How do you remove a Mercury outboard flywheel?
How do you remove a Mercury outboard flywheel?
How to Remove a Mercury Flywheel
- Unlatch the clips that are used to secure the cover and take the cover off the motor.
- Locate the flywheel cover in the motor and remove it to expose the flywheel.
- Insert two bolts into the threaded holes on top of the flywheel.
- Loosen the flywheel nut by using an impact wrench.
How do you remove a stuck flywheel from an outboard motor?
Use a match-line to ease re-installation. Loosen the bolt, remove the timing pointer and tighten the bolt snugly with a Torx screwdriver. Remove the flywheel nut cover. While holding the flywheel steady with a flywheel holder, loosen and remove the flywheel nut with an adjustable wrench.
What causes an outboard motor to seize?
Rust and corrosion are the biggest causes of an outboard seizing, but they can also seize from overheating, running out of oil or gearbox troubles. This video covered seizing caused by water in the fuel causing the pistons and rings to fuse to the inside of the cylinder bores. Then a piston will “seize” in a cylinder.
How do you remove a flywheel from a Mercury outboard motor?
You can remove the flywheel from a mercury outboard motor by keeping the flywheel stationary and using a special tool called a flywheel puller. Step 1 Unlatch the clips that are used to secure the cover and take the cover off the motor. Step 2
How do you remove a flywheel from a puller?
Take a strain on the puller with a pipe wrench, turning the puller’s center drive counterclockwise until the flywheel is free from the crankshaft. Lift the flywheel from the crankshaft and remove the Woodruff key from the recess in the crankshaft. Stash the Woodruff key for the re-installation of the flywheel.
Can a universal flywheel puller be used on a Mercury?
If you cannot find a flywheel that is specific to a mercury you can use a universal flywheel puller. Do not strike the bolt in the center of the flywheel puller with a hammer or other object because you can damage the crankshaft. Cameron Easey has over 15 years customer service experience, with eight of those years in the insurance industry.
How big is a flywheel holder on an outboard?
In this situation, the flywheel holder is like a pry bar with a pivoting arm that is used to lock into the teeth of the ring gear. Whatever flywheel holder is used, it has to be particularly strong, as the flywheel nuts on these models are tightened to between 120 foot-pounds and 125 foot-pounds.
You can remove the flywheel from a mercury outboard motor by keeping the flywheel stationary and using a special tool called a flywheel puller. Step 1 Unlatch the clips that are used to secure the cover and take the cover off the motor. Step 2
If you cannot find a flywheel that is specific to a mercury you can use a universal flywheel puller. Do not strike the bolt in the center of the flywheel puller with a hammer or other object because you can damage the crankshaft. Cameron Easey has over 15 years customer service experience, with eight of those years in the insurance industry.
Where can I buy Mercury outboard motor parts?
Mercury Outboard Parts and Mercury Marine Motors are among the most popular outboard motors for sale today. When you are looking for specific Mercury Marine Part Numbers, why pay the normal high prices for OEM Mercury Marine Parts & Accessories when you can shop PPT online for huge discounts and free shipping.
What’s the best way to remove a flywheel?
Loosen the flywheel nut by using an impact wrench. Once the nut is loose remove the impact wrench and turn the flywheel nut by hand to remove it.
