transmission tailhousing or transfer case.
How big is the bed of a Ford Ranger?
During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style. The Ford Ranger SuperCab was created with an extended cab body-style, and the SuperCab boasted a 6-ft bed with a 125-inch wheelbase.
When did the Ford Ranger Super Cab come out?
There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.
When did the Ford Ranger 4 wheel drive come out?
However, a four-wheeled drive version of the Ford Ranger was released in the autumn of 1982. The Ford Ranger was designed using inspiration from other truck models by Ford. Ford Rangers were manufactured with similar grille designs as trucks within the Ford F-Series, which are predecessors to the Ford Ranger.
What to do if your Ford Ranger starts hard?
Run the negative between the block and battery. Then connect the positive up, and touch it to the starter side of the solenoid. If you are jumping it correctly and nothing is happening check to make sure your starter is tight,and the mating surface between the starter and block are clean. I have seen oil leaks make for a hard start some times.
What kind of engine does Ford Ranger have?
Truck has 2.9 Liter v6, fuel injected. Turns over freely. Eventually starts after maybe 60 seconds, some jockeying the acelerator. Replaced fuel filter. 92 K miles on vehicle.
Why does my Ford 4.0L explorer not start?
So, when your Ford 4.0L Explorer (Aerostar, Ranger or Mountaineer) Cranks but Does Not Start, it’s because one of these components is missing from the mix.
1 Shifting Problems 2003 Ranger Average Cost to Fix: $1,200 Average Mileage: 85,000 mi 2 Loss Of Acceleration 2003 Ranger Average Cost to Fix: $3,500 Average Mileage: 103,000 mi 3 Wheel Bearings Come Loose 2003 Ranger
Why does my 1991 Ford Ranger not start?
I have a 1991 Ford Ranger, 4 cylinder, manual transmission. It will not start. When key is turned, it will click one time. It did this a month ago. Put in new battery, had starter tested at Autozone. Starter was ok. After putting starter back in, I jumped the solonoid and it started. Then it started every time until now. Now it has quit again.
How many complaints have been made about the Ford Ranger?
Ranger owners have made 733 complaints over 29 model years. Using our PainRank ™ system we’ve ranked it 22nd in overall reliability out of 42 Ford models, with some engine and transmission concerns. A list of some of the most common issues Ranger owners have to deal with.
Are there any recalls on 2007 Ford Ranger?
Another Nevada owner had similar experiences that started at 30,000 miles. There are also problems with the 2007 Ford Rangers. There are three recalls and 308 complaints centered around transmission and shifting issues along with steering problems.
What kind of engine does a Ford Ranger have?
It may not have all the bells and whistles the other two offer, but it’s faster and smoother. Unlike some of its peers, it offers automated emergency braking and forward collision warning as standard. The XL model comes with a turbocharged 2.3-liter four-cylinder engine that puts out 270 hp and 310 lb-ft of torque.
What kind of truck is a Ford Ranger?
I got a 2003 ford ranger with 100,000 miles. V6 3.0L with running issues. The truck will drive at lower speeds (45 and below) just fine. When you go to pass someone, get on the interstate or just floor the pedal it bucks and cuts out like its cutting the fuel. I changed the fuel filter hopeing for the obvious but not luck.
of the 2003 Ford Ranger. Base trim shown. Body Type: Truck See similar vehicles. Combined MPG: 17-26 Combined MPG. Engine: 143-hp, 2.3-liter I-4 (regular gas) Drivetrain: 4×2. Towing Capacity: 2,240 lbs.
What kind of rating does the Ford Ranger get?
The Ranger received the following grades on a scale of A-F.* * This score may not apply to all trims, especially for vehicles with multiple body styles that affect the space and design of the seating. What is a Bumper-to-Bumper warranty?
Is the 1993 Ford Ranger available for sale?
There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats. The Ranger received the following grades on a scale of A-F.*
Ranger’s base-level four-cylinder engine is supplemented by two optional V6s. Five-speed manual and five-speed automatic ($1000) transmissions are offered with all three engines. The 2.3-liter inline-four breathes with dual overhead cams and four valves per cylinder.
