Most popular

When did the Chevy S-10 Blazer II come out?

When did the Chevy S-10 Blazer II come out?

The S-10 Blazer II model is a car manufactured by Chevrolet, sold new from year 1995 until 1997, and available after that as a used car.

Are there any problems with the Chevy 4.3 Vortec engine?

The 4.3 Vortec engines made from 1996-2002 (L35 and LF6) have been reported to have engine knock problems. In a properly functioning engine, fuel burns in even pockets instead of all at once. The pockets burn in even timing, in sync with engine cycles. Engine knock occurs when the fuel burns unevenly and out of sync with the engine cycles.

What’s the top speed of a Chevy Blazer?

With a fuel consumption of 13.6 litres/100km – 21 mpg UK – 17 mpg US (Average), 0 to 100 km/h (62mph) in 10.1 seconds, a maximum top speed of 112 mph (180 km/h), a curb weight of 4299 lbs (1950 kgs), the S-10 Blazer II 4.3 has a naturally-aspirated Inline 6 cylinder engine, Petrol motor.

Is the Chevy Vortec 4300 a reliable engine?

Chevy Vortec 4300 (4.3L V6) Engine Reliability Overall, the 4.3 vortec is a very strong and reliable motor, proven by it being the longest lasting production vortec engine. Generally, these engines are extremely capable of lasting up to 300,000 miles.

Is the 95 Blazer compatible with the S-10?

So the 95 Blazer is fitted with a crank sensor hole in the timing cover, where as the earlier models were not, and the timing cover on the 95 does NOT match up to the block on earlier models. So you all had it right, I would not be able to do this swap without changing the wiring harness. So I have now dropped that ideal.

The 4.3 Vortec engines made from 1996-2002 (L35 and LF6) have been reported to have engine knock problems. In a properly functioning engine, fuel burns in even pockets instead of all at once. The pockets burn in even timing, in sync with engine cycles. Engine knock occurs when the fuel burns unevenly and out of sync with the engine cycles.

Can a 93 Blazer be converted to a 4.3L?

Luckily I found someone who has already made this attempt, they tryed to convert a 93 Blazer 4.3L Vin W to a 95 Blazer that had a blown 4.3L Vin W. Here is there findings: “Well the upper intake (plenum) is the same, as well as the fuel feed lines that run from the rear of the lower intake to the injector.

What’s the difference between a 93 and 95 Blazer?

The ’95 cover is plastic, and has 6 mounting bolts. the ’93 cover is metal, and has 10 mounting bolts.” GNXdreamin March 20, 2011 (automotive forums dot com) So the 95 Blazer is fitted with a crank sensor hole in the timing cover, where as the earlier models were not, and the timing cover on the 95 does NOT match up to the block on earlier models.

What are the specs of a 2004 Chevy’s 10?

Key Specs. of the 2004 Chevrolet S‑10. Base trim shown. Body Type: Truck See similar vehicles. Combined MPG: 17 Combined MPG. Engine: 190-hp, 4.3-liter V-6 (regular gas) Drivetrain: 4×4. Towing Capacity: 5,200 lbs.

Can a GMC Blazer be used in a Chevy S10?

Because the Chevy S10 has practical hardware, you can use components that are designed for other automobiles to power an S10 truck. Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well.

How big is the engine on a Chevy S10?

Engine 4.3L VIN X 8th Digit Opt LU3 134K MILES!! Fits 03-07 EXPRESS 1500 (Fits: Chevrolet S10) Chevrolet parts manufacturers design a variety of motors that are meant to increase the power, speed, and torque in your vehicle.

How many miles does a 2004 Chevy S-10 Blazer have?

2004 Chevy S-10 Blazer 4×4 in Beige with 178,000 miles at Roland Rich FordStop by Roland Rich Ford to take this 2004 Chevy S-10 Blazer for a test drive. This S-10 Blazer comes with a 4.3L V-6, Automatic OD, & near new tires.Come see your friends today at Roland Rich Ford in Delavan Illinois.

What kind of car is a 2004 Chevy Blazer?

Description: Used 2004 Chevrolet Blazer LS with AWD/4WD, Rear Bench Seats, Fold Flat Rear Seats, 5000lb Towing Capacity, Alarm. 2004 Chevy S-10 Blazer 4×4 in Beige with 178,000 miles at Roland Rich FordStop by Roland Rich Ford to take this 2004 Chevy S-10 Blazer for a test drive.

What kind of engine does the Chevy S-10 Blazer have?

The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.

Can a 1996 Blazer be used in a Chevy S10?

Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well. The 2003 Sonoma also has hardware that fits the S10 pickup.

What kind of truck was the 1995 Chevy S10?

Description: Used 1995 Chevrolet S-10 with Standard Cab. GR Auto Gallery is pleased to present this 1994 Club Cab Chevrolet S10 pickup for purchase. The S10 was a compact pickup truck produced from 1982 to 2005 (actually still produced in Brazil). It was the first compact truck made by the big three American manufacturers.

