How to connect Auxillary power on 2008 Chevrolet Silverado?

If you do not have power at the 7-way on your vehicle you will want to check a couple of connections under the hood to complete the trailer wiring package on your vehicle.

What kind of power wiring does a Silverado trailer use?

Trailer Power Wiring 2007 to 2013 Chevy Silverado 12 volt auxiliary. – YouTube Trailer Power Wiring 2007 to 2013 Chevy Silverado 12 volt auxiliary. If playback doesn’t begin shortly, try restarting your device.

Is the aux power pin for on a 7-way trailer connector?

But as long as nothing is drawing power on that circuit it would be fine to leave hot all the time.

Where is the auxiliary wire in a Chevrolet?

Locate the wiring harness bundle, which exits the firewall underneath the brake booster. Identify the auxiliary wire, which is folded and taped to either the wiring harness or the fire wall. Use a knife to cut the tape away from the wire and unravel it.

If you do not have power at the 7-way on your vehicle you will want to check a couple of connections under the hood to complete the trailer wiring package on your vehicle.

But as long as nothing is drawing power on that circuit it would be fine to leave hot all the time.

How do you hook up a 12 V aux power?

Place the 10 mm washer on the post. Tighten the washer using a 10 mm wrench, crescent wrench, or pliers. Post size and location may vary slightly in different models. The washer will fit snuggly around the correct post. After hooking up the wire, check to make sure the 40 amp fuse is installed for the auxiliary pin.

Where is the ring terminal on a 12 V aux power?

Run the wire against the battery box. Place the ring terminal (washer end) of the wire on the right post located at the front of the battery. Place the 10 mm washer on the post. Tighten the washer using a 10 mm wrench, crescent wrench, or pliers. Post size and location may vary slightly in different models.

How does the southern truck diesel auxiliary Install Kit work?

Southern Trucks Diesel Auxiliary Install Kit is designed to connect your auxiliary diesel fuel tank to your truck’s fuel filler neck in order to provide consistent gravity feed of fuel. The kit controls the fuel level going into your OEM tank to prevent overfill. Easy installation.

How does a diesel fuel auxiliary tank work?

Connect your Diesel Fuel Auxiliary Tank (sold separately) to your vehicle’s fuel-filler neck to continually keep your tank full. All hoses and mounting hardware included. Some cutting may be required of the OEM fuel hose. For diesel fuel operation only.

What are the auxiliary switches on a ram truck?

Please try again later. Ram Trucks engineer Chris Borczon discusses auxiliary switches in Ram pickup trucks and chassis cabs, focusing specifically on how auxiliary switches work, how to program and how to connect them.