How many cabs does a Ford Ranger have?
Ford Ranger comes in a wide range of configurations: three trim levels, three cab configurations, three wheelbase lengths, three engine, a choice of transmissions, and is available with two-wheel drive or four-wheel drive. Buyers can also choose six- or seven-foot beds, and flat Styleside or notched Flareside fender shapes.
When did the Ford Ranger XLT come out?
Nearly a third of all compact pickups sold are Rangers. More than 5 million Rangers have been built since the first one rolled out in 1982. For 2003, Ford has improved and refined the Ranger with better brakes, new interior fabrics, and more extensive sound insulation.
The 2002 Tremor package, with its ear-splitting 485-watt sound system, returns for 2003 as a trim level, joining XL, Edge and XLT in the lineup. A chrome appearance package for select XLT models is available, and last year’s FX4 package for four-wheel-drive Rangers is offered in two guises: Off Road and Level II.
When did the Ford Ranger 2 come out?
The Ranger 2 model is a Pick Up car manufactured by Ford, with 4 doors and 5 seats, sold new from year 2003 until 2007, and available after that as a used car. Indirect Injection. Torsion bar. Beam axle. What engine is in Ford Ranger 2 Super Cab 2.5TDi?
What’s the name of the 2003 Ford Ranger?
Ford’s popular compact pickup receives a number of minor changes for 2003. The 2002 Tremor package, with its ear-splitting 485-watt sound system, returns for 2003 as a trim level, joining XL, Edge and XLT in the lineup.
What kind of paint does a 2003 Ford Ranger get?
New Sonic Blue paint is unique to FX4 Level II Rangers. Other changes to the 2003 Ford Ranger include covered visor vanity mirrors for XLT models, standard step bars on XLT 4WD SuperCab and Edge 4WD models and minor interior trim and fabric revisions on some models. Finally, crew cab rear seats get LATCH anchors, and some new colors are available.
What kind of transmission does a Ford Ranger GT have?
The GT was equipped with the Cologne V6 married to a five-speed manual transmission or A4LD automatic transmission. Other Ford Ranger accessories such as bucket seats, sway bars, and aluminum wheels rounded out the GT package.
What causes a Ford Ranger to not start?
There are two major kinds of starting problems with a Ford Ranger: it won’t crank, or it won’t start. If it won’t start, the possible problems are a failed fuel pump or a failed crank position sensor. If it won’t crank, the issues could be a failed starter motor, a failed neutral safety switch, a failed ignition or a locked-up engine.
What kind of problem does a 1985 Ford Ranger have?
1985 Ranger V6, 2brl carb, manual trans. has a chronic problem of stalling during slow down at turns and intersections. It will start right back up. It runs great except for the stalling and it burns a little oil.
When does the theft light go out on a Ford Ranger?
Btw, the theft light is supposed to blink every 2 seconds when key is out (as deterrent to thieves) , and should go out after it starts or in the start position longer than 2 seconds. My light would blink with the key out, but when I was in the start position it would stay on solid. I could crank my engine (ree-ree-ree-ree) but it would not start.
What does it mean when your Ford Ranger wont accelerate?
If your Ranger won’t accelerate, but the RPM’s do not change, that is an indication that there is an issue with creating power. The issue is going to be something affecting the motor. Here are some common issues that can affect the motor:
Btw, the theft light is supposed to blink every 2 seconds when key is out (as deterrent to thieves) , and should go out after it starts or in the start position longer than 2 seconds. My light would blink with the key out, but when I was in the start position it would stay on solid. I could crank my engine (ree-ree-ree-ree) but it would not start.
What is the Ford Ranger Anti theft system reset procedure?
Once it blinks start the engine and the vehicle will now be reset. If the engine does not start then You did not turn the key on and off quickly enough. The car is not starting. Flashing red light key shows that it is locked. How can we solve this? How to disconnect the slarm system.?