What’s the price of a 1990 Chevy S10 Blazer?

A: The top sale price was $45,000 for a 1990 Chevrolet S10 Blazer on March 25 2017. Q: What is the lowest sale price of a Chevrolet S-10 Blazer? A: The lowest recorded sale price was $2,200 for a 1999 CHEVROLET BLAZER on January 19 2020.

Is there a 1988 GMC Jimmy S10 Blazer for sale?

1988 Prostreet GMC Jimmy/ s10 Blazer I have relisted this truck because it was allegedly purchased by a 5 year old and he couldn’t come up with the funds to finish the deal! Please if you don’t have the funds to purchase, do not click on anything!

Description: Used 1995 Chevrolet S-10 with Standard Cab. GR Auto Gallery is pleased to present this 1994 Club Cab Chevrolet S10 pickup for purchase. The S10 was a compact pickup truck produced from 1982 to 2005 (actually still produced in Brazil). It was the first compact truck made by the big three American manufacturers.

Where did the 1995 Chevy Blazer come from?

No accident or damage reported to CARFAX. 1st owner purchased on 11/15/94 and owned in IN until 06/27/95 • 1st owner drove an estimated 0 miles/year • 2nd owner drove an es… Last serviced at 84,345 miles in Bourbonnais, IL on 11/07/20 • Ve…

What kind of car is a 2001 Chevy S-10?

Description: Used 2001 Chevrolet S-10 LS with Rear Bench Seats, 6ft Bed, Extended Cab, 2500lb Towing Capacity. Clean CARFAX. RWD 5-Speed Manual with Overdrive Vortec 2.2L I4 SFI Flex Fuel22/28 City/Highway MPG Description: Used 2001 Chevrolet S-10 LS with Rear Bench Seats, 6ft Bed, Extended Cab, 2500lb Towing Capacity.

Where can I buy a used Chevy S-10?

4×4 SUPER CONDITION All of Buck Chevrolet’s used cars go through a thorough safety, mechanical, and cosmetic inspection. Vehicle history reports will be provided upon request at our facility. Please take a moment to enlarge and view all of the photos and video.

When did the S10 air intake system come out?

FREE Shipping Performance 2PC Design Cold Air Intake Filter System for 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Chevy S10 S-10 Blazer Pickup With 4.3L V6 Engine (Blue Filter & Accessories) 4.0 out of 5 stars2

What kind of air intake does a blazer have?

PERFORMANCE AIR INTAKE KIT FIT 1997-2003 CHEVROLET S10 BLAZER 2.2L / 1997-2003 GMC SONOMA 2.2L / 1996-2000 ISUZU HOMBRE 2.2L ENGINE (BLUE) 4.1 out of 5 stars36 $54.98$54.98

FREE Shipping Performance 2PC Design Cold Air Intake Filter System for 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Chevy S10 S-10 Blazer Pickup With 4.3L V6 Engine (Blue Filter & Accessories) 4.0 out of 5 stars2

PERFORMANCE AIR INTAKE KIT FIT 1997-2003 CHEVROLET S10 BLAZER 2.2L / 1997-2003 GMC SONOMA 2.2L / 1996-2000 ISUZU HOMBRE 2.2L ENGINE (BLUE) 4.1 out of 5 stars36 $54.98$54.98

Who was the original owner of the Chevy Blazer?

1st owner drove an estimated 5,956 miles/year • 2nd owner drove a… No accident or damage reported to CARFAX. 1st owner purchased on 11/15/94 and owned in IN until 06/27/95 • 1st owner drove an estimated 0 miles/year • 2nd owner drove an es…

When did the S10 Blazer change its name to the LS?

Also, the “S-15” name was dropped from the Jimmy. The S10 Blazer also introduced an upscale Tahoe and Sport trim packages, the Tahoe LT, which was rebadged as the LT in 1995 whilst the Tahoe package was renamed as the LS.

What kind of truck is the Chevy S-10?

The Chevrolet S-10 is a compact pickup truck that was produced by Chevrolet. It was the first domestically built compact pickup of the big three American automakers.

The S-10 Blazer II model is a car manufactured by Chevrolet, sold new from year 1995 until 1997, and available after that as a used car.

What kind of car is 1993 Chevy S10 Blazer?

1993 Chevy S10 Blazer 4dr Tahoe LT, 2wd, nice clean truck, garage kept since day 1, great body and paint, nice original leather interior, loaded with options, power windows and locks, digital dash,… More Info ›

What kind of car is a 1995 Chevy Blazer?

Accident History: This vehicle has 1 reported accident. Number of Previous Owners: This vehicle has multiple reported owners. Usage Type: This vehicle was used by an individual. Clean Title: No title issues reported. Description: Used 1995 Chevrolet Blazer with AWD/4WD, 5000lb Towing Capacity.

