When do you turn on the tail lights?

They are turned on whenever the head lights are on. When stopping, the tail lights have a bright red appearance compared to a dimmer red appearance when the vehicle is in motion.

How are the tail lights and dash lights connected?

Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. Make certain to use the exact replacement dashboard light fuse to avoid the potential of electrical failure in your vehicle’s dashboard.

Where are the lights on the dashboard located?

Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.

What color are tail lights on a vehicle?

Tail lights are red lights on the back of a vehicle. They are turned on whenever the head lights are on. When stopping, the tail lights have a bright red appearance compared to a dimmer red appearance when the vehicle is in motion.

Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. [ [Image:Fix Dashboard Lights That Won’t Light Step 2 Version 3.jpg|center]]

What to do if your dashboard light does not work?

A blown fuse can disable the vehicle’s dashboard light. The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.

Where is the dimmer switch on the dashboard?

Locate the dimmer switch for your lights. Most vehicles have a dashboard light control switch that will dim the dashboard lights as well as turn them off. Find the control switch, dial, or knob, which is generally located on the console near the steering column or may be part of the headlight switch.

Why is my tail light not working properly?

Common causes for this condition is a loose fitting bulb inside the socket. To test for this condition expose the tail light bulb in question. Next, switch the tail lights on and move the bulb around slightly in the socket. If the bulb flickers tighten the socket or replace the bulb/socket to regain proper operation.

What should I do if my tail light bulb has come loose?

If a wire has come loose, reattach it. On most new cars, the wiring harness is located behind panels in the trunk and is not accessible without removing the panels. Check the taillight bulbs. If the fuse and wiring look right, the bulbs themselves might be the problem.

What to do when your tail light flickers?

If the bulb flickers tighten the socket or replace the bulb/socket to regain proper operation. If the complete system flickers (all bulbs flicker) wiggle the tail light fuse, relay and associated wiring at the headlight/tail light switch.

When to take a tail light bulb to the mechanic?

If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.

What should I do if my tail light is not working?

When most people experience problems with their car’s tail lights, usually replacing the bulb with a new one corrects the problem. However, sometimes it’s more than a light bulb and in fact the fuse is causing the problems. While most car owners can tackle a bulb replacement, if the problem falls with the wiring it could get more detailed.

Why do the tail lights turn on when the car is on?

This way, the driver does not have to worry about turning on the tail lights. Tail lights are wired to the same switch that turns on the head lights, making them function easily. If you have automatic lights, the tail lights will turn on when your vehicle is on.

What’s the name of the bulb on the tail light?

Most tail lamps have stop lamp/turn indicator bulb(s), reverse lamp bulb, tail lamp bulbs, side marker bulb, and on some models a self standing turn indicator bulb. On cars where the brake and turn signal are sharing a bulb, when the bulb is burnt out, the turn signal indicator will flash faster than normal.