Are there any problems with the Ford Ranger 4×4?
Problems with Ford Rangers can arise with either the low or high 4X4 system or the automatic or manual hubs. If you are having problems with your 4X4, follow these steps to diagnose the trouble.
What to do if your Ford Ranger has a strange gear change slip?
If you therefor experience this strange gear change slip, then you need to address this issue by bringing your Ford Ranger to a reputable service centre, such as SAC, for a thorough inspection.
Why is the transfer case on my Ford Ranger not working?
The problem is usually caused by lack of battery maintenance or defective battery terminals. To prevent premature failure of your 4X4 Transfer Case Control Module, you may want to start by keeping your battery clean and terminals free of corrosion. Watch video below on Battery Care and Maintenance Tips by EricTheCarGuy
Why is my 4WD not working on my Ford Ranger?
Poor ground problems causes the alternator to work harder at supplying current to the 4WD control module – consequently, destroyng the 4X4 ECM. In many cases, Ford owners will declare that a defective battery is causing the problem, this is certainly possible however in most cases this is not the source of the problem.
The problem is usually caused by lack of battery maintenance or defective battery terminals. To prevent premature failure of your 4X4 Transfer Case Control Module, you may want to start by keeping your battery clean and terminals free of corrosion. Watch video below on Battery Care and Maintenance Tips by EricTheCarGuy
Why does my Ford Ranger crank no start?
In this video we cover some basics on finding the cause for a crank no start on a Ford Ranger. Many Ford vehicles have the same ignition and fuel design. I eventually trace the issue to a defective inertia switch, causing an electrical issue not allowing the fuel pump to run. Thanks for watching!
Why is the Check Engine light on on my 2002 Ford Ranger?
My 2002 Ranger was doing the same thing. I attached a code reader to the computer under the steering column and it was able to diagnose the problem as well as its general location. Turned out one particular cylinder (#4) was running LEAN which its cause could be anything from a bad spark plug, to a vacuum or air intake leak, to a timing issue.
What makes the over drive off light flash on a Ford Ranger?
I have a 2003 ford ranger, it’s on it 3 automatic transmission. Each transmission has had the same problem. The OVER DRIVE OFF light starts to flash, and when it shifts from 1st gear into second it shifts really hard, and shifts hard from 2nd to 3rd.
What kind of transmission does a Ford Ranger have?
I have a 2003 ford ranger, it's on it 3 automatic transmission. Each transmission has had the same problem. The OVER DRIVE OFF light starts to flash, and when it shifts from 1st gear into second it shifts really hard,… I have a 2003 ford ranger, it’s on it 3 automatic transmission. Each transmission has had the same problem.
The most common transmission issues in the 2003 Ford Ranger deal with the O/D light flashing, shifting concerns, and the transmission lines rusting through after minimal use. The main shifting problems are due to various issues, like dirty or low fluid, a problematic engine, damaged clutches, or valve body failure.
What causes a flashing check engine light on a Ford Ranger?
While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Ranger’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .
I have a 2003 ford ranger, it’s on it 3 automatic transmission. Each transmission has had the same problem. The OVER DRIVE OFF light starts to flash, and when it shifts from 1st gear into second it shifts really hard,… I have a 2003 ford ranger, it’s on it 3 automatic transmission. Each transmission has had the same problem.
What does trouble code mean on Ford Ranger?
Hook up a scan tool and retrieve the DTCs (Diagnostic Trouble Codes) and go from there. Be aware that a trouble code doesn’t necessarily mean that a component is bad except in a few cases.
What is the code for Ford diagnostic trouble?
Refer to our Generic OBD II code list for definitions on all other Ford diagnostic trouble codes. P1000 OBD System Readiness Test Not Complete P1001 KOER Test Cannot Be Completed P1039 Vehicle Speed Signal Missing or Improper P1051 Brake Switch Signal Missing or Improper P1100 Mass Air Flow Sensor Intermittent
Where can I find Ford color code charts?