1988 Prostreet GMC Jimmy/ s10 Blazer I have relisted this truck because it was allegedly purchased by a 5 year old and he couldn’t come up with the funds to finish the deal! Please if you don’t have the funds to purchase, do not click on anything!

What kind of transmission does the Blazer 2 have?

The power is transmitted to the road by the all wheel drive (AWD) with a 5 speed Manual gearbox. On the topic of chassis details responsible for road holding, handling behavior and ride comfort, the S-10 Blazer II has Independent. Double Wishbones. anti-roll bar. Torsion bar front suspension and rigid axle.

Where can I buy a 1988 Chevy S10 Blazer?

1988 Chevrolet S-10 Blazer Sport 4WD Vehicle Description SPORT, 4.3 LITER 6CYL BLAZER, 2DR, 4WD, ALLOY WHEELS, AUTO, ONLY 46,702 MILES, VERY NICE S-10 BLAZER Visit Miller Brothers Auto sales online at www.millerbrothersauto.com to …Description Thank you for your interest in this vehicle.

What kind of car is a 1998 Chevy Blazer?

Trans Description Cont. Again Electronic Looking for other models of the Chevrolet Blazer?

Where was the Chevrolet S-10 Blazer pickup truck made?

Chevrolet S-10 Blazer. The S-10 Blazer and S-15 Jimmy were based on the Chevrolet S-10 and GMC S-15 pickup trucks and were manufactured in Pontiac, Michigan; Linden, New Jersey; Moraine, Ohio; Shreveport, Louisiana; Ingersoll, Ontario, Canada; Ottawa, Ontario, Canada; Oshawa, Ontario, Canada; and São Paulo, Brazil .

What was the name of the 2002 Chevy Blazer?

The TrailBlazer name was previously used on step-up Blazers. But GMC dropped its Jimmy — the automaker’s equivalent of Chevy’s Blazer — when it introduced the midsize 2002 Envoy. The 2002 Blazers come in LS and Xtreme trims.

Is the Chevy S10 Blazer LT for sale?

Description Snatch a deal on this 1993 Chevrolet S-10 Blazer LT before someone else takes it home. Spacious but easy to maneuver, its dependable Automatic transmission and its trusty engine have lots of personality for a bargain

Where did the 2002 Chevy S-10 come from?

1st owner purchased on 02/15/02 and owned in MI until 08/19/03 • 2nd owner purchased on 12/09/03 and owned in WA until 11/17/08 • 3rd owner purchased on 02/04/09 and owned in OR until .

When did the Chevy Blazer come out in the US?

GMC S-15 Jimmy 2-door Chevrolet introduced the S-10 Blazer in 1982 along with its rebadged variant, the GMC S-15 Jimmy, and S-10 pickup truck, the latter replacing the Isuzu -based Chevrolet LUV. The Blazer and Jimmy appeared as 1983 models.

So the 95 Blazer is fitted with a crank sensor hole in the timing cover, where as the earlier models were not, and the timing cover on the 95 does NOT match up to the block on earlier models. So you all had it right, I would not be able to do this swap without changing the wiring harness. So I have now dropped that ideal.

The ’95 cover is plastic, and has 6 mounting bolts. the ’93 cover is metal, and has 10 mounting bolts.” GNXdreamin March 20, 2011 (automotive forums dot com) So the 95 Blazer is fitted with a crank sensor hole in the timing cover, where as the earlier models were not, and the timing cover on the 95 does NOT match up to the block on earlier models.

Luckily I found someone who has already made this attempt, they tryed to convert a 93 Blazer 4.3L Vin W to a 95 Blazer that had a blown 4.3L Vin W. Here is there findings: “Well the upper intake (plenum) is the same, as well as the fuel feed lines that run from the rear of the lower intake to the injector.

What kind of engine does a Chevy Blazer have?

High displacement V6 makes pathetic engine noise and only gets 190 horsepower, pretty lame driving experience but you can really tell it’s a crowd pleaser. MPG isn’t fantastic, but don’t even think about putting premium gas in it, it doesn’t like it. Foldable rear seats allow for ample storage.

When did the GMC Sierra get a 4.3L engine?

The most recent change to the 4.3L Vortec came in 2014, called the Gen V of the V6 engines, and this is now available as the base model for Chevrolet Silverado and GMC Sierra trucks.

How does a Chevrolet S10 engine get remanufactured?

Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet S10. Remanufactured Engines are completely disassembled & put through the same process every time. All heads, blocks, cranks and cams are machined & wear parts are replaced.

What to look for in a Chevrolet S10?

When it comes to your Chevrolet S10, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Remanufactured Engine product and part brands so you can shop with complete confidence.

How to troubleshoot a Chevy S-10 Blazer ignition system?

Attach the black (negative) and red (positive) clips on the tester to the battery. Turn the key to the “Run” position and touch the probe end of the tester to the two wires on the coil by inserting the probe into the back of the electrical connector.

Author Image
Ruth Doyle