How do I reset my Epson HL 2130 toner?
How do I reset my Epson HL 2130 toner?
Brother HL-2130 – Reset Toner Cartridge
- Ensure the printer is turned off.
- Open the printer front cover.
- Hold the Go button while turning the printer on.
- When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
- Press the Go button two (2) times.
- Press the Go button six (6) times.
How do I bypass the low toner on a Brother printer?
- Open the front cover of the printer.
- Press the Clear / Back button.
- Press the * button.
- Press the 0 button.
- Press the 0 button.
- Close the front cover.
- This will clear the ‘Toner Low’ error and allow for continuous printing.
How do you change toner in a brother?
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine. Make sure that the machine is turned on. Open the front cover. Remove the toner cartridge and drum unit assembly from the machine. Push down the lock lever and take the toner cartridge out of the drum unit.
What should I do when I change toner in my printer?
Leave the machine for at least 10 minutes to cool down. You must ensure the machine is turned on when you replace the toner cartridge so that the machine recognizes the toner has changed. After you have just used the printer, some internal parts will be extremely hot.
Can a brother toner cartridge be replaced with a drum unit?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the toner cartridge and not the drum unit. > Click here to see information for the difference between the toner cartridge and the drum unit.
How do I Turn Off toner save mode on my printer?
Choose ” Printer Features ” from the pop-up menu. Choose ” Set 1 ” from in the Feature Sets. Check on or off the Toner Save check box. Choose ” Printer Features ” from the print options pop-up menu. Choose ” General 1 ” in the Feature Sets. Check on or off the Toner Save or Toner Save Mode check box.