These color code charts are every year from 1930 to 2018 (19 and 20 will come soon). Click on any of the photos and it will pop up and you can scroll through them. You can also hit ✲Ctrl + F (hit the control button then hit the f button) and a search button will pop up.
What is the trouble code on a Ford Ranger?
One of the most common trouble codes with the Ford Ranger is the P0455 code. This trouble code references a number that is given to you when you plug your Ranger into a OBD2 scanner, and has to do with the emissions system. P0455 Indicates that there is a large leak in the evaporative emission control system (EVAP).
What causes the p0303 trouble code on a Ford Ranger?
There are quite a few things that can cause the P0303 trouble code to trigger the Ford Ranger . Here are the most common problems that will throw the code. They are presented somewhat in order from most to least likely to be causing the code: Bad Spark Plugs – Spark plugs are one of the most common causes of P0303.
What causes Ford Ranger to get a p0455 trouble code?
There are many things that can cause the P0455 trouble code to trigger in your Ford Ranger. Here are the most common problems that will throw the code: Evap System Hose – The hose that carries the fuel vapor from the fuel tank to the intake manifold can begin to leak.
Properly equipped, a 4.0-liter Ranger can tow up to 5,750 pounds. It’s available on all crew cab styles except for the Tremor, and only on the XL trim if you opt for the regular cab cabs. Four-cylinder and 3.0-liter V6 engines can be mated to either a five-speed manual or a five-speed automatic transmission.
The Toyo Koygo seems to be the more common of the Ranger / Bronco II manual transmissions. The Mitsubishi has a bottom cover, a Mazda does not. Toyo-Koygo’s are more likely to be found in 4-cylinder 4×4 Rangers. Bronco II’s are more likely to be Mitsubishi FM145’s
Is the Ford Ranger a manual or stick shift?
You would, however, be wrong. All Rangers come with an automatic transmission as the only option. While older model Rangers presented manual capabilities, moving forward, Ford will be moving away from stick shift availability. Add a comment… Instagram Some reviews described the launch of last year’s Ford Ranger with lackluster performance.
Is the Ford Ranger m50d-r4 a manual transmission?
There is some confusion about these two transmissions and some believe they are one in the same. The M50D-R4 is said to bear no resemblance to the M50D-R1. The new model has a detachable bellhousing, a main case and extension housing, all made of aluminum.
The Reliability score is based on our latest subscriber survey of 2003 Ford Ranger owners. The owner comments describe problems respondents experienced with this vehicle. Antilock system (ABS), parking brake, master cylinder, calipers, rotors, pulsation or vibration, squeaking, brake failure or wear.
The 2003 Ford Ranger has been recalled 5 times by NHTSA. View Recalls Reliability indicates how models have performed in the past, providing the basis for predicting how the vehicles will hold up in the year ahead.
Why does my Ford Ranger 4×4 stop running?
If the LED lights flashed, then stopped after four or five times, the module is functioning properly and you will need to check other parts such as the shift motor, magnetic clutch, wiring harness and 4X4 switch to determine the cause of the problem.
When did the Ford Ranger 4×4 come out?
by Michelle Kerns. Ford Ranger 4X4s have been popular with truck owners since they were first introduced by the Ford Motor Co. in the mid-1960s. Problems with Ford Rangers can arise with either the low or high 4X4 system or the automatic or manual hubs. If you are having problems with your 4X4, follow these steps to diagnose the trouble.
How can I Shift my Ford Ranger to 4×4 high?
Determine if the 4X4 system can be shifted to 4X4 high by pressing the 4X4 button. The dash and 4X4 buttons should light up. If they do not, one of the following is faulty: the dash button, the 4X4 module or the shift motor. To determine which of these three is malfunctioning, have your friend sit near the module.
What are the issues with a 2003 Ford Ranger?
Issues I have had are, idler pulley had to be replaced twice during the warranty period. 6pk CD player quit working after 5yrs. Pass window window began working intermittenly 6yrs ago, seems to be related to the temperature outside, works when cold out and not when hot.
How can I tell if my Ford Ranger 4×4 is malfunctioning?
To determine which of these three is malfunctioning, have your friend sit near the module. Press the 4X4 button and ask your friend to listen for the sound of the relays in the 4X4 module. If the relays can be heard, the problem with the 4X4 lies in the 4X4 module computer or the shift motor.
by Michelle Kerns. Ford Ranger 4X4s have been popular with truck owners since they were first introduced by the Ford Motor Co. in the mid-1960s. Problems with Ford Rangers can arise with either the low or high 4X4 system or the automatic or manual hubs. If you are having problems with your 4X4, follow these steps to diagnose the trouble.
Determine if the 4X4 system can be shifted to 4X4 high by pressing the 4X4 button. The dash and 4X4 buttons should light up. If they do not, one of the following is faulty: the dash button, the 4X4 module or the shift motor. To determine which of these three is malfunctioning, have your friend sit near the module.
How many miles does a 2000 Ford Ranger drive?
1st owner drove an estimated 16,784 miles/year • 2nd owner drove an estimated 20,705 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 2,188 miles/year • 5th owner drove an estimated 0 miles/year.
When was the last time I serviced my 2000 Ford Ranger?
1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 45,381 miles/year • 3rd owner drove an estimated 8,937 miles/year. Last serviced at 122,427 miles in Asheville, NC on 07/10/20 • Vehicle serviced • Oil and filter changed. Mileage: 133,000 miles Body Type: Pickup Color: Gold Engine: 6 Cyl 3.0 L Accident reported.
Where was the 2000 Ford Ranger XLT purchased?
No accident or damage reported to CARFAX. 1st owner purchased on 08/11/00 and owned in MS until 07/07/08 • 2nd owner purchased on 07/07/08 and owned in TN until 08/16/16 • 3rd owner purchased on 08/16/16 and owned in WA until .
Are there any problems with the Ford Ranger?
Check out our Ford Ranger overview to see the most problematic years, worst problems and most recently reported complaints with the Ranger.
How many miles does a 2003 Ford Ranger drive?
1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 0 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 3,647 miles/year • 5th owner drove an estimated 0 miles/year • 6th owner drove an estimated 0 miles/year.
When was the last serviced 2003 Ford Ranger?
1st owner drove an estimated 13,299 miles/year • 2nd owner drove an estimated 7,447 miles/year • 3rd owner drove an estimated 6,031 miles/year. Last serviced at 137,972 miles in Durham, NC on 10/26/20 • Vehicle serviced • Maintenance inspection completed • Engine oil/fluid leak checked • Transmission range sensor checked.
Where did the 2003 Ford Ranger Edge come from?
1st owner purchased on 02/14/03 and owned in FL until 08/04/04 • 2nd owner purchased on 09/16/04 and owned in FL until 08/29/14 • 3rd owner purchased on 03/07/15 and owned in FL until .
What are the control arms on a Ford Ranger?
Independent unequal length control arms, coil springs, shock absorbers and stabilizer bar. Torsion bar on select models (Edge) Outside Rotor Diam (in.)
What are the dimensions of a Ford Ranger?
Independent unequal length control arms, coil springs, shock absorbers and stabilizer bar. Torsion bar on select models (Edge) Outside Rotor Diam (in.) Inside Rotor Diam. (in.) Total Swept Area per Axle (sq. in). Fuel Capacity (gal.) Dimensions and capacities are in inches unless otherwise noted.
Independent unequal length control arms, coil springs, shock absorbers and stabilizer bar. Torsion bar on select models (Edge) Outside Rotor Diam (in.)
Independent unequal length control arms, coil springs, shock absorbers and stabilizer bar. Torsion bar on select models (Edge) Outside Rotor Diam (in.) Inside Rotor Diam. (in.) Total Swept Area per Axle (sq. in). Fuel Capacity (gal.) Dimensions and capacities are in inches unless otherwise noted.
How big is a 2003 Ford Ranger XLT?
Used 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft Prices | Kelley Blue Book See pricing for the Used 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft. View local inventory and get a quote from a dealer in your area.
What kind of rating does a Ford Ranger get?
Regular cab models earn a five-star side-impact rating. In terms of rollover ratings, 2WD Rangers gave been given a three-star rating, while 4WD models get only two stars. Interior Design/Special Features: Lifted straight from the previous-generation Explorer, the Ranger’s dashboard is functional. Controls are easy to spot, understand and use.
Used 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft Prices | Kelley Blue Book See pricing for the Used 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 2003 Ford Ranger Super Cab XLT Pickup 2D 6 ft. View local inventory and get a quote from a dealer in your area.
Pre-owned Ford Ranger SuperCab models are available with a 4.0 L-liter gas engine or a 3.0 L-liter flex-fuel (FFV) engine, with output up to 207 hp, depending on engine type. The Used 2003 Ford Ranger SuperCab comes with four wheel drive, and rear wheel drive. Available transmissions include: 5-speed automatic, 5-speed manual.
Regular cab models earn a five-star side-impact rating. In terms of rollover ratings, 2WD Rangers gave been given a three-star rating, while 4WD models get only two stars. Interior Design/Special Features: Lifted straight from the previous-generation Explorer, the Ranger’s dashboard is functional. Controls are easy to spot, understand and use.
Why does my Ford Ranger stall all the time?
One of the most common issues your Ford Ranger is likely to develop is a stalling problem. The most challenging part of diagnosing a stalling problem is reproducing the conditions that led to the stall in the first place. Stalls can happen at any time, and it can be incredibly jarring when it does happen.
Where is the throttle position sensor on a Ford Ranger?
Your Ford Ranger uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.
What’s the price of a 2003 Ford Ranger?
TrueCar has 45 used 2003 Ford Ranger s for sale nationwide, including a XLT Appearance Supercab 4-Door 3.0L RWD and a XL Supercab 2-Door 3.0L RWD. Prices for 2003 Ford Ranger s currently range from $2,995 to $13,996, with vehicle mileage ranging from 33,663 to 244,217.
Can a Ford Ranger be swapped for a 4WD?
I forgot to mention the original motor is 2003 Ford Ranger with flex fuel 3.0L V6 (2wd) and the motor I am replacing it with is a Ford Ranger 4.0 V6 (4wd). Is the swap still possible? 8 people found this helpful.
Can you put a Ram 1500 in a Ford Ranger?
Is it possible to put a 2010 ram 1500 5.7l hemi fit inside a 97 Ford ranger xlt 2 people found this helpful. can I swap a ford ranger v6 with a mistubishi v6 1 people found this helpful. Can put 2000 ford ranger motor in 2006 ford ranger
2001 Ford Ranger–automatic transmission, remove ignition key and it can easily be taken out of park. Key in ignition with engine running, I no longer have to press the brake to get into any gear. I have experienced this same problem in February 2003 when it was repaired by local Ford dealer.
If the LED lights flashed, then stopped after four or five times, the module is functioning properly and you will need to check other parts such as the shift motor, magnetic clutch, wiring harness and 4X4 switch to determine the cause of the problem.
What are the problems with the automatic transmission on a Ford Ranger?
Automatic transmission doesn’t maintain enough pressure to prevent the vehicle from rolling forward or backwards. Extreme pressure to the gas is need to rebuild the pressure in the transmission to stop the rolling action. See all problems of the 2006 Ford Ranger .
What causes the crank position sensor on a Ford Ranger to fail?
The crank position sensor fault could be caused by any of the following: Dirty toothed gear on the flywheel. You can purchase the Crank Position Sensor for a Ford Ranger/Mazda BT50 here. The EGR and DPF failures experienced on Ford Rangers are not Ford Specific and a common problem across most modern, sophisticated diesel engines.
What causes a Ford Ranger to lose power?
1 Intake Pipe cracks causing the engine to go into limp mode and lose power. 2 Oil Pump will not prime if the oil is left to drain for longer than 10 minutes which could result in catastrophic engine failure. 3 Crank Position Sensor failure causes the engine to shut off without any warnings 4 EGR Failure
Are there any problems with the Ford Ranger 3.2?
Ford Ranger T6 3.2 Auto Gearbox Problems Owners of the 3.2 T6 Ford Ranger have been reporting unpleasant driving experiences with the automatic transmission. The engine is reported to feel underpowered and the acceleration delayed. Reports of unsynchronized speeds and slippage between engine speeds and actual speeds have been common.
What to do if your Ford Ranger has a gearbox problem?
Take your Ford Ranger to your nearest automatic gearbox specialist to carry out tests on the solenoid, electronic control module as well as the torque converter. You might need to visit your dealership if the vehicle is still under warranty. Good luck with that! The latest software update might also be a quick and easy solution.
What causes jerky shifting in a Ford Ranger?
Jerky shifting has been reported when changing from (P) Park to (R) Reverse and from (P) Park to (D) Drive. If you would like to know what the exact cause of the above-mentioned phenomenon is and how it can be rectified, please continue reading. Let’s kick start with the Ford T6 3.2 version of the Ranger equipped with the auto transmission.
How many miles can a used Ford Ranger last?
If you’re in the market for a used Ranger then this article might help you. Ford Rangers are well built trucks and can easily last over 200k-250k miles if they are well maintained. Earlier models suffered from timing chain and transmission issues. T6 Rangers had transmission and Turbo problems with early models.
Which is the worst year for Ford Ranger?
Make sure you get one with an extended warranty. The 1999 recorded the most amount of complaints which makes it appear as if it was the worst year, however they were mainly electrical at higher mileage and wipers having a mind of their own. The 2002 model was actually the worst model of the lot recording the most expensive repairs at lower mileage.
What are the features of a 2003 Ford Ranger?
A popular seller in the compact pick-up truck category, the 2003 Ford Ranger rolls into the new model year with plenty of enhancements, including a quieter ride, freshened interior upholstery, and upgraded brakes for improved performance.
If you’re in the market for a used Ranger then this article might help you. Ford Rangers are well built trucks and can easily last over 200k-250k miles if they are well maintained. Earlier models suffered from timing chain and transmission issues. T6 Rangers had transmission and Turbo problems with early models.
The 99 model was riddled with electrical problems as well as engine and interior related issues. Moving a bit forward in time and the 2001 was the second worse year for the Ranger. The most complaints logged was related to transmission problems, followed by interior accessories problems.
Is the Ford Ranger hard or delayed shifting?
Had a little girl and she just turned one, that has taken most of my free time. The delay in reverse happens every time, as does the harsh delayed shift. Honestly I think it got worse in two weeks of sitting in my driveway. The fluid level is spot on.
Why does my Ford Ranger go into reverse?
Spring tension of the shift indicator would pull it out of “park” as soon as the lever was released. Shifter would go into “neutral” and “reverse” at random. Had to shut off the vehicle and restart when I left car even briefly – not something drivers normally do. Vehicle popped into “neutral” about 75 to 100 times and into “reverse” about 50 times.
Is the gear shift on a Ford Ranger working?
Gear shift ought to work without failure for the life of the vehicle. Ford and its dealers do not have any measures in place to address this failure and instead try to push off corrective action, leaving the vehicle owner with a hazardous condition.
Spring tension of the shift indicator would pull it out of “park” as soon as the lever was released. Shifter would go into “neutral” and “reverse” at random. Had to shut off the vehicle and restart when I left car even briefly – not something drivers normally do. Vehicle popped into “neutral” about 75 to 100 times and into “reverse” about 50 times.
Are there any problems with the 2001 Ford Ranger?
See all problems of the 2001 Ford Ranger . On or about 8/1/05 I parked my 2000 Ford Ranger XLT in my driveway and got out to open the gated parking space at my residence. Vehicle jumped into reverse and backed into the street. Managed to stop it but injured my knee.